Restoration Very Rusty Hunting Knife - With Beautiful Handle
Вставка
- Опубліковано 15 тра 2022
- Hello. In this video I restored Old Rusty Hunting Knife.
I hope you'll enjoy the video and if you find any mistake in making this video just let us know what changes should we need.
#restoration
#HuntingKnife
#restore
#Knifemaking
#ASMR - Розваги
BEAUTIFUL OUTCOME from all the rust and pitted to the knife from its past.
A beautiful job is done ❤ to restore the blade.
Przepiękna jest zrobiona ta robota pozdrawiam twórcę tego filmiku 👍👍👍👍👍
Splendid video. 👍
That was heavily pitted from all the rust so you did a great job! Handle is awesome, it’s got a whole new life!!! 👍👍
Wow! Beautiful restoration on this rusty knife. The handle came out amazing. Thanks for leaving some of the pitting on the blade. It gives it character. I really enjoy watching your videos. Looking forward to your next one.
Have a fantastic week.
That’s another lovely job the handle is beautiful. Keep up the great work well done my friend 👍👍👍😊😊😊♥️
That handle came out super nice, so really good job on that. The blade itself, was a tough challenge and I think you did great with what you had to make it as nice as possible. Keep up the work
Gave a like just for bringing out the ol' railroad anvil. ;) Great job.
Good working with your experience well done thanks for sharing your experience Long live happy with your family and friends
restoration of spicy knives
cool knife ❤❤❤
Nice job, especially the handle. Thanks for shielding us from the welding arc.
what did you put in the jar when the rust was removed?
Wow beautiful out come well done
Very beautiful ! Bravo !
Excellent restoration.
Excellent work.
Looks great, well done. 👍
good work
I learned something today.
GJ.
Sudah saya like coment dan subscribe
Well done!
Beautiful work, the blade awesome.
Not crazy about the rest of the pitting being left on the blade, but overall, nice job.
Well done, sir. Very nice handle
Hey Peter took a little low a MIG welder and filled in all them craters in the blade it would look extremely better but other than that it looks pretty good and I know most people is going to say well he even calls it to lose tension no he won't cause it to lose tension if you do it properly just barely hit it fill in the pits grind them down be done with it polish it and you'll never know it ever had a pit in it I know I've done it before but good job it looks great
👍👍👍👍👍👍👍👍
A piece of Locomotive track would be a test for FIF contestants. That is hard like hell to forge a knife.
Mantaaap
Хвостовик можно было и не шлифовать, так сцепление будет лучше.
Ficou linda mas essa deformação do ferrugem eu vi uma vez um. Homem passou uma massa e ficou tudo lizinho
Keren👏
perfect
I understand sanding “cross grain” is easier than sanding with the grain, but it simply goes against everything I know about finishing wood.
It's kinda impossible to make that handle shape only going with the grain. Using a strip to go side to side is how pretty much all makers round out a handle. I'm not into gun building, but I assume they do the same with the old pistol handles.
刃の部分を平に削ったほうがもっと美しくなると思う。凸凹がありすぎではないかと思います。
На таких тисках нельзя ковать, могут лопнуть. Лучше это делать на рельсе.
Coprire la lama con altro acciaio fuso si può? Buon lavoro. Bravo.
L'acciaio fuso solidificandosi avrebbe una grana grossa, inclusioni cristalline e detriti al suo interno, potrebbe persino ossidare dall'interno.
Già le saldature, una volta sottoposte a stress fisico e termico, rischiano di "saltare".
A questo punto tanto vale riforgiare la lama da zero
@@vecchioteschio grazie.
You did a great job restoring the knife and it has a beautiful handle!
Enjoyed your video and I gave it a Thumbs Up
Is this an old Scagel handmade knife that was found buried ? If so it might be worth a few $100 even more than you might think. Restoring it might hurt the value of a genuine Scagel but not too much if it’s a solid job.
That was a lot of effort to leave a knife with such a pitted blade. The handle looks ok though.
Beautiful handle and excelent restoration 👍
What did you pour in the water for electrolysis baking soda or salt?
Where did you find that old knife?
👍ng
it would be better if it was completely under the mirror
Could have done with slightly smaller holes drilled into the handle for the Tang.
Very nice looking restoration.
Чуть получше, чем было.
Came out decent but not enough epoxy to fill in all the gaps in the tang, over all a bit sloppy.
@@Newcastle423 I can though, and I do, I dont film it and post it on YT, but hobestly you sound mad I was just offering advice lol relax bud.
Ha ha so expert
SLAVA UKRAİNE!
LET'S SUPPORT UKRAINE
Yeah... I found a mistake: electrolysis for removing rust. Waste of time and energy
Fet it mi too
Посредственно.
I wonder about leaving the deep pits. You showed us you can weld, I would've expected you to get them all.
You would have?!?
@@tango-bravo can't weld, but if I could, I would fill them, you betcha
@@milanradak269 well, he probably didn’t want to ruin the value of a hand smithed blade. Not many can make an original blade like a skilled smith in steel works. It’s not that filing the pits is needed, because can also this affect the pure blade steels? I think so, but I am not a pox expert.
Великая китайская мудрость - Когда из говнa, пытаешься сделать конфетку, на выходе, всё равно получается говнo...
зря он его шлифовал , было бы гораздо круче зделать рукоять из рога и о удалить ржавчину .
80 ill give you for it
This is not a hunting knife, it's called a bokuri, combination of a Bowie n a kukuri, I had one made for me to carry in s.e. Asia, great for jungle use n if need be as a fighting knife, also a great survival tool.
Oh wow, do you have the master degree?
I strongly doubt that you could harden the blade with those two butane torches. I tried to do it with a way smaller blade for a pocket knife from simple C75 steel with two torches and it just wouldnt heat up enough. Proper heat = proper results. I guess you knew that, otherfise you would have shown a file test along the blade. It is a nice knife and a good looking handle, also i like that you didn't fill the all the gaps on the blade but it will never hold a proper edge and therefore doesn't fulfill it's task as a hunting knife.
Wow so knowledgeable! Kudos mate, can you let us simpletons understand the meaning of the “file test”?
@@tango-bravo If a file doesn’t dig into the knife, it’s hardened fully
@@sappersilver7762 wow, why?
@@tango-bravo Well, the file only digs into soft metal, so if it glides smoothly across, it’s hardened and won’t be damaged as easily.
@@sappersilver7762 but how could a file be harder than a handforged blade of steel? Remember, this is not a factory blade but rather the creation of smith with better skills at steel
A pengéjen igen csak lett volna még mit csinálni!!! Így az igen szarul sikerült!!!
Szerintem jol nez ki, Kicsit reflektalja azt hogy ez egy oreg hasznalt darab.
dlaczego mam wrażenie że jesteś polskim rzemieślnikiem?
Kukri
Beautiful handle. Ugly blade.
Täglicher trotz Sperre Müll 💩💩💩💩💩💩👎👎👎👎 danke für nix UA-cam
Это не охотничий, а боевой нож-ятаган.
Он хорошо наносит колющие удары и рубящие по кистям рук.
At least you didn't fake this one