Hello man I've been running grins g062 phaserunner v6 ca3 setup for years and Im Wondering your opinion on the phaserunner vs the flipsky as far as power usage I'm using a 72v batt 80 amp nom 120 peak I love the phaserunner being waterproof buy feel it's not powerful goin up hills and eats the batt quick
the phaserunner is good performance and waterproof. The flipsky is a pain to waterproof and lacks ebike features but offers a similar level of performance for much cheaper. If you have a phaserunner then the flipsky 75100 pro v2 is not going to be a big upgrade. There are more powerful flipsky controllers But not that the g62 can handle.
whenever you connect the phase wires, make sure to do the Motor Detection so it learns the phases. There's no way to connect them wrong as long as you do the motor detection afterwards. I think if you did the detection and THEN changed the phase wires around (without re learning) it could be bad
i think it was only set to 30 or 35 amps. i was not full throttle very much. i havent rode this bike for 3 months and its cold out, so i dont want to break anything Lol
That was a beautiful,scenic ride😮❤
Good work!
It is good to see the BBSHD + Flipsky out for a ride.
i'm going to add a user interface for the script with QML soon stay tuned
Had the same problem with 6.5 it’s got issues 😤the 6.2 is supported by flipsky
6.05 works with my other bike, But the field weakening doesnt seem to work in 6.05, and i need that for bbshd
@@EBikeBuilder_ yes field weakening is good for top end speed 😱for raw acceleration turn it off so much more fun 🐆
Hello man I've been running grins g062 phaserunner v6 ca3 setup for years and Im Wondering your opinion on the phaserunner vs the flipsky as far as power usage I'm using a 72v batt 80 amp nom 120 peak I love the phaserunner being waterproof buy feel it's not powerful goin up hills and eats the batt quick
the phaserunner is good performance and waterproof. The flipsky is a pain to waterproof and lacks ebike features but offers a similar level of performance for much cheaper. If you have a phaserunner then the flipsky 75100 pro v2 is not going to be a big upgrade. There are more powerful flipsky controllers But not that the g62 can handle.
@EBikeBuilder_ Thank you very much for your time and response my man.I enjoy your videos
What are the chances of a controller blowing out from connecting phase wires wrong?
whenever you connect the phase wires, make sure to do the Motor Detection so it learns the phases. There's no way to connect them wrong as long as you do the motor detection afterwards. I think if you did the detection and THEN changed the phase wires around (without re learning) it could be bad
How to learn the scripting the Vesc programm ?
@@MS-pt3yh its called Lisp BM and the best resource is probably the readme github.com/svenssonjoel/lispBM
@@EBikeBuilder_ Thats hot, thank you, gona try it.
@@MS-pt3yh there is also www.lispbm.com a new site apparently
Hey Bro I have a 60 Amp Controller, should I leave the Stock Gear in the BBSHD or put a Nylon in?
i use the PEEK gear from LUNA, the stock nylon gear is really loud on high voltage
Thank you very much!!!!
hmm is your current calibrated ? the screen shows 1300w u got 20s batt times 30 line amps that shoud bne 2400 w somewhere in this range
i think it was only set to 30 or 35 amps. i was not full throttle very much. i havent rode this bike for 3 months and its cold out, so i dont want to break anything Lol
@@salviaaable the current in the top left of the VESC overlay is the motor phase current