Sub zero temperatures outside mean it's time to come back into the garage for my latest project on the little Honda - this is the CRF250L Airbox Mod...
@@TSOL_in_LOS I'm actually the worst at grammar and anything proper it was just for a laugh...if I didnt have auto correct I wouldn't even make it through life at this point lmao but this one was noticeable even to me
I`ve just bought one of these little beauties and it was watching your videos that sealed the deal. Now I just have to get all the bits to go on it. Keep up the good work.
Great Vid mate. Very detailed. Any improvements you noticed with this mod? I just ordered them and am keen to fit them. I still have stock exhaust. Changed the front sprocket to 13T and seen a massive difference for what I use the bike.
good thinking I might do this mod to my honda-what issues have you found or know about that restrict the engine power i know about the exhaust system and air filter as you have done so well
TMF, so I'm wondering does the EJK thing actually do anything above and beyond what the fuel injection does on the bike already? So the efi module must already measure air flow. Does the EJK just give you some 'tuning' presets in case you want more low end oomph? or better motorway economy? If you were to disable it now would you be able to tell the difference?
Hi, Great vids etc etc well done, but didn't see any follow up on the mods that you have been doing, for example $1000 for fmf exhaust and say $50 for the air box mod for a 3% power increase overall and 10% fuel decrease, well I simply wouldn't spend that much for such minimal results but if it was a 30% increase it might be justified. Could you give some sort of 'Performance Rating' to the mods that you have done so as to indicate weather they were doing or not!.... Cheers...Rick.
If it's extra performance you want then the FMF is the one that makes all the difference - bike is noticeably quicker with the FMF...the rest a bit "meh"
Hi Mr. flyer , I did this mod to my 2017 crf250l Rally ,and got reprimanded by the service mgr.at my dealership. He said I could get water in the airbox during rain riding even with the full fairing on the Rally.Have you ever had that issue? Thanks, Bill
Do you know if the 2020 CRF250L ABS is dual / twin spark? Do you have any input on: " For the 2020 CRF250L : Does the 305cc Big Bore kit work better with a FMF Q4 & Megabomb or not? Is you bike post 2017? Do you know if the 2020 is dual spark? Do you know of anyone that has dyno'ed the stock CRF250L (post 2017) and with the 305cc Big Bore and FMF Q4 & Megabomb and 14T/40T stock gearing? Does the 13T and/or 42T sprockets / rear tire size affect the dyno readings? Does the EJK for the 305cc BBK improve only by them selves or when exhaust mods are made?"
8:14 I just realized you did all this in a VERY COLD garage. I noticed I can see your breath, then I noticed you've got a very heavy coat on. LOL .. Hands must be numb!
Hi there, would this mod be bad for the bike with standard exhaust and no EJK? I'm planning on attempting the work of art I just watched you achieve. However I don't have an EJK (yet!) and I'm worried about the bike running way too lean.
TwoWheelTorque EJK is the way to go long term, but short term I don't think this will do any harm, I'd go for it (a good cheap mod) - I've also since removed the spark screen, another low cost mod......enjoy and ride safe! - TMF
Hi from S Africa. Did you manage to find the name of the stand? I have a KLR 650 and it's a real challenge to work on it with only the side stand. Rgds and Ride Safe .
Hi TMF, just bought a CRF250L, ordered a Yoshimura exhaust. Quick question: is the air box worth doing and what is the improvement. Also is the EJK mod worth doing ? Enjoy the videos, cheers
+Ron M. Hi Ron - The filters are from E-Bay and are unifilter airbox vents - if you just search for "UNI AIR FILTER AIR VENTS VENT ROUND AIR BOX FILTER" you should fine them...cheers - TMF
Hi TMF Can you tell me the make of the adjustable stand your using and what's the lowest height it starts at. I've lowered my crf with Kouba links so it now stands at 840mm ish and can't seem to find a stand that goes under the sump guard? Cheers Simon
I just ordered the filters and the tuner if I were to do the intake mode and the bigger snorkel mod plus take out the spark arrest on the stock exhaust what do you think the best tune will be for me?
+Sid Phu ...well you'll have to experiment, I just go with the stock tune the EJK comes with (it is pre tuned for the air box and exhaust mods if you buy the CRF specific EJK)....good luck!
SuperLubot Thanks SuperLubot - No I haven't, but it's something I may look into as I know a number of other CRF250L owners are doing that.....ride safe mate - TMF
Love you vids. Just bought a CRF250 L 2016 model and plan to do your upgrades here in the USA. Might I ask the name of your cycle stand / jack. Thank you again!
+Sandro Thanks Sandro - to be honest I haven't noticed a difference in exhaust note - that may be because the FMF is so loud, if you did this mod before the exhaust (so kept stock) I dare say you would notice a slight difference in induction noise....thanks for watching and commenting, all the best - TMF
Larry Hawkes Hi Larry - I just googled "motorcycle scissor stand" and bought it off of E-Bay, can't recall the make but it was about £90, so quite steep but well worth it....
hi love the vids great info,can i just ask what you typed in to ebay when searching for the small round filters you cut into the airbox cover. ive searched your questions but cant find anyone asking the same question thanks eddie
+funkybud77 Hi Eddie - I think I just searched on "small air filter covers" - they do seem to come and go but if you keep looking they will crop up, lots of people use them, they are quite common (I realise that's frustrating given you haven't managed to locate them!!). Good luck and all the best - TMF
Hi, I love your channel very good all round info on all types of bikes. I am looking at doing the same mods to my CRF 250 Rally, Where did you get the little filters from?
Sorry should have said on the video - they are E-Bay specials, search for "Uni Air Filter Air Vents" and you'll find 'em (come from the US but very cheap).....
Good video as usual, when we are going to see a video riding your crf on some trials? The skid plate is ready , fmf and ejk too, airbox mod done...hmm what about handguards?
Cheers Ripmax - funnily enough handguards (+ heated grips) went on today, as did a 13T front sprocket - so now I really do have no excuses!! Stay tuned....all the best - TMF
Oh that's cool, so yeah no more excuses. Looking forward for your next video, btw since you done the 13t sprocket from time to time make an inspection on the swingarm chain slider because now it will start to wear rapidly on the next few miles. Take care
A very tidy job, nice work. How are you keeping that bike so clean? Also, if I ever meet you, I'm going to have to take that panel off and rotate the filters so they are all in the same orientation. My chi is being chafed! ;)
the bike feels like it has more go after fitting the K&N air filter, and feels like a new bike... more low down power, plus quicker off the mark, i highly recommend this update... i removed the snorkel too...
+Öncü Abi PC (Yılan Herif) Thanks Yilan, very kind of you to stop by and say so. This mod just helps the bike breathe a bit more, I have the freer flowing exhaust out so you may as well gulp a bit more air in at the front end. All the best - TMF.
HI M8, would it not be better to leave the holes as they are, as the filters you fitted could restrict the airflow.. nice bike i am thinking of adding one to my stable ...
TheMissendenFlyer thanks for the quick reply! and i have a small budget so what is the best afternarket exhaust slip on/system for the crf250l, that is not too expensive?
I don't think so - the Honda is positively asthmatic out of the box needing all the help it can get, the big Beemer has no such lack of power (as far as I'm concerned). Besides it's one thing hacking about a £3.5K bike, quite another taking my drill to a £16K one!!
Think I'll leave the drill alone for the GS then, only joking lol. Great job there mate and would love to know how she responds when you do your test. As always great piece of tubery
Cheers Beans - took the little bike out earlier today and I have to say she does seem a little more perky now the air-box is done....she's getting there!
+TheMissendenFlyer GREAT MODS!!! What the filters called i searched mini filters and got all different kinds but not any with the filter on the top just side filter.
You can find them in eBay. They are call uni filter air vents UFV-6. Hope that helps out!
This bike reminds me so much of my 1987 xl250r. It even sounds just like it. That bike was bullit proof. Best bike I ever owned hands down.
Another great video. Accept we were robbed of hearing that pipe again!
Any mod should be followed by a wraaaap of the ole throttle a bit. 😀
Sorry Bryan, inexcusable omission on my part.... ;0)
Except* lol
@@brodyrichard263 grammar nazi I see....troll!
@@TSOL_in_LOS I'm actually the worst at grammar and anything proper it was just for a laugh...if I didnt have auto correct I wouldn't even make it through life at this point lmao but this one was noticeable even to me
@@TheMissendenFlyer you have been forgiven.🙂😁😷
I`ve just bought one of these little beauties and it was watching your videos that sealed the deal. Now I just have to get all the bits to go on it. Keep up the good work.
+Paul Hill Well done Paul, good choice - you HAVE to do the mods though, otherwise the bike is anaemic....
I`m on it.
Just purchased a 250L Rally looking forward to performing the mods you have put together. Excellent videos keep up the good work. Cheers!
Just bought my CRF L yesterday... love it, absolutely love it. Going to be studying your videos again today :)
Excellent, glad you like it...time to get modding!
You have a very nice channel. Congratulations from Patagonia Argentina
Thanks Lobos, good to have you along! All the best - TMF
I'm thinking of buying these uni Air Box vents. Your video has helped me make a decision. Thanks!
You're welcome....
Seen a couple of your vids now, nice job. I will certainly be reacquainting myself with them if a decide on the Honda.
awesome mod dude thanks for help just got my 2015 crf250L. Oct 4 2015.........
+Joe Black Thanks Joe - enjoy the bike, you've got to do those mods though, otherwise she won't go!!
Once again, brilliant video. I can't keep noticing your lawnmower (: plus a very nice garage, looks nice and clean unlike mine :D
Cheers Joel - glad you approve, sorry about the mover (it has to go somewhere!)....
No, it's okay. Don't want you to go through the hassle, it's a nice mower anyway!
Why would Honda have restricted the airflow in the first place? How did you know this mod (and the exhaust) were necessary?
Great Vid mate. Very detailed. Any improvements you noticed with this mod? I just ordered them and am keen to fit them. I still have stock exhaust. Changed the front sprocket to 13T and seen a massive difference for what I use the bike.
Thank you so much for very useful videos for CRF Bikers !!! 👍🇳🇵
You’re welcome!
your videos are always a great help. Thanks again brother.
+lolomcdizzle You're very welcome - glad you have found them of interest!
good thinking I might do this mod to my honda-what issues have you found or know about that restrict the engine power i know about the exhaust system and air filter as you have done so well
Geeez throw a heater in the garage bro!!
TMF, so I'm wondering does the EJK thing actually do anything above and beyond what the fuel injection does on the bike already? So the efi module must already measure air flow. Does the EJK just give you some 'tuning' presets in case you want more low end oomph? or better motorway economy? If you were to disable it now would you be able to tell the difference?
I still have some of those left over from my KLX. Seems I read something about the foam falling out of these little filters so keep an eye on them
+Richard N No problems so far but thanks for the heads up!
I love your English snobbish accent please keep it up Don't ever change
Not much I can do about the way I speak - never knew I was snobbish! Thanks for that!
Hi, Great vids etc etc well done, but didn't see any follow up on the mods that you have been doing, for example $1000 for fmf exhaust and say $50 for the air box mod for a 3% power increase overall and 10% fuel decrease, well I simply wouldn't spend that much for such minimal results but if it was a 30% increase it might be justified. Could you give some sort of 'Performance Rating' to the mods that you have done so as to indicate weather they were doing or not!.... Cheers...Rick.
If it's extra performance you want then the FMF is the one that makes all the difference - bike is noticeably quicker with the FMF...the rest a bit "meh"
THANKS I will do that this weekend!!!
Good luck!
Great channel , just a thought you could have "dremmelled " the ribs off on the inside to make space fro all of the filters.
Steve
+STEVEBLACKA Thanks Steve - and indeed you could, I just don't have one of those little Dremmel do da's ;0)
your garage is awesome.......... oh and the bike too :)
Cheers bud
Hi Mr. flyer , I did this mod to my 2017 crf250l Rally ,and got reprimanded by the service mgr.at my dealership. He said I could get water in the airbox during rain riding even with the full fairing on the Rally.Have you ever had that issue? Thanks, Bill
No never had a problem - obviously you don't want to wade through a deep river but rain is not an issue....
Do you know if the 2020 CRF250L ABS is dual / twin spark? Do you have any input on: " For the 2020 CRF250L : Does the 305cc Big Bore kit work better with a FMF Q4 & Megabomb or not? Is you bike post 2017? Do you know if the 2020 is dual spark? Do you know of anyone that has dyno'ed the stock CRF250L (post 2017) and with the 305cc Big Bore and FMF Q4 & Megabomb and 14T/40T stock gearing? Does the 13T and/or 42T sprockets / rear tire size affect the dyno readings? Does the EJK for the 305cc BBK improve only by them selves or when exhaust mods are made?"
Wow that’s a load of questions!! None of which I know the answer too! Sorry...
8:14 I just realized you did all this in a VERY COLD garage. I noticed I can see your breath, then I noticed you've got a very heavy coat on. LOL .. Hands must be numb!
+Stimpy's Garage That was a typical English summer day in the garage!
Hi there, would this mod be bad for the bike with standard exhaust and no EJK?
I'm planning on attempting the work of art I just watched you achieve. However I don't have an EJK (yet!) and I'm worried about the bike running way too lean.
TwoWheelTorque EJK is the way to go long term, but short term I don't think this will do any harm, I'd go for it (a good cheap mod) - I've also since removed the spark screen, another low cost mod......enjoy and ride safe! - TMF
Nice job. Did you adjust the fuel injection after modding exhaust and air intake or is it adjusting itself well enough?
I fitted an EJK fuel controller with a new map for these mods, seems to work quite well....
Can you please tell us the make/model of the bike stand you’re using in this video? I really need one like that. Small and handy!
Hi from S Africa.
Did you manage to find the name of the stand?
I have a KLR 650 and it's a real challenge to work on it with only the side stand.
Rgds and Ride Safe
.
SEALY MC5908 SCISSOR STAND.
Just found a response from TMF to another subscriber.
Hi TMF, just bought a CRF250L, ordered a Yoshimura exhaust. Quick question: is the air box worth doing and what is the improvement. Also is the EJK mod worth doing ? Enjoy the videos, cheers
Tom Littlefair Hi Tom - Quick answer yes and yes, improvement is more all round power - enjoy the bike! - TMF
Awesome mod! Thanks for doing this!
Que es lo que utilizas para poner en los agujeros que haces? Podrias pasarme la referencia? , gracias
Just a hole cutter - think I got it from the local hardware store….
Is it not worth removing the snorkel altogether? I've seen that mentioned by a few people. Also did you remove the fire screen from the air filter?
Yes I have now removed the snorkel and the spark screen....
Awesome! Hope she's running even better for you now dude!
Your vids are great. Very professional. Who makes the jack stand the CRF is on?
Thanks Henry - I don't know I'm afraid, it was just an E-Bay special!
Did this add any power or speed to your bike I have the same one and am trying to make it go faster/more power
Not noticably no.....
Good vid to increase the wading depth. Would it have been possible to drill the holes on the top of the air box instead?
Yes I guess so....
Hi and thanks for you channel. Very instructive. My question is about the tiny button like filters. Where do you get them? Thnx. Ron.
+Ron M. Hi Ron - The filters are from E-Bay and are unifilter airbox vents - if you just search for "UNI AIR FILTER AIR VENTS VENT ROUND AIR BOX FILTER" you should fine them...cheers - TMF
Hi TMF
Can you tell me the make of the adjustable stand your using and what's the lowest height it starts at.
I've lowered my crf with Kouba links so it now stands at 840mm ish and can't seem to find a stand that goes under the sump guard?
Cheers Simon
Cant recall off the top of my head - sorry...
I just ordered the filters and the tuner if I were to do the intake mode and the bigger snorkel mod plus take out the spark arrest on the stock exhaust what do you think the best tune will be for me?
+Sid Phu ...well you'll have to experiment, I just go with the stock tune the EJK comes with (it is pre tuned for the air box and exhaust mods if you buy the CRF specific EJK)....good luck!
As always nice vid, and nicer garage ;)
Cheers Jack - aren't everyone's garages like mine???
Great mod! Have you checked if K&N or any other aftermarket air filter has one for this bike? Cheers!
SuperLubot Thanks SuperLubot - No I haven't, but it's something I may look into as I know a number of other CRF250L owners are doing that.....ride safe mate - TMF
Is it worth doing this to a stock bike? Im only planning to get a muffler, not a full system
Nah, I wouldn't bother....
Great video man one quick question though where did you get the filters from? Wanted to do this to mine but don't want gaping holes in the box lol.
+Jamie Thanks - I got them from E-Bay, search for "uni filter air vents UFV-6".
+TheMissendenFlyer Awesome much thanks!
Love you vids. Just bought a CRF250 L 2016 model and plan to do your upgrades here in the USA. Might I ask the name of your cycle stand / jack. Thank you again!
Thanks Gomer - I checked my E-Bay purchase lists and it's a SEALEY MC5908 SCISSOR STAND - cost me £75 about 18months ago...
Why not just cut the center out, and put a mesh filter over it?
Why not indeed!
You should use a magnetic bolt tray. =). What are those circle bits you place into the airbag cover?
I assume you mean the air box filters? - available on eBay....
hi where did you get them little filters from that fit in the plastic air box?
dont worry i have just seen coments below.
good vids by the way.
+Mick Oram Thanks Mick.....
Great video. Have you noticed a difference in exhaust sound after the mod? Cheers from California
+Sandro Thanks Sandro - to be honest I haven't noticed a difference in exhaust note - that may be because the FMF is so loud, if you did this mod before the exhaust (so kept stock) I dare say you would notice a slight difference in induction noise....thanks for watching and commenting, all the best - TMF
I like your motorcycle stand, where did you get it and what brand is it? Thanks.
Larry Hawkes Hi Larry - I just googled "motorcycle scissor stand" and bought it off of E-Bay, can't recall the make but it was about £90, so quite steep but well worth it....
hi love the vids great info,can i just ask what you typed in to ebay when searching for the small round filters you cut into the airbox cover.
ive searched your questions but cant find anyone asking the same question thanks eddie
+funkybud77 Hi Eddie - I think I just searched on "small air filter covers" - they do seem to come and go but if you keep looking they will crop up, lots of people use them, they are quite common (I realise that's frustrating given you haven't managed to locate them!!). Good luck and all the best - TMF
Hi, I love your channel very good all round info on all types of bikes. I am looking at doing the same mods to my CRF 250 Rally, Where did you get the little filters from?
They were E-Bay specials!
@@TheMissendenFlyer Thanks for the quick response but my bad, Should have looked at the comments first before I made contact.
Nice mod, where you get the little filters from?
Sorry should have said on the video - they are E-Bay specials, search for "Uni Air Filter Air Vents" and you'll find 'em (come from the US but very cheap).....
Good video as usual, when we are going to see a video riding your crf on some trials? The skid plate is ready , fmf and ejk too, airbox mod done...hmm what about handguards?
Cheers Ripmax - funnily enough handguards (+ heated grips) went on today, as did a 13T front sprocket - so now I really do have no excuses!! Stay tuned....all the best - TMF
Oh that's cool, so yeah no more excuses. Looking forward for your next video, btw since you done the 13t sprocket from time to time make an inspection on the swingarm chain slider because now it will start to wear rapidly on the next few miles. Take care
will do - cheers for the heads-up!
Thanks for sharing your info.Chears Patagonia ARgentina
+lobos delaestepa You are very welcome - all the best, TMF.
hi, did you notice any noticeable increase in performance after pipe and air filter mod? or just a little bit?
+Enduro Riders Yes, huge difference after the pipe mod in particular - nothing noticeable after the air box mod though...
where did you get the 3 filters?
I got the filters from E-Bay.....
Buen Trabajo Lider..
Miguel Valenzuela Thanks! ;0)
What about 2 stroke bike like RM250?
What about it??
A very tidy job, nice work. How are you keeping that bike so clean?
Also, if I ever meet you, I'm going to have to take that panel off and rotate the filters so they are all in the same orientation.
My chi is being chafed!
;)
Jees, you're more OCD than I am! ....though now you mention it....
Get it sorted. You know you want to... :)
...already on today's "to do" list...
Hehehe, good lad! =)
*****
Chi is being chafed!
going to stick a k&n filter on to improve airflow..
+such is life Let me know how it goes - will be interested to see if it makes a much of a difference?
will do, will be here in a few days..
the bike feels like it has more go after fitting the K&N air filter, and feels like a new bike... more low down power, plus quicker off the mark, i highly recommend this update... i removed the snorkel too...
Great news - will have to check one of these out - was it expensive/difficult to fit?
VERY EASY TO FIT, £55 ON EBAY
It's lean af already.
I love your videos man. Can you tell me what exactly is this mod for? If you already said that in the video i'm sorry i must have missed it.
+Öncü Abi PC (Yılan Herif) Thanks Yilan, very kind of you to stop by and say so. This mod just helps the bike breathe a bit more, I have the freer flowing exhaust out so you may as well gulp a bit more air in at the front end. All the best - TMF.
TheMissendenFlyer Do you also have to clean it up more often than you would with the stock airbox? Thanks!
+Öncü Abi PC (Yılan Herif) Nope, the little e-Bay filters stop any foreign objects getting in.....
TheMissendenFlyer Nice! I'll definetly get back to these vids once i get my bike. Ride safe!
Ok and what size drill bit do I use to make the holes
+Zeus Razor 25mm will work a treat......
HI M8, would it not be better to leave the holes as they are, as the filters you fitted could restrict the airflow..
nice bike i am thinking of adding one to my stable ...
+such is life Sure thing you could if you want to maximise airflow....just don't ride it on dusty tracks! Cheers - TMF
Where did you buy such small filters?
E-Bay...
@@TheMissendenFlyer You can send a link thanks
Where did you get the little filters?
EBay is your friend!
Where did you find those filters mate?
Paul Oake EBay ;0)
Did it make a big difference or is it unnecessary to do the airbox mod ?
...I couldn't tell any difference to be honest...
TheMissendenFlyer thanks for the quick reply! and i have a small budget so what is the best afternarket exhaust slip on/system for the crf250l, that is not too expensive?
Well I only have experience of the FMF - and that can't be called cheap (but it is, in my opinion, the best!)
TheMissendenFlyer and you say the Q4 with the mega bomb... how about the fmf powercore ?
Much the same - better for top end apparently...
what kind of bike is the other next to you there, mate?
There's two, a BMW R1200GS and a Triumph Street Triple R......
Should have removed the backfire screen on the air filter while you were at it. Liking the garage too!
Yes I have thought about that but am assuming it's there for a good reason (don't fancy my backside catching fire!!) - may go in due course......
soooooooo cooooooold ☃
what are the Air filters called and is there a place to buy them online? cheers
+DYL JARV You can find them in eBay. They are call uni filter air vents UFV-6. Hope that helps out!
+TheMissendenFlyer thanks mate!
where you get the little filters?
Ebay
haha looks fuckin cold there mate. your breath is frosty as. need a heater in your workshop!
+OldManTriple Sure is - just been out for a blat on the CRF in the snow!!! ...and I do have a heater in the garage....
+TheMissendenFlyer I'm tossing up between the CRF and the WR250R.. decisions decisions..
+OldManTriple No brainer - it's got to be the Honda!
+TheMissendenFlyer how's that a no brainer? lol
+OldManTriple Well I've got one so the Honda must be better ;0)
Great job, I wonder if the GS would like some extra breath ? Ride safe
I don't think so - the Honda is positively asthmatic out of the box needing all the help it can get, the big Beemer has no such lack of power (as far as I'm concerned). Besides it's one thing hacking about a £3.5K bike, quite another taking my drill to a £16K one!!
Think I'll leave the drill alone for the GS then, only joking lol. Great job there mate and would love to know how she responds when you do your test. As always great piece of tubery
Cheers Beans - took the little bike out earlier today and I have to say she does seem a little more perky now the air-box is done....she's getting there!
I've been involved with off shore power boat racing and we used to this to outboard motors to increase power.
I'm in good company then!
do you guys know about filter's micron value ? thanks.
What guys???
He's referring to a scientific rating of the filters, indicative of what size particles they will filter.
You're still using the larger filter inside the micron size isn't really a concern
Wouldn't it be easier to just get a k&n or something
What like this do you mean? ua-cam.com/video/MV_KctEjdcM/v-deo.html
Im Still Yet To Do This!
+BRRAP It's a simple one too - what's stopping you? ;0)
- Heard some bad things about doing it :( - even tho i dont go off road with mine anymore.. ill still think about it
We'll let it slide......"this" time.....lol
Where can I find those mini air filters
+Zeus Razor E-Bay!
+TheMissendenFlyer GREAT MODS!!! What the filters called i searched mini filters and got all different kinds but not any with the filter on the top just side filter.
+Sid Phu Hi Sid, I'm afraid I can't remember off the top of my head :0(
+TheMissendenFlyer If you find it again I would appreciate it if you make a link for me I still cant find it.
+TheMissendenFlyer so can we get the name of those Lil filters . can't find them either thanks
Nice cheap mod excellent video
Thanks Peter - cheap mods are my favourite ;0)
para que entre agua cuando pasas por un charco ayyyy
Nice one
+Big Gee ...cheap but effective....
BUY A SURUP FFS, WHEN YOU PUT YOUR SHINY HRAD DOWN IM BLINDED!
M'fraid I've no idea what you're talking about Steve - can you elaborate?
bike will die on river crossing.
Best I don't do that then ;0)
Uselesss of a mod this
Why thank you!