Black Carbon Fiber Vinyl Wrap Interior - 3M Di-Noc - Nissan Pathfinder
Вставка
- Опубліковано 7 жов 2024
- 3M DI-NOC CA-421 BLACK CARBON FIBER 4ft x 1ft Vinyl Wrap
US: amzn.to/2HMXRDj
CDN: amzn.to/2VIY7L1
3M DI-NOC CA-421 BLACK CARBON FIBER 2ft x 6ft Vinyl Wrap
US: amzn.to/2HVecpw
CDN: amzn.to/2xAk3QD (4' X 4')
Other types of vinyl color:
3M 1080 BR212 BRUSHED BLACK METALLIC 60"x12" Vinyl Wrap
US: amzn.to/2HnCg7y
CDN: amzn.to/2mnNsaT
3M 1080 Black Matte 1ft x 5ft Vinyl
US: amzn.to/2HoFpzU
CDN: amzn.to/2o2ZjLT
3M 1080 G13 GLOSS HOT ROD RED 5ft x 1ft Vinyl
US: amzn.to/2Kbnoqt
CDN: amzn.to/351ojF7
=========
3M Adhesion Promoter Primer
US: amzn.to/2JghaoK
CDN: amzn.to/2nfiC4C
Tacklife 1600W Variable Temperature Heat Gun HGP73AC
US: amzn.to/2Bycp8C
CDN: amzn.to/2mkEzii
OLFA 5019 SVR-2 9mm Stainless Steel Knife
US: amzn.to/2GuHutS
CDN: amzn.to/2o2mFBi
Black Card Squeegee With Green Micro-Fiber
US: amzn.to/2EaLzRD
CDN: amzn.to/2moYI73
IR Thermometer IR-60
US: amzn.to/2uXCd8Y
CDN: amzn.to/2o2nSbO
============
** TIPS FOR WRAPPING THE PRNDL PANEL NEXT TO THE GEAR SHIFTER:
For the gear shift indicator light holes next to the shifter, there is a piece of clear acrylic piece under the panel. The clear piece under the holes is hot melted onto the larger piece.
What you need to do is slowly drill the top part of the two posts . Use a drill bit a bit larger than that hole. Drill just enough of the top of the posts until the piece will come out (don't drill through the entire piece). There are no glue or adhesive between the two pieces.
Once that is out, to wrap into the hole, use a heat gun to heat the material & stretch it. Push the material into the hole with something like the cap of a pen that will fit into the hole. Do that several times until it stretches and conforms a bit. Now you need to make multiple small relief cuts in the middle of the hole. Heat it one more time, and use your pinky finger to get it to stick into the hole, and wrap the small little corners of the relief cut underneath. Do that for each hole. If you concerned it might lift later, you can put a bit of crazy glue underneath on the edges.
For the clear plate, place the piece back on, and use some clear 2 part epoxy and fill the top part of the hole underneath. Most epoxy will dry to handle in 20-30min.
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com...
CDN: www.amazon.ca/...
=======
Support Dial2Fast on Paypal
www.paypal.me/...
Support Dial2Fast on Patreon
/ dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.
You have one of the best automotive DIY on UA-cam. You are clear, concise and make everything look doable. Props man.
You are an artist, not only the result of the wrapping is great, also the way you made this footage is very professional!
Thank you very much for your comment!
What a drastic improvement on the look of the interior! Nice Job!! Thanks for putting this video together for us!
I am glad you enjoyed it, and thanks for your comment!
You know you just bought a 2017 Pathfinder when you’re over here watching these videos lol thanks for the pro tips and ideas 🤙🏽🤙🏽
Just bought mine 4 days ago!!! 🤣
Looks good! Try re wrapping the cup holders so the carbon pattern matches a/c controls & radio..
Thank you for putting this video together. I just did the same thing to mine and your video was a life saver.
Glad it helped
Hats off to you big guy job well done...
Looks great and way better looks sporty and you really took the time to do it right.Great Job.
Thanks for your comment!
CarPro Installs the only problem I see is the direction of the carbon fiber from the dash stack to the console.
Robert Ries oh like different directions.
CarPro Installs
Yup, center stack is from right to left and console is from left to right. You did make the corners and openings look easy...thats where I struggle.
Good job and great video ! I did not mind the length and appreciate the detail you put in as i might try this in the summer when things warm up a bit on an older Honda ! Again thanks for the extra details that most other videos leave out !
I am never surprised at what you will tackle next. This is one very cool upgrade, and appears even a novice (taking care and being smart) could do to "rehabilate" their vehicle, for not much $$. 👍👍👍👍
Thank you for your comment!
Professional finishing and video editing.
Thanks for your comment!
Your Pathfinder is looking really nice! I like the pedals too. great job.
Thanks for your comment!
You killed it DUDE!!! Awesome job!!
That is some really nice work great job !
Excellent video.
Very professional!
Great video, thanks
wow.....ok i did change my headlight and fog light to led by watching ur vids but this...is beyond my level haha...it looks fantastic tho. good work!!!
Thanks for checking out my videos. Enjoy your Pathfinder!
I hate the old wood look ... amazing job 👍🏼👍🏼
I’m really like it! Great job, great video!
I have same Pathfinder with a black interior, now thinking with color of 3M will be better... thank you for video!
Appreciate your comment!
An excellent job and looks great and thanks for a good video
Thanks for your comment!
this looks awesome! you did a great job!
Thank you!
Amazing
Excellent job
Awesome
good job
I gave u a thumbs up but the manufacturer finishing was nicer
Love your videos. Clear and clean! And also I own a Nissan 🙌🏼
Thanks for your comment!
Nice!
Nice just ordered some, wish me luck
This video is about 3 years old, how well has this wrapping turned out thus far? Has this particular carbon fiber vinyl wrapping give you any problems? Car definitely looks great
No problem. Looks the same today as you see it in the video.
Excellent work
Very nice job
Thanks for your comment!
Very nice
I hope that I can click “like” more than one time 👍🏻
Great job :)
Good job!!!!
Quick question, how has this helped up with the heat we have had in Georgia since doing this. I just got a pathfinder and was thinking to do the same
These automotive vinyl wraps are designed to withstand extreme heat and cold. My wrap looks the same as the day I installed it.
Good job :-)
Yeah but How do you do the small holes? You jumped over that part 🙈
How much material did you need for the entire interior? Did you need both 4x1 and 2x6?
I used (1) 4' x 1' and no extra material is left after I finished. Which means no mistake. You can buy more just in case.
How were you able to remove the small panel with shift positions.? 🤔
Is same process for a Honda Odyssey 05? ...... and how you did the light under the steering wheel?
How did you cut the little holes for like the park symbol?
Anyone know where I can get this done in Chicago? I would try it myself but I know it won’t come out as nice
Do you have a video for nismo badge kit install?
hello from NYC. i noticed your pedals are different with the nismo brand. what is the link for this product? Do u have a video showing this mod? thanks
Here is the install video with buying links in the description: ua-cam.com/video/YF_MUji-pcA/v-deo.html
Excellent work, about what temperature should the heat gun be set?
I am not sure exactly the temp but doesn't take a lot of heat to soften the material. On my heat gun, it's set to 7 out of 10 scale.
I dont believe you mentioned the importance of making sure the grain goes the same way on each piece. I made the mistake on my center console of not paying attention and one part went 90 degrees to the rest of the pieces in the car. On your center console, it doesnt match the radio and HVAC controls.
That's due to the width of the material. I ran into the same issue.
Did you get air bags warning light on dashboard after disconnecting wires from pass airbag light?
If you disconnect the airbag light, don't turn on the ignition or else you will get the warning light.