How To Wateproof Your Electronics (In Detail)
Вставка
- Опубліковано 6 вер 2014
- Waterproofing your RC electronics in detail. I have been doing this for a very long time and its been the best and simplest method so far. PLEASE READ ENTIRE DESCRIPTION FOR MORE INFO!
You will need:
Plasti-Dip (Liquid Electrical Tape)
100% CLEAR Silicone
Marine Grease
Tape- Electrical or Masking
Tools to take your items apart.
REMEMBER TO LET THEM DRY!
Thank you to my Sponsor: Werty Made Custom RC Fabrication & CKRC Crawlers!!
WERTY MADE'S INFO!
Werty Made Custom RC Fabrication-
eBay:
ebay.com/usr/yotaturboitis
Facebook:
/ mattakawerty
Werty Made @ CKRC
www.ckrccrawlers.com/product/...
CKRC-
FACEBOOK:
/ 674032442640092
Sales Page:
www.ckrccrawlers.com
Customer Service- (775) 870-1083
Sales- (775) 870-1068
Please Check Out RC Militia
Facebook:
/ 53442. .
UA-cam:
/ leprechaun79
Torque'd RC Media
/ torquedrcmedia
Intro done by:
Laurent Caccia
/ laurentcaccia
Thanks For Watching, Any Questions Or Comments Feel Free To Leave Them Below.
DISCLAMER: I AM NOT RESPONSIBLE FOR BROKEN/NON WORKING ELECTRONICS. DO THIS AT YOUR OWN RISK!.
As I said ive done this many times with fantastic success! - Авто та транспорт
Great video!
New subscriber watching from Al Khafji Saudi Arabia 👍
Nice video! Smart with the silicone over the light!
TOJO RC Thank You!
Good video Steven!
EVERYDAY RC Thank You!
nice video
Good video bro
Thanks, Bro. I appreciate you stopping by!
Might do this with a water flosser I just bought. Apparently, it's pretty prone to leaking and damaging the components in it (at least the electrical ones).
I didn't realize that the liquid electric tape was a thing - I should pick some up this week. :D
Hello! Very nice video! Since we don't find easily liquid tape (neither plasti dip) here where I live, is it possible to use only Silicone gel for conformal coating? What do you think? Can you remove liquid tape if you want to?
What did u use to make it waterproof and where did u get it from
Nice job Steven, great info....but I found that if you leave them in a tub for a month...they still get mess up....lol
Nice video. I like to use this method to, to make it easier they make clear liquid electrical tape....Star brite Liquid Electrical Tape Clear
negative u DO NOT want to use liquid tape. liquid tape sweats whenever it gets warm it will short out your electronics. urethane conformal coating is what u want to use its inexpensive and it's what the manufacturer uses when they waterproof there stuff
Which one do u use
I used liquid tape on my servo since it’s not water proof anyways it ws only 50$ dollars for the servo worst come to worse it’s gonna damage it or protect it win lose situation for me
What about the *other* side of the servo circuit board with that LET?
I hit both sides of the servo circuit board just to be on the safe side
How much to pay you to do my Phantom 2?
Hello! If I use a liquid tape to isolate some parts of my circuit board or my proto shield, is it going to damage the shield and its components or not? Thanks.
Islombek Karimov No, the liquid tape WILL NOT ruin parts. Ive used it on many many parts over the years and ive never had any problems.
ax5s receiver waterproof hả?
can you use clear silicone instead of plasti dip or liquid tape?
Justin V Im not sure, I however wouldn't.
I saw your question but I wasn't sure where else to put the response. Do a search for FangsCPO and DNC and you will find a few of the 5th Scale videos I was able to capture. Enjoy.
Why not just dip the entire servo in the liquid tape..or what you were using...
Great vid! Although I think you should note, Do Not Touch any of the elecronics, you build up static electricity, and if you touch them without discharging yourself you will fry out parts on the board.
Nice job Steven, great info....but I found that if you leave them in a tub for a month...they still get mess up....lol
Craig Schofield LOL, yes im sure they will. Thanks for stopping by, Craig and leaving a comment!