Skeeter School- Proper Boat Covering Tips with Tyler Anderson

Поділитися
Вставка
  • Опубліковано 26 жов 2021
  • On this episode of Skeeter School Tyler Anderson from‪@TylersReelFishing‬ goes over his method for covering and uncovering his Skeeter boat. Check it out and you just might learn something new!
  • Спорт

КОМЕНТАРІ • 23

  • @TylersReelFishing
    @TylersReelFishing 2 роки тому +1

    Hey that's me!

  • @Crankinstien
    @Crankinstien Рік тому

    Great channel!

  • @mp5kfisher241
    @mp5kfisher241 2 роки тому

    Anyone know where i can find a full motor cover? I don’t fish in the winter and i winterize my boats because they sit outside.

  • @MrBdogg317
    @MrBdogg317 6 місяців тому

    Where can I get a skeeter built cover for my new to me 03’ zx225?

  • @goodmanfishing
    @goodmanfishing 2 роки тому

    Please do a video on the different models of Skeeter bass boats and what the primary differences are. Simple layout of which model is what would be helpful, the website requires to click on every model and it isn't all the clear.

  • @prestonbonner2456
    @prestonbonner2456 Рік тому

    Pro tip... Only tighten and loosen one side of the straps. Just clip the short side, and then tighten down the other side. When it's time to remove, loosen one side and just unclip the other side without loosening them. When folding, fold the sides in all the way around, then get in the boat and roll it up from the back. Nice and neat. When putting it on, just let the cover on the nose of the boat and unroll it.

  • @BjBnet
    @BjBnet 3 місяці тому

    You know there's a handle to insert your hand inside each strap right? Where the straps attach to the cover, you can insert your hand in, pull down on the cover while you clip together the plastic buckles. In the long run there are less chances of breaking buckles.

  • @jtl101347
    @jtl101347 2 роки тому

    When you roll ur cover ‘this way any debris on top of cover fall right into ur boat better to bring cover from rear of boat Al the way to front of boat then next section all the way to front again nothing on top of cover ends up inside boat have been doing it this way for years works great

  • @jtharden1935
    @jtharden1935 2 роки тому +1

    You don't put your poles in?

  • @redbeardracing3498
    @redbeardracing3498 2 роки тому

    Where can I find this boat cover?

  • @mp5kfisher241
    @mp5kfisher241 2 роки тому

    I found some power pole covers that match the skeeter cover, made out of the same material the skeeter cover is made out of.

  • @jtl101347
    @jtl101347 2 роки тому +1

    Better to roll cover from rear all the way to front that way any debris is not rolled up on the inside of cover to damage boayfinish

  • @Ranger18361v
    @Ranger18361v 2 роки тому +1

    Can you still put gas in it with the cover on it?

    • @prestonbonner2456
      @prestonbonner2456 Рік тому

      Yes. The side flap has Velcro and can be lifted to access the fuel fill, as well as charging recepticle.

  • @bassman4201000
    @bassman4201000 6 місяців тому

    So how do you stop the dront deck from becoming a kiddie pool???

    • @a-gamecustomlures
      @a-gamecustomlures 3 місяці тому

      Mine has a padded circle spot on underside of cover with a snap where an extendable pole is attached. The pole came with the cover. This props up the cover like a tent over front deck. Same set up on back deck. Does it work? Don't know. I keep it in garage.

  • @SamAndSamuel
    @SamAndSamuel 2 роки тому +2

    You didn’t show exactly where you mount the hooks on the rear.

    • @mp5kfisher241
      @mp5kfisher241 2 роки тому +1

      On my skeeter cover i put the rear hooks down to the trailer frame.

    • @dominicdigirolamo4221
      @dominicdigirolamo4221 Рік тому

      When I bought mine the dealer connected my two hooks to each other below the motor's lower unit.