Hollyland MARS 400s pro wireless setup for best results
Вставка
- Опубліковано 27 чер 2024
- Use these 8 tips to configure your Hollyland MARS 400s pro wireless setup for best results in any location.
You can get your own Mars 400s Pro set on my amazon store here:
www.amazon.com/shop/timsimpso...
00:00 Introduction
00:33 Tip #1 - The geography your working in
02:11 Tip #2 - Make use of the Channel Scan feature
03:06 Tip #3 - Space out the Recievers to avoid interferrence
03:42 Tip #4 - Raise the Recievers above any interferrence
04:33 Tip #5 - Set your MARS 400S pairs 2 channels apart
05:09 Tip #6 - Don't use more than 3 or 4 sets in a venue
05:26 Tip #7 - Try using different Antennae for a better signal
06:11 Tip #8 - Always have a backup Plan
08:47 Thanks for Watching! Subscribe, Like and Comment!
Are you a creator? Get the most out of UA-cam and make the hard work simple with a Pro Subscription to TubeBuddy RIGHT NOW! www.tubebuddy.com/timsimpson
- CHECK OUT MY AMAZON STORE
Go to my Amazon store where you can buy the stuff I use and review. If you buy stuff from here I get a cut of the sale which goes towards paying my hungry editor
www.amazon.com/shop/timsimpson
- BUY A SKATEBOARD FROM MAVIC BROTHERS
Alpha Board from MavicBrothers - mavicbrothers.co.nz?ref=NITRO
If you buy a board, tell 'em I sent you!!
- FOLLOW ME
Twitter - / timsimpsonyt
Facebook - / timsimpsonyt
Instagram - / timsimpsonyt
- MUSIC
The music here was made by Ryan Little: / ther4c2010
Music by Ryan Little - blessings. - thmatc.co/?l=B17D9E9D
#TimSimpson #shorts #Story #retention #getmoreviews
Man, you are a great communicator brother. I’m so grateful I came upon your channel. You just do a great job. Thank you.
That wireless transmitter is useful in making videos.
awesome video thanks 🙏
Very good
Nice!
Thanks!
I love your channel :)
Thank you so much!
My guy is always showcasing the unique gadgets! That's awesome, bro.
Wouldn’t be as good without those beats brother!
Brilliant tips thanks Tim. I noticed others struggling with multiple receivers, so this separation, elevation and channel separation tips are all really valuable for a live stream environment. Using the photo background support sounds like a really great idea too, for spacing and height.
Glad it helped! It's often the simple answers that help the most and I love sharing stuff that helps people :)
Amazing, amazing video. 4 units, amazing! How long are the events and how long do the transmitter/receivers last? I was thinking of picking up a unit.
Good question! I can run them on an FP970 for about 5 hours, Some of the fight events can go a lot longer than that, so I swap out batteries in the breaks just ot be sure. For the static cameras we run them off a vLock battery or mains, so they just keep on going!
can I ask a question? - We only have 1 x 400s at the moment so we have a mixture of HDMI connected cameras ( could use SDI on a couple) and the Wireless link,, - Used it 2 or 3 times and the latency of the Wireless/hollyland connection has varied each time, First time was great for a Dance concert and usable, the next times it at a workshop it appeared to be a lot longer latency and quite noticeable, We had to time adjust the Hollyland connected camera in post. Relatively close not a huge room ( at the most 10 to 15 metres apart in either case ) any tips? I assume you're using 3/4 Wireless set ups at the same time so latency is not as noticeable
What we have to do for changing the channel or canal ?
what about hd mode,high speed mode
My Hollyland mars 400 pro Tx does not transmit any signal to my Rx. Please help