Electrolux E10 Error Washing Machine Fix
Вставка
- Опубліковано 23 сер 2024
- Electrolux E10 Error Washing Machine Fix. A quick tutorial on how to fix E10 error on Electrolux Washing Machine. This will apply to most Electrolux Front Load Washing Machines. An easily fixable error that most will be able to DIY with home tools. If your washing machine keeps filling with water or not filling with water this is how you can fix it.
Thank you so much! I was so ready to get a new machine but found your video, husband did the job as per your instructions. Machine is working well now. Part cost $105.
I just wanted to say thankyou so much for your video and your kindness in educating others, my machine stopped with e10 code and with your help i discovered the hose on the water sensor was completely off. Your a gem!
My machine was letting some water in, but never enough to see any in the bottom of the drum, and did not flow any water into the main drawer compartment to wash away the detergent powder. So I replaced the inlet valve as per your excellent instructions. (I'd not put my tools on the concrete block though, being clumsy, my pliers would end up inside the machine 😬) It works again! A satisfying click and whoosh of water now, before it was a bit feeble. Thanks so much for posting this you have saved me much money, just calling an engineer out to *look* was going to be $200 before parts, but fully booked for weeks. Peace, PD.
Awesome I’m so glad this helped you
Fantastic video! So well done! Fixed my Electrolux washer dryer by myself and I’m a woman! Thank you.
Thank you so much for helping so many of us. My water sensing pressure pipe came off and the machine is fixed. Thank you
Brilliant! Thank you so much for the guidance. Much appreciated! Our machine was clogged at the water in filter.
Glad it helped
Thankyou so much for your video, my machine is now good as new and your video gave me the confidence to attempt the job ❤
welcome glad this helped you
Thanks for the video, fixed my washing machine for $40 for the part.
Thanks so much...the water was coming into the machine but not shutting off. The tube had come off the water level sensor. Works fine.
welcome im so glad you could fix it
The hot water supply had frozen. When it thawed everything's right as rain. Knowing the e10 code pertains to a water input level or lack there of gives the right place to start checking. Thank you.
Brilliant, big thank for this fantastic help! For me it was the loose tube of the water sensor
Excellent video! Thank you very much. Very well delivered too.
You're very welcome! Glad it helped ya.
A great video, easy to follow. Our washing machine is a similar model Electrolux EWF14023 10kg. It has error code E90. The child lock is stuck on and it keeps beeping with a flashing light above the Start/Pause button. Any ideas?
@mrwashywashy what if Electrolux washer is not fillings up with much water? I’ve replaced water valve and board. Both hoses checked. Water pressure is good. Anything else I can check before getting rid of washer? Thanks
Sensor had a loose tube! Thank you!
Good day! I have thr exact same Electrolux washing machine and it stopped working completely, no spin no water coming in at all. I am wondering if you could share how can I at least enter the diagnostic mode? I just can't find any info online. Mucj appreciated 👍
Thank you so much from Việt Nam
When red light flashes with E10, I push the the start button, and the washing machine starts again normally . Would you please advise what I have to do.
Thank you
That's a super video and explanation. I have a Prima PRLD370 fitted washing machine that was installed 3 month ago. It's been intermittently returning an E10 error mostly towards the end of the washing machine cycle. Sometimes it goes through the cycle without issue. I can see water in the drum and the fact it is brand new doesn't appear to be any dirt on the valve or a kink in the piping. Do you have any thoughts where the issue might be based as it seems to be returning the error towards the cycle's end?
Great video. Thanks! Just wondering, what is the blue thing attached to the valve block. Has the 2 black wires attached to it. Is it a flow sensor?
We only get E10 on the end of wool program. What do you think it can be?
Hello, Can you help me what’s wrong for my washing machine, please? It’s 2 in 1 washing machine. Sometimes, Main wash has water fill in, but rinse isn’t. And sometimes main wash is no water fill in too, when it washing will stop and ask check the tap, sometimes will stop and I need click start/pause button to continue the process. I was checked in & out filters is no sand. And the other function is fine. 🙏🏻
How are these Electrolux machines - good or bad? Are they the same as the Westinghouse machines which are much cheaper? Are the drums sealed or repairable? Appreciate any insight you provide!
Drums are sealed and not repairable. They get some issues with electronics at times. If you get one get it with extended warranty
What if my drum actually spins on my dryer? It goes for a while and then shows me E50. I don’t get any water at all into the water tank either
Great video, Thanks for your help
Tq. Fixed my washing machine
I have E10 error. When starting a cycle, when water usually flows into the machine, it sounds different and not much water fills machine during wash. Can sometimes continue wash cycle by resuming. I found that the prewash and rinse compartment in tray is not emptied/has water. Is this still a water inlet valve issue?
Replaced the inlet valve/solenoid and washing machine is fixed! Thank you for this video. Saved buy a new machine or getting someone else to look at it and get overcharged!
Thanks I will give this a go 👍
You the man!.
Many thanks. Wish me luck.
Welcome hopefully you fix it 😃
O tempo de ciclo da minha máquina aumentou. Por exemplo, se bo ciclo dia a dia ela demorava 1h para finalizar a lavagem agora fica 1h15min. No ciclo que usava sempre era 1h55min agora fica 2h12min, está relacionado a isso? Durante a lavagem o ciclo ficava parado em e10. Removi a válvula conforme ensinou no video e testei direto na torneira, realmente a agua não passa, oarece areia. Preciso trocar a válvula então?
Yes might be a valve issue
Thank you!
Any idea how to enter diagnostic mode on this model?
I didn't know Trevor Noah was such a skilled handyman
haha yes that's his second job, got to make ends meet in these tough times
E 10 POKAZUJE SIĘ 16 MIN. PRZED KONCEM PRANIA .PRZYCZYNA?
Thanks mate, i will do this
Are AEG and this machine almost the same
Thank you!!!!
good video
Glad you like it
Hi there,I have a problem with my washing machine. I can’t use it at all it
I want to use the “wash 60” but it doesn’t function at all it keeps show me E 10 it’s already 2 days
Please help me
Thanks In advance
Hi it’s likely your water is not going into the washer. Check that tap is open. Also check for dirt buildup on the water valve
My model is EWF12753, I got E10 error, and I can resume 2 or 3 times, It can still finish washing, I have checked the pipe and sensor no problem, Is that VALVE INLET fault?
Hi yes could be the inlet valve
For me it was a seized inlet valve. I also had an E10 error but the machine would spin, and drain etc. Inlet valve was cheap to buy on eBay and easy to fit with help from UA-cam :)
Hi can you please tell me.how to use the auto dose as mine isn't doing it. Many thanks
Sorry mine doesn’t have autodose so wouldn’t be able to help
Is this easy to do with the top loader edition?
Sorry haven’t worked much with the top loader
Hello sir what's the reason why the water flowing continuesly then after a minutes there's E10 come out
it happened to me many times but when i hung up back the drain hose at the back the error was gone.. and the water don't flow like always...
raise the water outlet hose 60cm
Hi my washing machine won’t dispense anything from my drawer
Liquid, softener etc
Might not be dispensing water please check the water valve
@@askmrwashywashy oh thankyou so much for your prompt reply
my washinh machine doesnt spin now i can hear the motor but no spinning please help
Hi might be a snapped belt. Removed back cover and have a look
My problem is dashboard not reading when switch.
Like no power ?
E10 before spin cycle keep coming, its annoying, already check water pressure and water inlet is good, the error should come up during washing where water comes in not during spin cycle
It comes mid washcycle for me. On clearing the error I can get some water spray in the drawer but it's a bit weaker than normal.
👍🇦🇺🙏
Error code 40:12