How to Replace Front Brakes 1999-2004 Jeep Grand Cherokee

Поділитися
Вставка
  • Опубліковано 26 лис 2023
  • Buy Now!
    New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABFS01453
    This video shows you how to install front brake pads and rotors from TRQ on your 1999-2004 Jeep Grand Cherokee. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
    This process should be similar on the following vehicles:
    1999 Jeep Grand Cherokee
    2000 Jeep Grand Cherokee
    2001 Jeep Grand Cherokee
    2002 Jeep Grand Cherokee
    2003 Jeep Grand Cherokee
    2004 Jeep Grand Cherokee
    Tools you will need:
    • Pry Bar 1aau.to/oZZ/1AXAA00020
    • 10mm Socket 1aau.to/obpS/1AXAA00017
    • 12mm Socket 1aau.to/obKT/1AXAA00015
    • 13mm Socket 1aau.to/obKT/1AXAA00015
    • 17mm Socket 1aau.to/obKT/1AXAA00015
    • 18mm Socket 1aau.to/oar3/1AXAA00043
    • 19mm Socket 1aau.to/oar3/1AXAA00043
    • Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/oaB/1AXAA00289
    • Brake Caliper Hanger 1aau.to/okn/1AXAA00439
    • 1/2 Inch Ratchet 1aau.to/oar3/1AXAA00043
    • 1/4 Inch Ratchet 1aau.to/obpS/1AXAA00017
    • 3/8 Inch Drive Ratchet 1aau.to/obKT/1AXAA00015
    • Torque Wrench 1aau.to/oaTa/1AXAA00044
    • Brake Fluid
    • Gloves 1aau.to/oaxP/1AXSS00048
    • Safety Glasses
    • Drain Pan
    • Floor Jack 1aau.to/oag2/1AXAA00068
    • Hammer
    • Wheel Chocks
    • Wire Brush 1aau.to/ovA/1AXAA00079
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто та транспорт

КОМЕНТАРІ • 12

  • @TRQ
    @TRQ  7 місяців тому +2

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @user-kw7dl1yp5p
    @user-kw7dl1yp5p 29 днів тому

    Outstanding and worthy of special praise. You have given me the confidence to DIY my front brake pads. Many thanks.

  • @MrJskains
    @MrJskains 7 місяців тому +4

    I watched a similar video right before this one where they did not show the additional steps of greasing the pins and using a wire brush to clean off accumulate rust. Those little things make the difference between a great video and a mediocre one. Great job on showing us the right way to do this!

    • @TRQ
      @TRQ  7 місяців тому

      +@MrJskains Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

  • @stevenclayton333
    @stevenclayton333 5 місяців тому +4

    I wonder how many mechanics (Pep Boys and the like) take the extra time to clean things off and do a thorough job.

  • @rlar27
    @rlar27 2 місяці тому

    Nice video! Very well instructed and amazingly clear picture. I would recommend for higher mileage Jeeps or Jeeps doing a lot of off roading to go the extra step to rebuild the calipers. I have a 2004 and I neglected to do that last year and the left front seized up three days ago. Luckily I was close to home, so minimum damage was done. I'll be replacing both calipers tomorrow. 😫

  • @andrewmallard1974
    @andrewmallard1974 Місяць тому

    On my 99 limited they are 18mm bolts. Also I have Alan head bolts in the boots instead.

  • @Artisan1.618
    @Artisan1.618 Місяць тому

    It's important to replace both sides though, correct?

  • @69bjgmopar
    @69bjgmopar 2 місяці тому

    Great video.

  • @amirbarati4580
    @amirbarati4580 Місяць тому

    Perfect!

  • @ronmitchell8929
    @ronmitchell8929 3 місяці тому +2

    Haha, you put the tire on at the end it has the old rotor on it. ???

  • @Bigdaddywoowoo321
    @Bigdaddywoowoo321 2 місяці тому

    That’s funny my calipers have some sort of extra hardware 😂