@@cletp758 Your absolutely right but it's been so long now I doubt it'll happen, plus the X is out now. I've mentioned in a few places I will make some more of these to post out, I've 3d printed a case for them plus the batteries will be better finished 👍🏻
@@ksrnate I'm good mate ticking by as some say 👍 unbelievable mod trust you to think of it and dam right I buzz off this stuff. Screw manufacturers and their warranty crap we have the right to fix our own things. Great video hope it catches on 👍
@@Delyeri Hey thanks man 👍🏻 The board won't fit sideways unfortunately it's too long. If you do try this just be aware if you get a battery from a different supplier some are coming with cells that are slightly too big to fit in the ally! What country do you live?
@@Delyeri Go on this Rog ally group and ask the question there, I know a few people around the globe have done it so they will have links to batteries that will work 👍🏻 facebook.com/groups/556912946287139/?ref=share
@@Delyeri No mate it's plug and play. It doesn't matter what charge the stock battery had either when you take it out, I've plugged in a lot of modded batteries into my ally now and they all work perfectly showing correct percentage and other stats like full charge watt hours everything that would show in windows battery programs is all there with the modded ones 👍🏻
Why couldn’t Asus just make a 100w battery. They have the technology. I think they deliberately made a smaller battery for the OG ally just so people would want to buy the ally X
@@NoonMight Your most probably right! The first time I saw the ally battery I really didn't understand why it was so small when there's so much room. They could have fit an even bigger battery than this in there if the PCB was mounted above it horizontally. But what do we know 🤷🏻♂️
regulation. they can but it doesn't mean they can do anything. you will never see any portable device that goes above 100w. since then max capacity that you can bring to airplane is 100w. Even if they did that they will lose some several target market because 'they can't even travel with their device'.
@@astven94 That's true! But they could fit 90wh in the ally no problem. I've already made a 99wh battery for it with not much modification to the back plate
@@ezg8448 It can actually be done so the screw can be used but it's more modding! If you remove the PCB from the cells completely some of the board can be trimmed so it can be lowered enough to put the screw in. It's just more work but definitely possible
So just need to flip the wire connector and it will be ok? Regarding that top-center screw, as u already used 4 wires to re-arrange 2 battery cells, I think we can use 8 wires to connect all cells and rotate the battery board horizontally.
It won't fit that way I measured which is a shame. You could use 8 wires and lower the board, the bottom of the board is ok to be cut down as there is no chips just plain board. That way you could use the screw but is a lot more work for just 1 screw to go back in 👍🏻
First of all, thank you very much for your tutorial. I love modifications like this! I happened to have a defective Zenbok UX363JA with exactly the same battery model left over and I got to work straight away. However, I noticed that my BMS was slightly different from yours. But that wasn't the problem. The problem was the size of the cells. My cells are 47mm wide. In the Ally, however, the cells can only be a maximum of 45mm wide. So the used battery is unfortunately out of the question. What a pity! As for my battery, it is a C41N1904 15.48V with 67Wh, so it should actually be identical.
@@IBMWxM3xGTRI Hi and thank you ! Yes the different batteries from different suppliers are coming with bigger cells unfortunately we are finding this out as people do the mod, so far my link I have provided is good and there is one more link to a battery on Amazon that fits but yet to see it working. Are you in the UK?
@@ksrnate Seems so. My battery is original from Asus. It would be interesting to see which suppliers all fit into the ally. I also don't want to buy another battery that might not fit again. No, I come from Germany.
Very interesting to watch and make this mod almost easy to go for people without zny experience like me ! Good job on finding and sharing, thank ! I'm still interested to know if you kept on building some for sale (3d shell), i'm living in france.
Theres literally a 76wh battery that fits in the ROG ally with the right connector you can get on Alliexpress now, most people say it works just fine for 70$ and you just have to trim some plastic.
@@Paulitzer2040 I used toenail clippers for mine, the plastic is extremely easy to cut, I have the jsaux clear back plate and had to cut plastic from the ally shell itself to fit the battery. You really have to be careful though because theres a reason the original ally battery has the center part missing, thats where the RAM is on the board and if you cut the plastic and just put the battery in it will 100% be laying on the ram with the backplate on which is a recipe for disaster with how terrifying lithium is if it ignites. I took two of the rubber grommets from the original battery and put them on the ally next to the board so the battery would rest on them instead of the ram.... after putting my backplate on there as a tiny bulge by doing that but with screws it was fine. Honestly it immediately made me start playing my ally more, I tested it to calibrate the batter, charged to 100% and ran down to 5% running gta v for almost 3 hours at 19w. It is night and day from the stock battery and well worth the same amount of work it takes, i would suggest maybe looking into thermal pads to put on the ram to be on the safe side.
@@Paulitzer2040 oh yeah i forgot to mention the alliexpress battery doesn't seem to fast charge with the stock ally charger anymore, I have an anker 140w charger that charges it at 60w but not 65.
@@ahmed4tutu Only 3 plus I ripped apart the stock ally battery so its been an expensive journey for me! Plus I had to buy another battery for this video 🤘🏻
Yeah boy look who back on you tube lol, i could do with h bro making me some 2s batteries out of some 3s i have lol, u r a clever little 💩💩 aint ya lol great video my man
@@BIGALSCRAWLERS Hey Al 🤣 I'm not back this is just a one off! How you been pal you still bashing the shit out of that kraton 🤭 I literally don't watch RC videos anymore. Totally lost interest 😩
@ksrnate yeah still bashing when it's not broken lol, I've got really in to crawling at the min lol so I mixing the both, y is this a one off? Did some ask u to make it? U still bashing?
@@BIGALSCRAWLERS Oh dear crawling? 🤣 That's the opposite of what BigAl does! At least it'll be less time wrenching n more time crawling ! Yeh just a one time video to share this mod with Ally owners. The battery is quite a big problem so I doubt I'll be posting anything else
@@yoelmoralescondori5776 No problems at all my friend I've been using the first one I made now for over 6 months and still holds the full 67wh charge via battery report in windows 👍🏻
I wish there would be a shorter battery management board on this mod , I've moded my heatsink already, and the battery management board can't run that high on my ally...
@@kuzuriii What exactly have you done to your heatsink? Mine is stock with custom fan curves and I never have any heat issues. Maybe it would be worth putting back to stock for the battery mod 👍🏻
Installed 4 more heat pipes ,and thermopased them to handheld diy case metal plate on the back cover , playing forza 4 on 25w custom mode temperature stays around 54C
@@hassb6348 You know the 7inch screen is my only gripe with it now. They could have made it bigger without making the ally bigger. An 8 inch would be perfect! They had the opportunity with the x aswel 🙄
@@62500Kira The original is 40wh but mine had a capacity of 35wh, I tested this on a full charge. The new battery was 67.3 on a full charge so almost double the capacity in my case 👍🏻
@@LawrenceMcIntoshElite Unfortunately no the board is too long to fit that way. It is possible to trim some of the board away at the bottom and move it lower so the top screw goes back in but it's a lot more work just for that screw
BEAUTIFUL JOB is there any possibility that Asus could do something via software to prevent this kind of mods to happen? Because is pretty useful for ally users
@@6CauseO6FDeath6 There is a possibility but I don't think they ever will. I'm sure Asus is aware of the battery mods happening in and if allys were setting on fire all over the world because of people messing around with them they would most likely do something about it! And I'd hope so too 🤭
@@ksrnate tried it but charges to 7 percent for 20 minutes and does not seem to go beyond that. The test for the battery is 10 volts not zero. Probably i fuck something up
@@ksrnate how'd I go about ordering one? Just DM on here? I also did the 2280 right angle SSD adapter but it looks like that will go over the board in the middle. I'll just kapton tape the back so I don't get shorts!
@@andy4shurr It should go under the PCB of the battery, I've tried the 2280 vertically like the original 2280 mod and that works so it definitely can be done. You can email me natedog400@gmail.com
@@wirrexx Sorry I'm not really planning on making another and if I do it will only be a similar one to this as the mod has changed a bit since then plus installation is now a bit easier 👍🏻
Hi, great mod, i already made the 90wh mod but the weight is ..... I want to ask whats the weight of this battery compared to original (real measure without blacks sticks and plastics etc), best regards and great job
@@Fraggelillo666 Thanks buddy 👍🏻 mine weighs 670g exactly 👍🏻 I don't even notice it. Obviously felt a little heavier but really quite surprised how light it still is. Stock ally is 608g and the X is 678g I should call mine the Ally S 🤭
@@ksrnate hehehe, Ally S, oh greate i think is my next mod, the 90wh battery mod i already made rise the ally to 870g and bigger in size. Thanks so much for your work
@@Fraggelillo666 Can I ask where you are? Some who have already ordered the battery from the US from a different supplier has ended up with cells that are too big to fit in Ally so for now my link is the only one we can trust until someone finds other suitable batteries
@@ksrnate Im from spain, ahhhh ok i take note about what you say, important to know it, maybe i can measure every cell dimension before "unstick" it and check if its valid or return the item and provide here if another amazon supplier fits too
@@Fraggelillo666 Yep a few people are doing this also with Amazon. I find out tomorrow if any that have been ordered are the right size. The trouble is the width can not be more than 45mm. Mine is 45mm and is a perfect fit, someone else had a 48mm and didn't fit. You could maybe peel the wrapping back a bit just to measure then stick it back down to return it 🤔
@@riptornsideways Yes indeed you can unsolder it completely and cut some of the board away at the bottom then move it down by about 5mm which is enough to get the screw back in. I did it for someone but it's way more work and me personally I don't think its worth the extra time it takes. It's still too long to mount horizontal too
@@Shahmeem994 It's not unfortunately. It's also too long to mount horizontally. I am going to try something, the original 2280 mod was to put the ssd vertical and under the original battery so I may try that because I get asked this a lot 👍🏻
@@supremeasura3358 Hi mate! Where abouts in the UK are you? It's £80 for a battery, I can either post it to you or you come and collect it. Some people have posted their Ally to me for me to fit then post back but that's too expensive imo 👍🏻
@@supremeasura3358 Yes mate already modified plug and play! Just a couple bits of plastic to remove it's really easy. Drop me an email if you want one 👍🏻 natedog400@gmail.com
@@mickeymouze5 I did actually buy the ally x one but while I was waiting for it to arrive I did this mod. Then when it came I returned it straight away 🤭 it's not worth £800 now my ally lasts 2 hours
@@jmantaiwan No that won't work unfortunately. Before you could get the adapter there was a mod where you could mount the SSD vertically under the battery, that might still work but I haven't tried it
@@ajayprasadcelestial No mate. Tested thoroughly and no heat issues whatsoever. It doesn't sit directly on top of the processor infact there's enough room to mount a 2280 horizontally. I've been using my first modded battery now for over 6 months 👍🏻
@@BarelyAverageDude I actually pre ordered the ally x and while I was waiting for it I decided to do this mod! I was so happy with it that when the ally x turned up i took it straight back to Currys 🤣 I mean obviously id rather have the X but it's not worth spending £800 just to get better battery and a extra 5fps. I'm very happy with my ally now 😊
Well I was a skin head when I was a kid 😂 not like a racist one just literally had a shaved head and for some stupid reason got it tattooed on ma fingers 🫤 long long time ago. I've got loads i would get rid of all of them now if I could 👍🏻
I see in the video I didn't explain very well, the battery tabs are made of aluminium and do need a special solder but they are welded to tabs on the board, we can solder to the tabs no problem as we are removing the tabs 👍🏻
@@joshuanahlous1143 Ok but you need to measure the cells, if over 43mm they won't fit. This is the problem people are having from different suppliers. Let me know
@@danielhw1 I hate to say it but it's probably not going to work, first thing you need to do is measure the height of the cells to see if they will physically fit. Should be about 43mm. Test the wires also for voltage
@@ksrnate worse bro I tried to do it now it doesn't turn on just with the battery just with the charger and with the battery off I can only turn on the battery with it on and it seems like it doesn't charge it doesn't show when it's discharged
@@arrtaas There's possibly a 72wh mod coming that will be much more available to people. Same as this fits inside the stock back plate so if you hold on a couple weeks 🤞🏻
@@3eumesmo I know mate lots of people have said this. There are none available from my link anymore and batteries from different suppliers are very hit and miss. What country are you in?
The linked eBay product is out of stock. So I bought 2 different C41N1904 products. However, the width of the cell is larger, so it does not fit into the logally.
Me personally I'm getting almost double, the stock ally battery although is 40wh was actually 34wh in my case. You can do a battery report in windows to check on its degradation and full charge capacity. Mine went from 34wh to a full 67.3wh. A huge difference! A lad that came here for me to fit one in his ally was same story his was 35wh
Interesting! I've already tried a 76wh C41N1837 but the cells were way too big. The PCB worked perfectly tho showing correct percentage. I'll look into this one you mentioned 👍🏻
Question if you have a minute, please. I tested my battery at the cable like you and get an output of 15.10v I checked each individual cell and all 4 are 3.7v to 3.8v, so I guess it's losing voltage somewhere in the board itself... maybe? Does anyone see this as being a problem? Thanks in advance, and thank you for the video!
Hi mate don't worry it seems like it may have been shipped to you with less charge in it than others. Anywhere between 3.3v and 4.2v is ok. Have you measured the cells to see if they will fit? Where did you order it from?
@@ksrnate Yeah, I just thought it might be odd that the individual cells seem to be fully charged but the reading at the wires seems lower maybe. But now that I think about the math, it does add up. :) I found one on amazon with good reviews and each cell measures about 4mm thick. Going to give it a go!
@@PFSTR That's a shame dude. A few have claimed they got the battery elsewhere and completed the mod but never gave a link as to where they ordered it from? Off Amazon apparently but I don't know
Very Nice, what an improvement ! going on a limb here, would you be able to do mine for me if I send it over ? no accountability 😬, please. Would be a life saver.
@@stefanclaassen3965 Of course mate not a problem, I've posted on the group that I'll sell these for £80 but for fitting is another £10. There's only 3 batteries left until they're back in stock. Depends where you are of course 👍🏻
@@ksrnate That sounds perfect, i don't mind fitting myself if I could buy the modified battery with connector from you. I am in Hungary but I can arrange it to be sent to my friend in the Uk and I'll pick it up from him. How do I private message you ?
If you could find another laptop battery with around 67wh you could use the PCB from that also, but you would have to buy some batteries to find a PCB that would be small enough? Would be very hard to find and expensive probably 😩
Yeh that's one downside to the mod, I can't see a way to use the 2280. If you mounted it in vertically it may be able to fit under the battery but I'm not 100% on that. I might even try it because I've mounted a 2280 this way before 👍🏻
@@IbadGrammarX That's a decent about of run time to be honest! No real need to upgrade the battery which I guess is why no one has? The Ally was desperate for a battery mod!! And thanks 👍🏻
@@Brianxmdn I think it might actually be possible but I haven't tried it yet. If you remember the first 2280 mod where the SSD went in vertically and under the battery, that might still be possible
@@woowin10 Theres a chance it might not work. A lot of people have bought batteries from different suppliers and found the cells not fitting in the ally
I mean all that work for 50% improvement not worth it at least i would want double if gonna do all that work as the ally battery isn't any good from the starter.and 50% increase not gonna do much.
@@redline7496 All the ally's I've done so far have had no more than 35wh due to degradation. 35wh to 67 is a bit more than 50% if it's not worth it for you then don't waste your time 👍🏻
how about you 3d print a bigger back cover so you don't have to cut or grind nothing make one with bigger grips or something like that or you can just make it slightly taller to fit a bigger battery. if you 3D print a bigger back you can put a bigger battery and have the thing side ways so you can have bigger SSD card. bigger back cover will latterly fix all the problems.
@@atmphil1 It's not really worth it, the bits you cut don't change the thickness of the back plate they are just bits that stick out to go around the stock battery and it only takes 5 minutes to do 👍🏻 this new battery is same 10mm thickness as the stock you see 👍🏻
@@ksrnate what im saying is with bigger back cover you can have bigger battery and you can use all the screws and the pcb can go sideways so you can use bigger ssd.
@@atmphil1 Well yeh of course you can use a bigger battery with a bigger back plate but to keep it stock looking this is the way. It would be nice if we didn't have to snip any plastic at all but it's worth it. I can actually move the PCB down a bit to put the screw back in but is more work and I don't really care about that screw to be honest
@@ancaxtx647 I've actually made a 99wh battery that lasted almost 3 and a half hours but it was just for fun and too expensive for anyone else to do. Check this link... facebook.com/share/p/bzVdwDDL8Er5wdxD/
Any issue with getting the battery to show the correct charge state? I've been reading that most people doing it on Facebook are stuck at 100% or 0% charge. I'm just waiting on some wire and then I'll be finishing up mine
@@brianporter9979 No trouble for me at all? I've made 2 of these now and also a few others that worked but not suitable but showing correct percentage. Ive seen some having trouble but the batteries are being ordered from different suppliers so I can't put myself in the same situation to test it? The batteries I have just work fine. Where did you get yours from?
@@ksrnate Thanks for the reply! I ordered mine from a US eBay store 'more_battery_stores' with the listing title of 'C41N1904 Battery for Asus ZenBook 14 UM425IA UX425EA 13 BX325JA 67Wh 15.48V US'. I basically took the link you posted for the EU, found the part number and searched on my own. I'll let you know how it goes, I should have everything switched over and ready to test later today
@@ksrnate I purchased the battery from a US based eBay store called 'more_battery_stores' with the listing title being 'C41N1904 Battery for Asus ZenBook 14 UM425IA UX425EA 13 BX325JA 67Wh 15.48V US' - I basically followed your EU link and then searched for the part number. I'll update you once I get wire today and get everything finished! Mine also has the reversed PCB like a few on the facebook post so that'll be interesting
@@edwincorreajr The battery I ordered is actually a bit too big (the cells are too tall) to fit in the ally. Even though I ordered the same part number, it appears the cells can be varying sizes, which sucks.
@@ksrnate I have a tattoo myself that I have wanted covered forever. No shop would cover it because they figured my embarrassment made it worth them not making money.
I wish my hands worked enough to do this to mine if i bought the stuff i would like to pay someone to do this since asus is not doing it for us even though they absolutely could.
@@jihlnabaat6329 Well I'm actually thinking about making a few to post out to those who can't do it. The one I made in the video is hopefully going to someone in the US that's had trouble with the battery he ordered so I've 3d printed a solid case for the battery to be shipped in. I can print more you see. I just need to get a few people who would want this and then I can figure a price out depending on where you are in the world of course 👍🏻
@@ksrnateI’m a US customer ready and willing to do a bank transfer. I also commented on your Facebook post saying the same thing. I can’t order the eBay battery they don’t ship overseas
@@edwincorreajr I wouldn't order any other battery apart from my link unfortunately, it's the only one I know that works you see. I'm definitely looking into shipping to the us but I'd be prepared for higher postage 😖 as soon as I have some decent prices I'll make a new post in the group 🤘🏻
I just did mine today Amazon had one on sale for 17.99. best money I ever spent 🙌 thanks for the upload my friend 🤝
@@Pu2e3vil That's excellent! Can you share the link for the battery you got? I'd love to see your mod and run time 👍🏻
Link to battery please and thank you kindly
Link pretty please
Is this a troll post, no link still after 2 days I found one on Amazon close in price
@@edwincorreajr Be aware batteries from other suppliers might not work!!
I'm waiting for a company to make a larger battery. There's money to be made here. Why haven't a battery company fill that void already....
@@cletp758 Your absolutely right but it's been so long now I doubt it'll happen, plus the X is out now. I've mentioned in a few places I will make some more of these to post out, I've 3d printed a case for them plus the batteries will be better finished 👍🏻
@@ksrnate are those already claimed? Very interested if you're selling
We need that for the deck
@@Jay-st4qy I will have 2 more to sell sometime this week 👍🏻
I did the same! I have 2 big power banks I used to use but now they're collecting dust 😂
Saving people a fortune again nate, nice to see this insane mod on youtube.
Hardcore gamers will love this dandy double your run time mod 👍
@@mehimrc1314 Hey dude! Good to hear from you! Trust you to buzz off this mod 🤣 You know me I'm always messin with something. How are ye pal?
@@ksrnate I'm good mate ticking by as some say 👍 unbelievable mod trust you to think of it and dam right I buzz off this stuff. Screw manufacturers and their warranty crap we have the right to fix our own things.
Great video hope it catches on 👍
Awesome video bro!!! Ordered one lol. Thanks so much for this amazing mod!
@@zeelong1589 Your welcome! Hope the mod goes well for you 🤘🏻🤘🏻🤘🏻
Why haven't a company make a bigger battery and back plate for the Ally? I would buy. There's easy money there. I'm waiting...
You could probably buy the ally x battery and 3d print a chunky backplate 🤔
@@borky1987You'd have to mod the cables, as the ally x battery cable has an extra wire
Your a legend doing Gods work. 😮
Very Nice !!!! Good job !!!
@@rom-p8732 Are you going to have a go ? 👍🏻
best video i've seen of a mod. I might have to give this a go myself but with the board set up sideways
@@Delyeri Hey thanks man 👍🏻 The board won't fit sideways unfortunately it's too long. If you do try this just be aware if you get a battery from a different supplier some are coming with cells that are slightly too big to fit in the ally! What country do you live?
@@ksrnate canada, I'll do my research before I order a random battery
@@Delyeri Go on this Rog ally group and ask the question there, I know a few people around the globe have done it so they will have links to batteries that will work 👍🏻
facebook.com/groups/556912946287139/?ref=share
@@ksrnate did you have to do anything on the OS when you first installed the first Mod?
@@Delyeri No mate it's plug and play. It doesn't matter what charge the stock battery had either when you take it out, I've plugged in a lot of modded batteries into my ally now and they all work perfectly showing correct percentage and other stats like full charge watt hours everything that would show in windows battery programs is all there with the modded ones 👍🏻
Why couldn’t Asus just make a 100w battery. They have the technology. I think they deliberately made a smaller battery for the OG ally just so people would want to buy the ally X
@@NoonMight Your most probably right! The first time I saw the ally battery I really didn't understand why it was so small when there's so much room. They could have fit an even bigger battery than this in there if the PCB was mounted above it horizontally. But what do we know 🤷🏻♂️
regulation. they can but it doesn't mean they can do anything. you will never see any portable device that goes above 100w. since then max capacity that you can bring to airplane is 100w. Even if they did that they will lose some several target market because 'they can't even travel with their device'.
@@astven94 That's true! But they could fit 90wh in the ally no problem. I've already made a 99wh battery for it with not much modification to the back plate
TSA Doesn't allow batteries more than 99wh. Theoretically you can't carry on this. But original specs is 40whr so nobody knows that 😅
@@naimmuti They definitely wouldn't know 🤭
Oof metal blades and lithium cells usually don't get along, but I'm glad it worked out
Great job! Best ROG Ally battery IMO, no need to butcher the backplate.
The loss of the screw does sting a little, but it's far from an issue.
@@ezg8448 It can actually be done so the screw can be used but it's more modding! If you remove the PCB from the cells completely some of the board can be trimmed so it can be lowered enough to put the screw in. It's just more work but definitely possible
@@ezg8448 And thank you by the way 🤘🏻🤘🏻🤘🏻
Great vid ....hopefully we can get an update on this in the future
So just need to flip the wire connector and it will be ok?
Regarding that top-center screw, as u already used 4 wires to re-arrange 2 battery cells, I think we can use 8 wires to connect all cells and rotate the battery board horizontally.
It won't fit that way I measured which is a shame. You could use 8 wires and lower the board, the bottom of the board is ok to be cut down as there is no chips just plain board. That way you could use the screw but is a lot more work for just 1 screw to go back in 👍🏻
@@ksrnate That's easy as I have a mini cutting machine from a 5V motor.
Nice! Would be good to see someone do it that way. Are you in the Rog ally group I posted this in?
@@ksrnate yes. Gà Mờ
this was the best so far
@@danielhw1 Thanks I think so too 👍🏻
Can you make a vídeo on a Legion go ? Or can you say which battery would work with it ? Thank you! Awesome video!!!
First of all, thank you very much for your tutorial. I love modifications like this! I happened to have a defective Zenbok UX363JA with exactly the same battery model left over and I got to work straight away. However, I noticed that my BMS was slightly different from yours. But that wasn't the problem. The problem was the size of the cells. My cells are 47mm wide. In the Ally, however, the cells can only be a maximum of 45mm wide. So the used battery is unfortunately out of the question. What a pity! As for my battery, it is a C41N1904 15.48V with 67Wh, so it should actually be identical.
@@IBMWxM3xGTRI Hi and thank you ! Yes the different batteries from different suppliers are coming with bigger cells unfortunately we are finding this out as people do the mod, so far my link I have provided is good and there is one more link to a battery on Amazon that fits but yet to see it working. Are you in the UK?
@@ksrnate Seems so. My battery is original from Asus. It would be interesting to see which suppliers all fit into the ally. I also don't want to buy another battery that might not fit again. No, I come from Germany.
@@IBMWxM3xGTRI No of course don't buy one unless you know it'll work! Hopefully soon we'll have a few more links to use around the world
Very interesting to watch and make this mod almost easy to go for people without zny experience like me ! Good job on finding and sharing, thank ! I'm still interested to know if you kept on building some for sale (3d shell), i'm living in france.
Theres literally a 76wh battery that fits in the ROG ally with the right connector you can get on Alliexpress now, most people say it works just fine for 70$ and you just have to trim some plastic.
What is the tool needed to cut some plastic on the backplate?
And is it really necessary to cut out some plastic on the back plate?
@@Paulitzer2040 I used toenail clippers for mine, the plastic is extremely easy to cut, I have the jsaux clear back plate and had to cut plastic from the ally shell itself to fit the battery.
You really have to be careful though because theres a reason the original ally battery has the center part missing, thats where the RAM is on the board and if you cut the plastic and just put the battery in it will 100% be laying on the ram with the backplate on which is a recipe for disaster with how terrifying lithium is if it ignites.
I took two of the rubber grommets from the original battery and put them on the ally next to the board so the battery would rest on them instead of the ram.... after putting my backplate on there as a tiny bulge by doing that but with screws it was fine.
Honestly it immediately made me start playing my ally more, I tested it to calibrate the batter, charged to 100% and ran down to 5% running gta v for almost 3 hours at 19w. It is night and day from the stock battery and well worth the same amount of work it takes, i would suggest maybe looking into thermal pads to put on the ram to be on the safe side.
@@Paulitzer2040 oh yeah i forgot to mention the alliexpress battery doesn't seem to fast charge with the stock ally charger anymore, I have an anker 140w charger that charges it at 60w but not 65.
Solid man cheers for the upload. How many batteries did you strip to know this one fits. Good job
@@ahmed4tutu Only 3 plus I ripped apart the stock ally battery so its been an expensive journey for me! Plus I had to buy another battery for this video 🤘🏻
this mod would be absolutely incredible to regular Z1 ally!!
@@luisuben7812 It will 100% fit the z1 ally 🤘🏻
Yeah boy look who back on you tube lol, i could do with h bro making me some 2s batteries out of some 3s i have lol, u r a clever little 💩💩 aint ya lol great video my man
@@BIGALSCRAWLERS Hey Al 🤣 I'm not back this is just a one off! How you been pal you still bashing the shit out of that kraton 🤭 I literally don't watch RC videos anymore. Totally lost interest 😩
@ksrnate yeah still bashing when it's not broken lol, I've got really in to crawling at the min lol so I mixing the both, y is this a one off? Did some ask u to make it? U still bashing?
@@BIGALSCRAWLERS Oh dear crawling? 🤣 That's the opposite of what BigAl does! At least it'll be less time wrenching n more time crawling ! Yeh just a one time video to share this mod with Ally owners. The battery is quite a big problem so I doubt I'll be posting anything else
@@ksrnate mate crawling awesome lol
Hey, would you mind building some batteries like this? I'd sure buy one
I don't have the time, it was hard doing this a second time for this video
Well done.
Buenas depues de tiempo como te va con la bateria...algun problema...?
@@yoelmoralescondori5776 No problems at all my friend I've been using the first one I made now for over 6 months and still holds the full 67wh charge via battery report in windows 👍🏻
Perfect 🎉🎉
A bigger battery, with a new back panel that has bigger handle grips would be amazing for me
@@slick6699 Yes that would be very good!
Truly solid mod. I wish it was easier, but doable.
@@OpoSai Thanks man! It seems to be the best battery mod so far imo. I've started making them to ship out but only to the UK at the moment 👍🏻
@@ksrnateplease, ship to Brazil!
@@renanmonteiro9329 I can but postage is expensive
I wish there would be a shorter battery management board on this mod , I've moded my heatsink already, and the battery management board can't run that high on my ally...
@@kuzuriii What exactly have you done to your heatsink? Mine is stock with custom fan curves and I never have any heat issues. Maybe it would be worth putting back to stock for the battery mod 👍🏻
Installed 4 more heat pipes ,and thermopased them to handheld diy case metal plate on the back cover , playing forza 4 on 25w custom mode temperature stays around 54C
Nice dude!!!! Keep it up.
imagine an ally with 99 wh battery, 8 inch screen, hx 370. would buy it in a heartbeat even though i have an ally x
@@hassb6348 You know the 7inch screen is my only gripe with it now. They could have made it bigger without making the ally bigger. An 8 inch would be perfect! They had the opportunity with the x aswel 🙄
Hi How many hours the battery last in comparison whit stock model
For me almost double run time 👍🏻
The original battery is 40 wh so... around 67% more time depending of the usage/setup
@@62500Kira The original is 40wh but mine had a capacity of 35wh, I tested this on a full charge. The new battery was 67.3 on a full charge so almost double the capacity in my case 👍🏻
Great MOD and video! What gauge wire did you use? Thanks.
@@SykoDaddy74 30 gauge is working good, any bigger will not fit on the board you see 👍🏻
Could you remove the cells from the battery management board and wire the pads in and make the board sit horizontal?
@@LawrenceMcIntoshElite Unfortunately no the board is too long to fit that way. It is possible to trim some of the board away at the bottom and move it lower so the top screw goes back in but it's a lot more work just for that screw
Great work mate!!!
Thank you 👍🏻
what thumbstick covers do you use?
BEAUTIFUL JOB is there any possibility that Asus could do something via software to prevent this kind of mods to happen? Because is pretty useful for ally users
@@6CauseO6FDeath6 There is a possibility but I don't think they ever will. I'm sure Asus is aware of the battery mods happening in and if allys were setting on fire all over the world because of people messing around with them they would most likely do something about it! And I'd hope so too 🤭
@@ksrnate tried it but charges to 7 percent for 20 minutes and does not seem to go beyond that. The test for the battery is 10 volts not zero. Probably i fuck something up
@@boneman3268 did you test the voltage before you start?
This is fantastic! If I wanted to purchase this ready made mod for my ROG, how can I go about doing that?
@@acg4031 Hi mate I've started making these and shipping them out only to the UK at the moment 👍🏻
@@ksrnate Are they on ebay?
@@andy4shurr No mate just direct from me. They're finished nice now and shipped in a 3d printed box. All tested by me first 👍🏻
@@ksrnate how'd I go about ordering one? Just DM on here?
I also did the 2280 right angle SSD adapter but it looks like that will go over the board in the middle. I'll just kapton tape the back so I don't get shorts!
@@andy4shurr It should go under the PCB of the battery, I've tried the 2280 vertically like the original 2280 mod and that works so it definitely can be done. You can email me
natedog400@gmail.com
This is awesome! Do you have one more to sell? Thanks
@@chumlee4357 I do mate, I make them now but I only post to the UK at the moment. Where are you?
@@ksrnate shoot I’m in Canada 😁
@@chumlee4357 That's a shame 🫤
Is it possible to make a similar mod for the steam deck?
I'm sure if I had a steam deck I could think of something! They have decent battery life anyway don't they?
@@ksrnate Normally on an LCD I don't go over an hour and a half, it would be great to at least get to 3 like a switch v1
Where is the next video?
@@wirrexx Sorry I'm not really planning on making another and if I do it will only be a similar one to this as the mod has changed a bit since then plus installation is now a bit easier 👍🏻
Hi, great mod, i already made the 90wh mod but the weight is ..... I want to ask whats the weight of this battery compared to original (real measure without blacks sticks and plastics etc), best regards and great job
@@Fraggelillo666 Thanks buddy 👍🏻 mine weighs 670g exactly 👍🏻 I don't even notice it. Obviously felt a little heavier but really quite surprised how light it still is. Stock ally is 608g and the X is 678g I should call mine the Ally S 🤭
@@ksrnate hehehe, Ally S, oh greate i think is my next mod, the 90wh battery mod i already made rise the ally to 870g and bigger in size. Thanks so much for your work
@@Fraggelillo666 Can I ask where you are? Some who have already ordered the battery from the US from a different supplier has ended up with cells that are too big to fit in Ally so for now my link is the only one we can trust until someone finds other suitable batteries
@@ksrnate Im from spain, ahhhh ok i take note about what you say, important to know it, maybe i can measure every cell dimension before "unstick" it and check if its valid or return the item and provide here if another amazon supplier fits too
@@Fraggelillo666 Yep a few people are doing this also with Amazon. I find out tomorrow if any that have been ordered are the right size. The trouble is the width can not be more than 45mm. Mine is 45mm and is a perfect fit, someone else had a 48mm and didn't fit. You could maybe peel the wrapping back a bit just to measure then stick it back down to return it 🤔
If you wanted the last screw in couldn't you just unsolder the other 2 batteries like the top 2 and move the long board elsewhere?
@@riptornsideways Yes indeed you can unsolder it completely and cut some of the board away at the bottom then move it down by about 5mm which is enough to get the screw back in. I did it for someone but it's way more work and me personally I don't think its worth the extra time it takes. It's still too long to mount horizontal too
@@ksrnate understandable. I might end up doing this and cutting away at the board so it’s as clean as possible.
@@riptornsideways The only problem is the battery tabs don't line up but if you cut the tabs in half so they are thinner it can be done 👍🏻
@ thanks for the info!
Did try do all the soldering board to right/ left side ? Board on middle seems dangerous though.
It's fine I've had no heat issues. The foam pad I use raises it from the processor 👍🏻
I see , is it possible to do the pcb to the right/ left side ? Cause im using 2280ssd .
@@Shahmeem994 It's not unfortunately. It's also too long to mount horizontally. I am going to try something, the original 2280 mod was to put the ssd vertical and under the original battery so I may try that because I get asked this a lot 👍🏻
I wonder if this would work for the legion go ??
Hi, I've made my 72wh battery It should fit. How can I test it without closing the Ally ? It seams there is an open case détection...
Hi mate, I'm in the uk and will be receiving a rog ally soon, how much would you charge for this upgrade? Cheers
@@supremeasura3358 Hi mate! Where abouts in the UK are you? It's £80 for a battery, I can either post it to you or you come and collect it. Some people have posted their Ally to me for me to fit then post back but that's too expensive imo 👍🏻
@@ksrnate I'm around Central London area, If i just get the battery would it be already modified? and if not how much for that.
@@supremeasura3358 Yes mate already modified plug and play! Just a couple bits of plastic to remove it's really easy. Drop me an email if you want one 👍🏻 natedog400@gmail.com
email sent mate 😊
I i've sent an email time ago but haven't received any reply yet.
Hi awesome one 🎉
Did someone manage to get a good battery in France ? Any link ?
@@DavidBerlioz Not that I know of sorry. Only guy I know that can get them is in Vietnam
@@ksrnate I'll try the C41N1825 battery it's cheaper lol
@@DavidBerlioz Just be aware it may not work!
insane mod .now i regret i sold my rog ally....
Gutted! You could buy one back, they're very cheap used ones around now 👍🏻
Buy an Ally X if you ever wanted to it comes with an 80whr battery.
@@mickeymouze5 I did actually buy the ally x one but while I was waiting for it to arrive I did this mod. Then when it came I returned it straight away 🤭 it's not worth £800 now my ally lasts 2 hours
£800 is a bit overpriced... while you can get the Ally for around 350
@@borky1987 Ain't that the truth!
I'm guessing it won't work but just wanted to ask if you could still use a 2280 ssd with the adaptor using this mod?
@@jmantaiwan No that won't work unfortunately. Before you could get the adapter there was a mod where you could mount the SSD vertically under the battery, that might still work but I haven't tried it
BMS lying on top of the heatsink and ram is heating the battery won't make it die?
@@ajayprasadcelestial No mate. Tested thoroughly and no heat issues whatsoever. It doesn't sit directly on top of the processor infact there's enough room to mount a 2280 horizontally. I've been using my first modded battery now for over 6 months 👍🏻
@@ksrnate there are PPL saying ram temp on stock goes till 60c .. isn't that bad for the natt
@@ajayprasadcelestial The ram temperature doesn't affect the battery 👍🏻
Anything on the legion go?
Good one
Doing the Lord’s work! 🫡
Now I can sell my Ally x 😅
@@BarelyAverageDude I actually pre ordered the ally x and while I was waiting for it I decided to do this mod! I was so happy with it that when the ally x turned up i took it straight back to Currys 🤣 I mean obviously id rather have the X but it's not worth spending £800 just to get better battery and a extra 5fps. I'm very happy with my ally now 😊
Yeah definitely! DIY FTW! How much was the battery?
@@ksrnate
@@BarelyAverageDude About £30 in the UK but it depends where you are I guess. I've just realised who you are 🤭 I watch all your videos man 🤘🏻🤘🏻🤘🏻
@@ksrnateI've also watched all your videos! 🫱🏽🫲🏼 🫡
😅
Interesting finger tattoos. Can you explain them?
Well I was a skin head when I was a kid 😂 not like a racist one just literally had a shaved head and for some stupid reason got it tattooed on ma fingers 🫤 long long time ago. I've got loads i would get rid of all of them now if I could 👍🏻
💪🏽💪🏽💪🏽💪🏽
what special kind of solder do you need?
@@joshm8015 No special solder needed 👍🏻
I see in the video I didn't explain very well, the battery tabs are made of aluminium and do need a special solder but they are welded to tabs on the board, we can solder to the tabs no problem as we are removing the tabs 👍🏻
Hello ! Can I install two original batteries, will they fit in thickness?
@@ЕвгенийКашуба-щ4о No they won't fit plus you would still need a PCB. The stock PCB will not allow greater capacity
@@ksrnate Thank you!
What kind of wire do we need to extend the cable ?
@@joshuanahlous1143 I've been using 30g anything bigger won't fit on the board you see. Do you have a battery?
@@ksrnate thank you, yes! I’m in AU wasn’t much trouble to get
@@joshuanahlous1143 Ok but you need to measure the cells, if over 43mm they won't fit. This is the problem people are having from different suppliers. Let me know
@@ksrnate will do, thank you
So the battery C41N1904 does have the same connector as rog ally?
No need to cut from rog ally battery?
Thanks for sharing
That's correct! You can put the stock ally battery back in whenever you want as the cable isn't touched 👍🏻
Rename it to ROG Ally Battery Mod
Wow I didn't even notice that 🤣 Thanks 👍🏻
Is there another battery that you can do? because here in Brazil it is difficult to find this battery
Only this one fits so far. I haven't heard of any others yet
@@ksrnate Can you put the battery controller on top of it instead of in the middle?
@@ksrnate I bought the same battery but the wires already came in the position you placed if you have Telegram I will send you a photo
@@danielhw1 I hate to say it but it's probably not going to work, first thing you need to do is measure the height of the cells to see if they will physically fit. Should be about 43mm. Test the wires also for voltage
@@ksrnate worse bro I tried to do it now it doesn't turn on just with the battery just with the charger and with the battery off I can only turn on the battery with it on and it seems like it doesn't charge it doesn't show when it's discharged
How many hours of play does the battery give you, let's say about 15 to 25 tdp?
@@ronaldruizgarcia3995 I play at 18w usually I get about 2 hours 👍🏻
Hi, question: I tried the mod but the cell inside the battery I bought was a bit larger 50mm, how large is the cell you used in this video?
@@devandmagic Hi yes this is a common problem, I guess you bought the battery from somewhere else? Mine is 43mm. Where did you get yours from?
Hey, exactly like this happened to me, my battery is like 1 or 2 mm too wide to fit :(, bought from ali express.
@@arrtaas There's possibly a 72wh mod coming that will be much more available to people. Same as this fits inside the stock back plate so if you hold on a couple weeks 🤞🏻
@@ksrnate I too bought it from Aliexpress, because the eBay shop wasn't shipping to my country! I'll wait for the next mod! Keep it up man!
@@devandmagic Thanks a lot man appreciate 👍🏻
I got an Asus battery like the one in the video, but the cells are bigger and don't fit in the chassis :(
@@3eumesmo I know mate lots of people have said this. There are none available from my link anymore and batteries from different suppliers are very hit and miss. What country are you in?
@@ksrnate brazil, and it was the only one I found selling, no luck
@@3eumesmo I'm shipping abroad now, postage isn't too bad if your interested?
@@ksrnate No thanks, the problem is not the shipping, but the taxes on the product when it arrives here
@@3eumesmo I know that. There is a way around it, if I say the value is under £5 then customs won't touch it
The linked eBay product is out of stock.
So I bought 2 different C41N1904 products.
However, the width of the cell is larger, so it does not fit into the logally.
@@dc3000b Are you in the UK?
beauty
How much more runtime are you getting?
Me personally I'm getting almost double, the stock ally battery although is 40wh was actually 34wh in my case. You can do a battery report in windows to check on its degradation and full charge capacity. Mine went from 34wh to a full 67.3wh. A huge difference! A lad that came here for me to fit one in his ally was same story his was 35wh
Will this can be happen with c41n2101 too?
Interesting! I've already tried a 76wh C41N1837 but the cells were way too big. The PCB worked perfectly tho showing correct percentage. I'll look into this one you mentioned 👍🏻
@@ksrnate Waiting for news!
I made the battery mod but it doesn't charge, it stays at 1%. Should I synchronize it in some way so that it can be detected?
@@carlosmd143 where did you get the battery from?
Question if you have a minute, please. I tested my battery at the cable like you and get an output of 15.10v
I checked each individual cell and all 4 are 3.7v to 3.8v, so I guess it's losing voltage somewhere in the board itself... maybe?
Does anyone see this as being a problem? Thanks in advance, and thank you for the video!
Hi mate don't worry it seems like it may have been shipped to you with less charge in it than others. Anywhere between 3.3v and 4.2v is ok. Have you measured the cells to see if they will fit? Where did you order it from?
@@ksrnate Yeah, I just thought it might be odd that the individual cells seem to be fully charged but the reading at the wires seems lower maybe. But now that I think about the math, it does add up. :)
I found one on amazon with good reviews and each cell measures about 4mm thick. Going to give it a go!
@@PFSTR It's not the thickness that's the problem it's the height, about 43mm is our limit but some are coming 45mm or bigger
@@ksrnate ahhhh... Then I might be out of luck with these ones. They're just under 47mm H. At least I got some soldering practice. :)
@@PFSTR That's a shame dude. A few have claimed they got the battery elsewhere and completed the mod but never gave a link as to where they ordered it from? Off Amazon apparently but I don't know
Thx bro
Very Nice, what an improvement ! going on a limb here, would you be able to do mine for me if I send it over ? no accountability 😬, please. Would be a life saver.
@@stefanclaassen3965 Of course mate not a problem, I've posted on the group that I'll sell these for £80 but for fitting is another £10. There's only 3 batteries left until they're back in stock. Depends where you are of course 👍🏻
@@ksrnate That sounds perfect, i don't mind fitting myself if I could buy the modified battery with connector from you. I am in Hungary but I can arrange it to be sent to my friend in the Uk and I'll pick it up from him. How do I private message
you ?
@@stefanclaassen3965 You can get me through a Facebook group I'll see if I can put the link here hang on
@@stefanclaassen3965 facebook.com/share/p/YLQvR4XxeyEup4kB/
@@stefanclaassen3965 If you have messenger on your phone you can private message me 👍🏻
Do you sell these im based in uk
@@liamjason8446 I do mate they're finished nice and shipped in a case too 👍🏻 drop me an email if your interested natedog400@gmail.com
@@ksrnatecan you ship to US mate?
@TheMetaphorical Yes mate no problem, you can email me and we'll sort that out of you want 👍🏻 natedog400@gmail.com
Omg. Hopefully someone can make pcb board to make compatible of 2280 ssd ❤❤❤
If you could find another laptop battery with around 67wh you could use the PCB from that also, but you would have to buy some batteries to find a PCB that would be small enough? Would be very hard to find and expensive probably 😩
I have 2280 ssd 90 degree angled in my Ally can i do this mod or the ssd will be in the way? 😢
Yeh that's one downside to the mod, I can't see a way to use the 2280. If you mounted it in vertically it may be able to fit under the battery but I'm not 100% on that. I might even try it because I've mounted a 2280 this way before 👍🏻
Hi, I'm interested in this mod with 2280 SSD. The battery board could be put differently . It's just a matter of some wires.
@@DavidBerlioz Hi the 2280 can be used if you mount it vertically like the 1st 2280 mod 👍🏻
i wish steam deck have one
@@IbadGrammarX How is battery life on the steam deck?
@@ksrnate 2 hour max if i play game like triple aaa game
if i play old game resident evil 4 2005 about 3 hour
india 5-4 hour
i have lcd one
and amazing mod dude
@@IbadGrammarX That's a decent about of run time to be honest! No real need to upgrade the battery which I guess is why no one has? The Ally was desperate for a battery mod!! And thanks 👍🏻
@@IbadGrammarX India 😂😂😂
Where is the group? Can someone post a link please?
facebook.com/groups/556912946287139/?ref=share
This is my post, I'm James in the group but that's not my real name 🤭 I just didn't want a Facebook account
facebook.com/share/p/WuJv9p29LPzp5pMW/
Won't let me open group. What's the group called please?
@@gazcropperlaa ASUS ROG Ally and Ally X Community
Does it fit with original ally backplate?
@@1990kisame Yes mate but you will still have to snip some plastic away like I did with the diy plate
Is this mod doable if I got a 2280 ssd horizontally installed?
@@rivaiiasan Not horizontal it won't but do you remember the first 2280 mod where you mont it vertical under the battery, that works 👍🏻
I am able to use it horizontally with the other 72wh batt how
@@ajayprasadcelestial which 72wh battery?
ROG ALLY got ghettofied.
I want this with the 2280 mod 😢
@@Brianxmdn I think it might actually be possible but I haven't tried it yet. If you remember the first 2280 mod where the SSD went in vertically and under the battery, that might still be possible
@@ksrnate someone else can give it a try?
@@Brianxmdn I can try it, a few people want to do this and use the 2280. I'll try maybe tomorrow
@@ksrnate I'll be waiting. Thanks anyway. Hope everything works.
Hey, any update?
I find 72Wh battery in aliexpress
@@woowin10 Theres a chance it might not work. A lot of people have bought batteries from different suppliers and found the cells not fitting in the ally
@@ksrnate I had used it, it's great
I mean all that work for 50% improvement not worth it at least i would want double if gonna do all that work as the ally battery isn't any good from the starter.and 50% increase not gonna do much.
@@redline7496 All the ally's I've done so far have had no more than 35wh due to degradation. 35wh to 67 is a bit more than 50% if it's not worth it for you then don't waste your time 👍🏻
how about you 3d print a bigger back cover so you don't have to cut or grind nothing make one with bigger grips or something like that or you can just make it slightly taller to fit a bigger battery.
if you 3D print a bigger back you can put a bigger battery and have the thing side ways so you can have bigger SSD card.
bigger back cover will latterly fix all the problems.
@@atmphil1 It's not really worth it, the bits you cut don't change the thickness of the back plate they are just bits that stick out to go around the stock battery and it only takes 5 minutes to do 👍🏻 this new battery is same 10mm thickness as the stock you see 👍🏻
@@ksrnate what im saying is with bigger back cover you can have bigger battery and you can use all the screws and the pcb can go sideways so you can use bigger ssd.
@@atmphil1 Well yeh of course you can use a bigger battery with a bigger back plate but to keep it stock looking this is the way. It would be nice if we didn't have to snip any plastic at all but it's worth it. I can actually move the PCB down a bit to put the screw back in but is more work and I don't really care about that screw to be honest
next 90wh or maybe can 100wh
@@ancaxtx647 I've actually made a 99wh battery that lasted almost 3 and a half hours but it was just for fun and too expensive for anyone else to do. Check this link... facebook.com/share/p/bzVdwDDL8Er5wdxD/
Any issue with getting the battery to show the correct charge state? I've been reading that most people doing it on Facebook are stuck at 100% or 0% charge. I'm just waiting on some wire and then I'll be finishing up mine
@@brianporter9979 No trouble for me at all? I've made 2 of these now and also a few others that worked but not suitable but showing correct percentage. Ive seen some having trouble but the batteries are being ordered from different suppliers so I can't put myself in the same situation to test it? The batteries I have just work fine. Where did you get yours from?
@@ksrnate Thanks for the reply! I ordered mine from a US eBay store 'more_battery_stores' with the listing title of 'C41N1904 Battery for Asus ZenBook 14 UM425IA UX425EA 13 BX325JA 67Wh 15.48V US'. I basically took the link you posted for the EU, found the part number and searched on my own. I'll let you know how it goes, I should have everything switched over and ready to test later today
@@ksrnate I purchased the battery from a US based eBay store called 'more_battery_stores' with the listing title being 'C41N1904 Battery for Asus ZenBook 14 UM425IA UX425EA 13 BX325JA 67Wh 15.48V US' - I basically followed your EU link and then searched for the part number. I'll update you once I get wire today and get everything finished! Mine also has the reversed PCB like a few on the facebook post so that'll be interesting
Following this closely thanks and please do report back
@@edwincorreajr The battery I ordered is actually a bit too big (the cells are too tall) to fit in the ally. Even though I ordered the same part number, it appears the cells can be varying sizes, which sucks.
jesus you are sold out
Skin head
@@junkheadINC Yeh not for a long time though 😑
@ksrnate good move. We all grow up and become wiser.
@@junkheadINC Indeed. Only some mistakes can't be easily erased 😭
@@ksrnate I have a tattoo myself that I have wanted covered forever. No shop would cover it because they figured my embarrassment made it worth them not making money.
I wish my hands worked enough to do this to mine if i bought the stuff i would like to pay someone to do this since asus is not doing it for us even though they absolutely could.
@@jihlnabaat6329 Well I'm actually thinking about making a few to post out to those who can't do it. The one I made in the video is hopefully going to someone in the US that's had trouble with the battery he ordered so I've 3d printed a solid case for the battery to be shipped in. I can print more you see. I just need to get a few people who would want this and then I can figure a price out depending on where you are in the world of course 👍🏻
@@ksrnateI’m a US customer ready and willing to do a bank transfer. I also commented on your Facebook post saying the same thing. I can’t order the eBay battery they don’t ship overseas
@@edwincorreajr I wouldn't order any other battery apart from my link unfortunately, it's the only one I know that works you see. I'm definitely looking into shipping to the us but I'd be prepared for higher postage 😖 as soon as I have some decent prices I'll make a new post in the group 🤘🏻
🇨🇦