PS3PHAT 60GB CECHC02 How to remove a disc manually & reset the Blu Ray Drive by gc repairs com
Вставка
- Опубліковано 24 сер 2024
- How to manually remove a game disc from Playstation 3 & Reset the Blu-Ray Drive
Brief Introduction:-
=====================
If your Playstation 3 (PHAT) does not turn on or have some sort of motherboard issues and you would like to remove the game disc only? In this video we'll walk through the steps to take out the disc and reset the blu-ray drive gear and assembly.
Compatibility:-
=====================
Playstation 3 (PHAT) - 60GB - CECHCxx Models Only
Pre-requisites
============
- Access Pro Toolkit v3 (Purchase Link Here)
www.gc-repairs....
Website:
www.gc-repairs.com
Book in for Foreign Objects Removal Service (Link Below):-
www.gc-repairs....
Facebook Page:
/ 118311931607896
Twitter:
#!...
Skype: gcengineering
MSN: gcengineering@hotmail.com - Ігри
2019 and you my friend just saved my ps3! Thank you!
Me to 2020.👍
@@LEXxTALIONS7913 me 3 2021
Thank You so much for the step by step instruction! I finally was able to get my disk out and put my ps3 back as it was! Now I know how to do it by myself
Thanks for the video Master!!.... my old PS3 is coming back from the dead...it will be a gift for my 8 years daughter.😁
Thank you. This have allowed me to keep my 6 yr old son happy, and my 8 yr old PS3 even happier.
Thanks for the help! Turns out, there were four discs stuck in it. I don't even want to know how the previous owners managed to do that
Great video. Followed your instructions to identify my problem & reset the drive mechanism.....couldn't have done it without the video. Many thanks.
Thank you, just did a major YLOD repair and a disk was stuck inside, I didn't know how to reset eject mechanism. Now I do :) Keep up the good work.
This video really helped. Although I have the ceche01 version, they made it a little bit easier as there was no screw to detach the arm piece, no ribbon cable, no stickers either. But I did have to remove the inner metallic piece first before being able to take the white cog off otherwise I think I would've broke it pulling it out. but other than that all the steps were practically the same.
But you saved my Rocky & Bullwinkle disc!! I haven't been able to continue binging my series box set for months, so THANK YOU!
brilliant vid. . when you take that cog off, push it back and forward few times and make sure the 2 grey disc stoppers(where the disc goes in at front) both popp up same time then back down to the flat position then make sure it's locked in place and put the cog back on :)
Thanks, Took apart blu-ray drive with a disc in it, put it back together and drive would not let a disc be inserted. Took apart and found that two clips where preventing disc from being loaded. Used your process above to reset drive and move the two clips back in place. Works fine now.
🙏 THANK YOU. Bought a backwards compatible ps3 for really cheap on ebay and the guy thought the disc drive was destroyed. Turns out there was just a disc and a GUITAR PICK wedged in there hahah. This vid helped me immensely resetting the off track mechanics though! Cheers
I finally got my MW3 OUT YES THANK YOU SO MUCH
it's been 3 years!!
same lol
Thank you! Removing and re-seating that one white gear was the solution, none of the other videos suggested that.
Thank you so much for this video!! I probably would have ended up breaking my console if I had not found this.
thank you man, saved a copy of skyrim for a friend
I'm here watching your video in 2024...Thank you!
awesome. glad you got it working
@@GameConsoleRepairs You video saved me several hours of frustration.😃
Excellent video very high quality and easy to follow. No follow me bullshit at the beginning just straight to the point. Thank you
Thank you very much for the guide! I was able to reset my drive, after I disassembled it to extract a jammed disk. I found the video easy to follow and your voice calming and clear. My drive works perfectly now. Thank you! :D
Thank you! Was able to save my old Ps3 with your instructions
Ty Other videos had me trying to line top cover pins to the inner side rails first few tries I was under the impression that had to leave lase tooth of gear on the side rail nope simply easy step by step and bingo it works
Ty
Thanks for posting, already fixed the YLOD but needed to reset the disc after game disc removal. Worked great afterwards !!
Many thanks, just bought another YLOD 60gb, when i re-flowed, started 1st time but disc retrieval had occured and the drive was all jammed, i did not know how the reset so thank you very much, worked 1st time :D :-)
Thank you the mechanism was off track now it’s fixed
thanks man this help me a lot. from 6.03 i was killing my self trying to solve the problem till i saw your video. and new what was going on.
omg thank you so much for making this video.. i literally can not thank you enough
So simple easy and saving money
Totally works, you are the man my man! Now i can watch Antman..
huge thank you! this helped a lot i finally have my game that i really loved playing but never could get back out again since my ps3 phat model kept over heating and couldn't eject the disc out itself!
dude you area beast ... helped me fix 4 friends disk drive problems CHEERS and +1'd
thank you very much, you just made me save the money for a new blu ray drive... thank you...
Thank you so much. 2020 👍 I fixed my ps3.
directions to hard and complicated .. broke old PS3 but got my GTA 5 game out thank you and liked
Thanks for the walk through, it worked well. 👍👍
you can just unscrew and lift up the silver motor instead of that white gear and this will still work with 2 less steps required : D
Very very good video, for me too i'm not english langage. Thank you
@ruinsbelief
check the power cable. did you break any small pins ?
Thank you so much! You save my bluray drive!
very good vid. simply taking those cogs out helped! Whereas i was manually moving cogs round...
I bought a PS3 for £5 a while back. I tried inserting a disc but it wouldn't go in, I shake the PS3 and spaghetti and half a copy of modern warfare comes out. Also the small 80gb HDD was filled to the brim with p*rn. Still can't insert a disc, so I'll try this.
I bought a PS3 for £5 at a carboot sale thinking it wouldn't work and I could use it for spares but it did work, although only if I kept it upside down. Eventually it stopped reading the disc. I opened up the drive and inside was the disc part of a PSP game, which had been in there. Fifa 08.. Amazing that it worked for so long with something jammed in.
broke my disk drive lol but still a great video its just im really bad when it comes to consoles
Good video, what was causing the disk to be stuck for me was a mini sd card. A child must have put it into the disk drive.
damn dirty little kids lol
kyle monroe Yeah I know. The analogs on the remote which came with the console were also filthy. Only reason I bought the console was because it was running firmware from 2009.
Ok I need your help. turned out ps2 games only work on my PS3. Now no discs will be read. it sucks them in but no blue light is on. I then opened the drive up and the disc was not fully in. it wasnt even in the circle bit so it could spin. how do i fix this?
absolutely perfect.great video! Thanks for getting to the point and showing detailed on how to do this step by step from the beginning to end.
You are a god among men my friend!!!
Was this your first time disassembling the drive? because the 3 tiny black screws were hell to get out.
Thank you so much for helping me with this!
Thank you :) 🙏 you just saved my ff7 disc 👍🤩
Spidyeet no my ps3 went powerless so i had to do this to save my disc. But then the parts split and now my discdrive just spin around. But i got the disc. I don’t know in your case :( this was the first time I opened something so :(
good video thanks for the upload
Those red black ribbon snapped of is dat the curse of the Reading sign not coming on display?
Im assuming you need the sensor cable? I was wondering why my ps3 doesnt take discs. I didnt know if it was the gears messed up or the sensore cable being broken
I have PS3 CECHC02 but it's missing disc drive. Which model do i need to buy? Can't find it anywhere :/
Hi, I followed your vid but for some reason after inserting the disk, it got stuck again. Any advice?
Thank you! 😊
Very helpful, thanks.
Hi I was able to reset as you instructed but now the drive takes the disc but doesnt fully pull it in, it gets like 90% of the way in and I can hear it trying to seat it on the spindle but never does. It ejects it fine after though...
Thanks man
Thank you
Thanks, this helped a lot!
Yayyy!! It worked! THANK YOU!!!
The motor that takes in the disk doesn't even pull the disk in for me and I don't have a disk in the drive, and the gears are all reset, any ideas?
i have the same issue, you ever figure it out?
my discs won't go into it now thanks a lot I'm going to game stop and have them do it
thank you
Hey question! Where does the spring on the eject Feeder correctly position itself ((that back piece with both plastic arches a 8:21))
Also where can I buy the part for the blu ray only?? If I change that will I lose the previous stored data?
Thanks man👏🏿👏🏿👏🏿😁
After following your tutorial, I could get the disk out, but immediately it does the same thing. Disc goes in but won't eject. It tries but can and just gives up. I'm not sure what's really wrong with the mechanism. Any ideas would be helpful
Mines goes in and out but is not reading no disc .? What do you think is the problem ?.
Thank you! It works.
I followed all of your steps and I'm still getting a knocking sound I cannot insert a disc all I hear is knocking. Do you know what I'm doing wrong?
Thank you for your time crack
Awesome Great Thanks! Helps alot~
muy bueno el video gracias por compartir
It worked thank you
i wanna to tnks u man soo much!!!!! you are the best tks u thks uuu!!!!! ;)
yes what is the issue ?
Ps3 backwards compatible doesnt play ps3 games only ps2 games. Help!
@4.40 what is the sensor cable and what does it do? How important is it if you don't connect it back?
I bought a refurbished disc drive. Traded out the board from original drive. Then after install now it doesn't respond at all to anything. Beforehand the original one stopped accepting discs and reading them since kids put 5 discs in at the same time. The new one doesn't even eject or respond. The system starts normally without codes, but whenever I try to click on anything even PlayStation store it just goes to black screen. Any advice?
Nice!
I am having serious problems w my fat ps3 I believe it is first generation. The eject mechanism snapped and I can’t get it to stay powered on but my biggest problem is how do I save the stored game data or transfer it to another ps3? Is this possible to do?
how important was the sensor cable, tried everything i had to be careful and stgill ripped both cords out.
Me too. I even tried to use fine tweazers. Broke the cable clean off. If the sensor is important, I now have just a glorified paper weight. Or is there a way to fix it?
@@StarlasAiko That system ended up breaking unfortunately. Pretty cool to get a response after half a decade.
Tha_Kid_Shido well, I had to resort to buying a new drive on ebay
very handy cheers
why do you have to dismantle all of it? you got disk then put it back together it again
right?
i have a question during this process there were 3 gears that fell out and i dont know where they belong in the disc drive, can you please help me
I have a CECHK01 (FAT) model and the disc does not spin anymore, would resetting the drive be a reasonable option? I tried re-seating the drive but it didn't work.
Hi there, so, I'm working on this now, but I have a couple of problems. One,I did as you said, and slid the slider bak to where it isn't locked in position, but the motor just revs, and wont accept the disk, it seems as if the slider isnt being pushed into the gears. Why isn't it? Second, if I put it in to the gears myself it tweaks about and makes a horrible grinding noise. Any ideas?
Excellent. You demonstration is so easy and I was able get my disc out. Need a bit more help as my PS3 60gb still showing red blinking light. when I touch the power button then the fan starts for few seconds, then the light turns red, make few beeps and stop. do you have the solution. thanks
The problem could be related to poor contacts on the Hard Drive. Remove HD, rub lightly with an eraser then reinsert & move back & forth a few times to maybe obtain better contact. This worked for me.
Thaank you
What if your disk isn't loading while its in the ps3
So I was able to get my disc and re set the motor, but it still wont take any discs in (so the games wont read because it still thinks the drive is empty). Any solutions?
do you have any eject feed arm pulley for sale?
hi there , can you also show how to repair the red or yellow light in 60 gb ps3 ? i tried alot of things but still the same .
have you fixed it yet? if not you should search up "ps3 reflow"
it's reflowing your mother board to fix the rlod/ylod. just did mine and it works.
when you add the "metal piece" at the very end you really dont make it clear as to how you place it. so i had to guess work that bit
2020👍
7:42 HELP THE GEARS FELL APART AND I CAN'T REASSEMBLE IT
I bought one that doesn't read disks I'm hoping this is what is wrong with it
I have a ceche01 and I got it for 110
Hey can u help me with my ps3 phat 60gb
My ps3 fell from a height of about 70cm. Then the disc spinner didn't spin the disc at all so I replaced the deck. Now the problem is that when it starts spinning I hear a sqweezing noise, like the disk doesn't stand steady and it tangents on something but everything inside the drive seems to be ok. Any people with the same roblems or solution?
For some reasons the discs aren't getting loaded in after I put it back together, please help
have you found a fix?
@@Heza yea, here's a really good video ua-cam.com/video/1FVBvD0RVvo/v-deo.html fixed my problem so hope it fixes yours too
@@SkywareEntertainments thanks man I'll try this out and let you know if it worked
@@Heza kay
Thanks... :)
Me funcionó y eso que no le entendía a lo que decia