Hey quick question..I have a d16z6 css block with a d16z6 built head..I'm trying to make 500hp or close to that with a 9:1 or higher compression. What piston should I go with? The pm6 or the nippon racing vitara piston
Use the zeal calculator. Your pistons will stick out the block (vhb said it’s taller and based off the compression he said it gives the pistons height should be about 30mm). You’ll probably need a thicker head gasket
Might be worth noting for those who are using the ZealAutoworks.com calculator. From what I have gathered... Nippon racing uses a -11 dome one their “old” vitara piston. If you click "Vitara" in the calculator you'll notice it defaults to -15 dome. Which I believe is what YCP uses on their version.
If the no notch are also longer than normal then I’m gonna say no just to be on the safe side. Ima post the pic to IG shortly to show how much taller these are
help, who can tell me the clerence and ptw given by nippon racing for these pistons? uyunira the ebay reseller did not give me any measurements for my machinist nor the sheet with the pistons, thank you from France
Pistons are $180 & worldwide shipping available
Hey quick question..I have a d16z6 css block with a d16z6 built head..I'm trying to make 500hp or close to that with a 9:1 or higher compression. What piston should I go with? The pm6 or the nippon racing vitara piston
Hi I just bought the same in France,
what PTW would you recommend for 20PSi boost on E85,
for 350hp? THANKS
Do u still have stock this piston
Big shout out to Chris. Asked him a product related question and had an answer within 30 seconds. Great guy to do business with!
What’s the compression when we use speed factory no notch long rods with these pistons ?
Use the zeal calculator. Your pistons will stick out the block (vhb said it’s taller and based off the compression he said it gives the pistons height should be about 30mm). You’ll probably need a thicker head gasket
Might be worth noting for those who are using the ZealAutoworks.com calculator. From what I have gathered... Nippon racing uses a -11 dome one their “old” vitara piston.
If you click "Vitara" in the calculator you'll notice it defaults to -15 dome. Which I believe is what YCP uses on their version.
ther's new Nippon racin Vitara V2 with 0.0030" comp and -12cc dome , with 75.50mm i see that
Does anyone know the Comp Height and Dome cc for these? Zeal Works keeps saying 7.68:1...
If they could work with the no notch long rod I need a set
Looks like speed factory needs to make no notch standard length rods for these now. Otherwise they might fall behind on this corner of the market.
Hey chris, did nippon also correct the barrel diameter for the d16 75mm bore when they redesigned these for the higher comp height?
Good info man 👍 much needed
sk2 long rods and these pistons with a thicker headgasket ?????
Comp tested my b16b striker today and came up over 300psi across the board. You ever seen numbers like that
Hello, anyone have the measurements for the compression height on this one?
can you use them pistons if you already have no notch long rods
If the no notch are also longer than normal then I’m gonna say no just to be on the safe side. Ima post the pic to IG shortly to show how much taller these are
How many mm is the new piston taller compared to the old one?
where can I get those really want give them a try
Hit the DM's on Instagram
D or k for first build qu
help, who can tell me the clerence and ptw given by nippon racing for these pistons?
uyunira the ebay reseller did not give me any measurements for my machinist nor the sheet with the pistons, thank you from France
Can you run then on speedfactory long rods?
Ok i see that wont work.
@@kendrickaugustine4240 it will work you just need a thicker head gasket.
Finally!
Will these work well with SpeedFactory *No-Notch* Rods..??
Don't believe they will
What cr if use y8 head
Does anyone know the Comp Height and Dome cc for these?
are these available online yet?
Listed on the website. Pm me directly for best price
need a y8 head and s40 trans?
So you are using Suzuki Vitara pistons in a Honda engine?
Yes, this was discovered by the Puerto Ricans near the turn of the century. The ycp version has gone mid 9's in a D.
How much for a b18b1 short block
Gotta be more specific than that
What's your direct contact email. I'd like to order a 76.0mm set and have posted to Australia. Thanks mate :)