Refrigerator Repair - Replacing the Temperature Sensor (GE Part # WR55X10025)
Вставка
- Опубліковано 22 сер 2024
- www.partselect.... Click here for more information on this part, installation instructions and more.
This particular Temperature Sensor is specific to GE manufactured brands including General Electric, Hotpoint, and Kenmore. To find a temperature sensor specific to your model, visit www.PartSelect.com.
If your refrigerator is having any of these symptoms, then replacing the temperature sensor could solve your appliance problem.
1) Fridge and/or freezer section are too warm
2) Freezer won't defrost
3) Fridge and/or freezer section are too cold
3) Refrigerator runs too long
PartSelect Part Number: PS304103
GE Part Number: WR55X10025
Tools used for this repair/replacement:
1) ¼ inch Nut Driver
2) Wire crimper and strippers
3) Wire Splice Connectors
Get model-specific repair help from PartSelect.com. Learn how to troubleshoot, diagnose and repair your appliance with user-generated installation instructions, hundreds of step-by-step repair videos, and our Instant Repairman. If you've got an appliance problem, we can help www.partselect....
Great how-to video but one important detail is missing: What symptom lead to the need to replace the temperature sensors? What are some of the common symptoms one would experience when each of those three sensors have failed?
Thanks very much! The GE tech who came to my house and told me the thermistor was bad wanted me to pay over $300 to do what this video teaches and that I followed successfully with the thermistor I ordered online. Very much appreciated!
T Suisei Always happy to hear we saved someone money! Especially around the holidays!
Steve, I just watched your videos to change the Temp Sensor & Thermostat of our GE refrigerator. I was able to buy the parts & install myself, saving my family over $300 in labor. Thank you is NOT enough!!!! :)
Tina G That's a great savings! Any plans for the extra cash?
Thanks so much for the help! This video is so thorough that even someone like me who has never owned a pair of trimmers and crimpers or even touched electrical work was able to perform the fix. My only issue seems to be that right after the fix, my freezer started to get cold again, but shortly after it went into defrost mode for a while and got much warmer. I'm hoping that it did that to melt the large accumulation of frost on the coils, because I could see a lot of water drainage at the bottom. of the back plate. It's back on cooling mode, so I hope the warm freezer problem has resolved. I guess I'll find out tomorrow if I have ice. Let me know if you think this may be a sign of a different issue and was never the temp sensor. Thank you for your help!
Hi Dusty,
Thanks for your question.
You could be right - It sounds like your refrigerator is getting "stuck" in defrost mode. It could be your defrost thermistor, as that is what tells the refrigerator when to start cooling again. If that's not operating correctly, the defrost cycle will last too long and cause things to thaw and refreeze, like you're experiencing.
Hope that helps!
Thank you so much for your video, I was able to execute the necessary repair to my refrigerator within 30 minutes, following your step by step method video. Interestingly enough, 5 previous attempts by certified repair technicians from a large department store never even came close to discerning the problem and concluded that my 9 year old Profile refrigerator needed to be replaced.
Oh that'd be great! It is a Hotpoint HSM25GFTA double door. I already have changed the Thermostat and the resistance (which was burned out) and it still freezes with ice all over so I'm thinking the sensor or the main board will go next...
Thanks for your great videos, it makes me feel like a Pro!
Thanks for your reply. I discovered one other symptom. The temp adjustment knob for the fridge side works as it should, but the knob for the freezer works only for the off (0) selection and in all other positions (1-9) the compressor seems to run non stop. Needles to say, it's very cold in the freezer side.
outscoutadventure I would still suspect the temperature sensors or the main control board.
@outscoutadventure where you able to fix it? I have the same issue
there is a special place in heaven for you sir, thank you!!!
Hi, Mike. Sorry to hear about this issue with your refrigerator, and thanks for your question.
Do you see any frost around your evaporator coils, or ice-build up inside your freezer? If so, in combination with your freezer defrosting, it could indicate a problem with your defrost thermostat.
Having said that, with the control panel on your freezer display not working, both problems could indicate an issue with the control board. If your coils aren't iced over, this would be my best suggestion.
Hi there,
Thanks for your question. The thermistor in your model is located near the ice maker. If you go to our website, PartSelect [dot] com and type in part # PS1765215, you'll see the diagram where the thermistor is located. If you click to enlarge it, it's number 22 in the diagram. I hope that helps!
Yes, you can test the thermistors using a multimeter before replacing them. If you need some guidance on how to do this, feel free to let me know and I'd be happy to help!
Hi there. Thanks for your question here. That's correct - about 16.3K ohms is what your thermistor should read, after having been submerged into a glass full of ice water with the sensor reading very close to 32°F.
A reading that far off, at 26K ohms, would indicate that the thermistor needs to be replaced. If you can supply your model number, I'd be happy to let you know the part number required for your model.
I hope this helps! Cheers.
Just replaced the thermostat and the thermostat sensor with your videos. Thank you for the great info and help! Hopefully that was my issue, lol.
I would have a look at the defrost drain. Inside the freezer there is a cooling coil that collects frost and then automatically defrosts several times a day. The water collects in a tray and then funnels into a hose and then to the outside of the refrigerator to the bottom where there is a tray that evaporates the water. If this drain is clogged then it can cause moisture build up affecting the inside temperature of your fridge.
I think it would be better at the beginning to inform about this part and what are the symptoms when it goes bad. Still a good job, well done, and thanks for sharing.
Sir, thanks SO much, this is going to save me a lot of dough!
Greetings and much appreciation from Lima, Perú :)
Replacing the temperature sensor could solve the problem you're having. Have you tried adjusting the temperature inside the fridge? That can help with making sure the temperature is correct and your milk won't freeze.
Can I use that refrigerator sensor for a window thermometer that has the same small sensor that broke off thanks
Hello and good day Steve. Ok i have a ge side by side about five years old. I have replaced the thermistor and defrost thermastat. I have the condenser fan on order because you taught me if the middle trim is hot, and it was, to order one... I have a fan blowing on the back of the fridge to keep it cool. NOWWW. the temp in the freezer is getting really cold, and not stopping from going lower and lower. now it is negative 10 and going lower. What is wrong???? Thanks so much. Tom
Hi there,
Thanks for your question! It looks like there are four thermistors (temperature sensors) in your model.
I hope that helps!
In my opinion a sensor that goes bad should have a built-in plug!
It's showing 44F now in the fresh food section while set to 34F. It's operating range now 40-45F, while it used to be 32-35. The food gets spoiler quicker, there is moisture building up on the walls, and sometimes a small puddle on the button below the produce bin.
Thank you very much! I replaced the three sensors, the defrosting resistance (was open) and my fridge is up and running again! Was very helpful your teaching. You are a professional.. Why I replaced all the 3 thermistors? Because if one is bad, the others maybe would be near to get bad too. Thanks..
no, not the evaporator cover. It's a small oval 3"x2" plastic shield that covers the what looks like thermistor. It sits right in the middle of the wall dividing the fresh food and freezer sections, on fresh food side. I was going to try replacing the thermistor to see if my temperature issue goes away, but I can't figure out how to take it out.
The Sensor is located inside of the Refrigerator, not the Freezer on "some models" (PSS26MGPABB). Took me an hour to find mine was not in the Freezer!
Hi Ben, thanks for the clarification on your problem. Is the cover you're trying to remove the evaporator cover? If so, there should be four screws holding it in place. Once these are removed, you can bend the evaporator cover gently, in order to displace the tabs at the top of the cover, and clear the light bulb holders (remove bulbs). You should then be able to lift it out of place with some jostling.
Thank you. Very useful information, presented clearly and concisely.
>>>>>>>>>HELLO STEVE: I KNOW YOU WERE SHOWING HOW TO REPLACE THE SENSORS BUT IT LOOKED AS THOUGH THE DEFROST TERMINATION THERMOSTAT NEEDED CHECKING. LOOKED LIKE A SEPARATION BETWEEN METAL & MOLDED BLUE & COULD POSSIBLY BE BAD. THESE ARE USUALLY A VERY WARM 140 DEGREE LIMIT RATING ON GE BUT A BAD ONE WILL PREVENT PROPER DEFROST. I ALWAYS CHECK TERMINATION T-STAT ALONG WITH HEATER FIRST AS A PRACTICE. VERY NICE VIDEO, BY THE WAY. THANKS
Excellent thanks. Problem I have is the sensor for my Hotpoint FF isnt listed anywhere on the web. I've searched and searched nowhere is it listed. So my question is can any sensor be used? Many look like mine but dont have the FF model number listed against it.
I'm surprised that the only way to change a sensor is to cut the connectors. You'd think they were plug ins. Many thanks for an informative video.
we have a frig like the one in your video. The ice maker makes ice but it is wet when it drops into basket below then refreezes into solid clumps. The auger can't push the clumps through the door and we end up having to clear the basket manually. I have a new thermistor but not sure it will solve the problem?
Hello!! I have a Frigidaire LGHC2342LP1. The freezer temperature started to go up and down for the last days. I set it to 2 but stay there only for few mins and then stars to go up and down again.
Thank you very much for your help
Hi Betty,
It sounds like you need to replace the defrost thermostat kit. Here is a link to the part: www.partselect.com/PS469522-Frigidaire-5303918214-Defrost-Thermostat-Kit.htm?SourceCode=12&SearchTerm=LGHC2342LP1&ModelNum=LGHC2342LP1
Good luck with your repair!
Hi Ben,
Just to clarify, 40 degrees F in the fresh food (fridge) compartment and 0 degrees F in the freezer section is right within the range each are supposed to be. Is there a separate issue you're having with your refrigerator?
Great sensor location help out !
Hello Mr. Steve
Thank you for your responses. I mean that the freezer and refrigerator are working fine until the compressor or evaporator fan turn off around 30 minutes, it is less cold air into freezer and refrigerator compartment. After that the compressor or evaporator fan turn on and run til coldest as setup. This is temperature sensor, isn't it?
I am watching your video, I see 3 temperature sensors in difference location, so which the temperature sensor I can fix it?
The normal operation of this refrigerator is that the compressor and evaporator and condenser fans will run until the set temperature is reached. At this point the temperature sensors will cause the control board to shut off the compressor and fans.
When a predetermined temperature rise has been detected by the sensors, the cycle will start over. This will continue until the control decides that a defrost cycle is needed and the components will be turned off and the defrost element will be energized. When the defrost cycle has been completed, normally about 30 minutes, then the cooling cycles with continue. The defrost cycle would normally occur less than once a day.
If a sensor is defective, the symptom would normally be a higher or lower temperature being sensed in either the fresh food or freezer section.
i am wondering until now in 2020, why manufacturer make it hard to replace these temperature sensors. if i would design a refrigerator, i will make it easy to replace these temperature sensors without cutting wires and have easy access to the locations of these sensors. if you are techicians, have you found a side by side or french door refrigerator that is easy to repair? i also will design a refrigerator that have access panels at the back for all parts that could fail including the defrost heater. i think we should keep repairing refrigerators to protect our environment.
I will check the temperature sensors first. I can hear the evaporator fan motor running, so I don't think that's the issue. It appears that it just won't kick into defrost mode, as it's getting so cold, that ice is forming around the coils and halting the whole system from cooling.
I just replaced two sensors in my GEProfile. How long does it take to see if it solved my warming issue? currently temperature says 70/78. Motor is running and all lights as well as control board functioning. Hoping the sensors are the issues
Cordell Washington its your diffuser thats getting stuck open it should close thats why your fridge side is freezing up...
The mother board checks out and so do all the theromisters in my Refrigerator...the fan stops and if I flip the blades with my hand it starts up. it will run like this and not show any problems for a period of time and then stops again...i again flip the fan and the cycle starts over....I think I have a fan problem of some sort...what do you think i should do next???
Start with testing the temperature sensor in the fridge and if that's okay then look at the defrost thermostat, heater and the timer.
My temp sensor in the refrigerator is two different colors does it matter which one is connected to what. My model number GYE22HBLDTS also do I need to replace all three of the temp sensors I replaced one but the refrigerator is still too cold I already replaced the evaporator fan which was definitely defective because there was Ice build up in the bottom of the refrigerator it is still saying that the refrigerator is 20° and it's set on 34
Hellow, tthanks for de video, but culd you tell me what kind of tests did you do to know that it whas wrong.
becouse I have a similar problem but mine is whit a side by side Samsung model RS26DDAPN
How do you know when a sensor is bad, is there a way to check on the mainboard?
Great video. Is there a way to test weather sensor is faulty? I have 3 sensors and I'd prefer to test them before I start replacing them...
Hi I have a LG profile side by side fridge. The temp is not adjusting it keeps rising. I set it at 0 on freezer and 37on on fridge and keeps going up. Now is reading 16 on freezer and 42 in fridge already replace compressor. What could it be. Thanks
Hi - My GE side-by-side refrigerator (model GSH25JSXBSS) had a bad control board that I replaced. After that replacement, the compressor seems to be continually running and the freezer gets really cold. In a few hours of operation, the temperature in the freezer got down to -15 F and the refrigerator section got down to 29 F. The only way to turn off the compressor is to hold the warmer button for the freezer till the display shows 0 (range is 0 to 9 and 9 is the coldest). Does this indicate a sensor failure and if so, what sensor has failed here? Is it the freezer sensor, defrost sensor, or refrigerator sensor. How do I test them? Thanks!
Good job.thanks for sharing.
I just changed the temp sensor that turns on the heater to defrost. But it seems the freezer will not shut off, it keeps running. Is this a bad temp sensor?
I have a GE side by side like in your video and no matter where I set the freezer control knob, the compressor does not stop. Everything in the freezer is frozen and hard as a rock. This has gone on for a few weeks but now the water tube to the ice maker is frozen too. The fridge bottom drawer also freezes the produce. What needs replacing? Thanks so much!
outscoutadventure What model number is your fridge?
***** Model# GSS25IFPA WWSERIAL# FF202732 sorry, I sent this earlier but apparently used the wrong method.
Which thermistor should i replace if food is freezing in fridge?
Is there any sense on how to install the sensor wires? I mean is there a plus and a minus to be aware of or we can put any right and left wire in any order?
it will also show its still show its @ 0 deg, on the display when actually its at 50 during that time as well
I have GE side by side refrigerator with model no. GSS25QGTB. I recently changed my damper but the refrigerator section is freezing my vegetables. I suspected I have bad temp. sensors. How many temp. Sensors do this model have in total? Thanks.
I never heard a remedy suggestion after you got my GE model #. I don't know how this works over You Tube but I guess I was expecting a possible fix I could do with buying parts from you. Please enlighten. Thanks.
outscoutadventure Check the temp sensors and if they are ok, then I would suspect the control board.
Hi there, sorry to hear about this problem with your refrigerator. Can you provide the model number so that I'll be better able to help you troubleshoot? Thanks!
hi , we have a refrig. GE it is not freeser in fuction but the temperature is slowly cool inside the refrigerator, wath do you think is the problem and how I fix the problem
what are those red rubber things called that he's using to connect wires?
Hi please help us how to change the single actuator,and where can we buy it,Thank you
My ge fridge side by side cord got cut.so I refixed it now only the lights work in side the fridge and the control panel on door is off??
I have a GSS22JEMD WW refrigerator, and the trade the send the water to the ice maker was off enough to let water drip down into the evaporator fan it was iced up... after removing the ice fan wouldn't work anymore.... y replace the fan but still not working... what should i checked next??... compressor running, is not freezing up so i am assuming the defrost is working... i check the defrost heater and is fine... just dont know where to go next... please could you help??
I have a GE Profile side by side model # psc25pswa ss and the upper freezer part will stop freezing like its going into defrost mode but stays in it so long Ice will melt and things in freezer will start to defrost temps will reach 50 deg,, it will stay like that for hours then it will finally start working right again,, does this sound like the themistor? this happens every day..
Hello , I have a GE Artica Profile PSS25NGNA WW , I've been trying to Set Up the temperature control , most of the times freeze the food , although it is Set Up at 37*F, the very next time change to a different lower temperature , same with the freezer the temperature is up and down . I went to GE website but they don't recognize that model number ,( probably they sell the info only ) so if you have the step by step instructions please send them out . Great tutorials .
Thanks.
gerardolasvegasable I will have Steve look into this for you!
We have a GE PSS25NGNA and the water dispenser froze. Ice maker was working fine. We read that the water dispenser line ran through the refrigerator. Our refrigerator temperature control was registering 31 degrees. We reset the control and left the door open until the water line unfroze. The temperature control will not maintain the recommended temp. It keeps going back to 31-32 and refreezing the water dispenser and food in the adjustable humidity crisper for veggies. Which sensor do you think needs to be replaced?
Hi Lynn; apologies for the delay in getting back to you. This question required a bit of digging! I would suggest the sensor located in the fresh food section on the left side wall. All of the sensors are the same part number so you could substitute to help isolate the problem, but they are also relatively inexpensive, so buying a new one is your best bet. I would start with the sensor before trying anything else. Hope this helps, and good luck with your repair!
I have a ge dshs9ngybcss, both compartments running on the hotter side. Run the test mode for the thermistor P-1, P-2, P3, P-4, 0-5. I understand thermistor 5 is bad but, which one is it? Where is located?
ok, I was able to take test the fresh food thermistor. It reports 15.5kOmh when emerged in ice water. The fresh food evap thermistor is reporting 17.4kOhm without being submerged. These number are pretty close to normal so I'm thinking my issue is not a thermistor related. So what else could it be? Thanks
The temperature in my GE refrigerator and freezer both fluctuates up and down, it ranges from -6 to +13 on the freezer side and +36 to +48 on the refrigerator side. I google the symptoms and it brought me to your other video tutorial for replacing the control board. I replaced the control board and it did not help. Is there any other advice you can give me in repairing the refrigerator or will it be a job to big to handle for a novice like me. Thanks.
I have a GE G5525WGPA CC, the frezzer side keeps freezing on the back panel. I change the thermostat defrost 2 times but everytime I change it it only last about a week and it starts to get frozen from the back panel again. Can you help me please
I have a GE PSH23PSRA fridge that's reporting temperature around 40F in the main compartment, and close to 0F in the freezer. I'd like to think it's a thermostat, and I located one of them in the middle panel behind a small plastic cover. How do I remove the cover without damaging it? I'd like to test it with an ohm meter before replacing it?Thanks,
-Ben
We have the same model. what is causing the frig to freez up with the settings on #1 the lowest.
I have a ge sxs model #: gss25qgsc bb the fridge side stopped cooling and determined the coils in the feezer are freezing over. I replaced the defrost heater even though the old one tested as working also tested the thermostat and found it to be working. However,still have the problem. A tech from appliance parts pros said if it was not the defrost heater, thermostat, or thermistor then it would be the main control board. Is there any way to test the thermistor such as with a multi-meter?
Hi again, sorry about that - it can be hard to visualize something like this since I'm not there to see it when my own eyes. :)
Those little oval covers should pop off with some help from a putty knife. They'll have tabs keeping them in place, and you should be able to locate the resistance from the tabs by sliding a putty knife underneath, and then depressing the tabs with the putty knife.
I hope that helps!
Hi Ben I've a Frigidaire FRS28XHA. Periodically, the evap. coils will frost over (in freezer) and the refrigerator temp heads toward 60. I would do a total defrost and problem solved for weeks or months. Recently, some items in freezer had fallen and partially blocked the coils for several hours. The freezer remains ok,but refrigerator got warm, I did the defrost, but it went to 43 degrees for a few hours, then back to 50. Any advice? Thanks much, Timo
Hello! I have a GE GSH22JSXA (side by side) and I am wondering if it needs a new sensor? At first it was running all the time and items were freezing in the refrigerator. I set it a "2 or 3" temp setting and that seemed to help. Now it has gone the other direction and isn't cooling. I have had to set it at the highest setting of 9 to keep it cool although today I've noticed it isn't cooling! Any ideas?
Hi Kelly, a little digging indicates to us that you're not alone with your particular model. In fact, a warm fridge section is the most common problem with the GSH22JSXA, reported by 19% of customers experiencing issues. Head on over to our repair page. where you'll see a common problem among all "too warm" refrigerators is the air inlet damper or baffle. www.partselect.com/Repair/Refrigerator/Refrigerator-Too-Warm/. Have a look at your model and see if you can identify a problem here, and get back to us with your findings! You are correct also in identifying that it could be an issue with the temperature sensor, especially if you were having problems with the section being too cold previously. This part fixed the problem 18% of the time for our customers with your model. A new Defrost Thermostat fixes the problem 31% of the time, and a Defrost Heater Harness Kit solves issues 35% of the time. Head to the parts page for your fridge model for more: www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=GSH22JSXASS&mfgModelNum=&fkMfgID=2&ModelMasterID=335791&PID=10 Hope this was some help; let us know how you go!
We have changed the main board, thermostat and heater yet the unit still freezes up after manual defrost on SXS 25 GE . Don't know what else to look for, as soon as we plug it back up the coils begin to frost up. Only other part was the sensors, we did not change them out. HELP
i have a ge psg22sisafss i have a problem with the fresh food section that the temp isnt stable and sometimes too cold it seems like the flap is open most of the time in high temp and i send up seeing the freezer go from -20 C to -9 at times. i have a feeling it might be the fresfh food temp sensor. how can i test which one is the faulty one?
I have same issue we changed board, heater and defrost thermostat unit still freezing up...
I have a gss25qgsc bb model ge sxs how many of these sensors are in this model? M coils keep freezing over and the fridge seems to not cool as well so I replaced the defrost heater and the main control board. I am planning to replace the thermostat and all temperature sensors in hopes to fix the issue, but I'm not sure how many I will need for my particular model.
If one sensor goes bad (old model) is it necessary to change all other sensors to the new model?
I have a kenmore side by side. The freezer dial must be set above 58 for the freezer to work. Any setting below that causes the contents to thaw out. Also, the fridge side is warm even if I set it at the highest setting. Any suggestions ?
+Afif Baz What model number do you have?
I have a GE double side refrigerator model # GSH22JFTAWW. The depensor control board does not display any functions, no water, no ice and the refrigerator is not turning on to cool down. However when I open the door the lights inside on both sides are working. Should I replace the depensor control board?
Start with verifying that there is no power being supplied to the compressor, that you have incoming power to the control board and that the external controls are functioning properly. Look on the control board for signs of arcing, burnt connections or damaged foil. Remove power from the appliance before inspecting the control board. Hope that helps.
how do i solve the water line freezing i checked the pipes on my ge fridge and the freezing occurs from the line that starts from below the door outside of the freezer to inside but it looks too scary to try and access the door.
nice video I need to learn something < What cause the refrigerator freezer not getting freez? I check the starter relay it should be when the compressor running you heard click and then a while is off and then on back. the fan in the coil under the Ref is blowing, but I did not heard the start relay is click. the refrigerator cold 42 degrees, but the freezer is 42 also. what is the issue for this problem of my ref? i check also the fan inside the freezer is not running it should be feel like blowing the fan? is there problem both the start relay and the fans for freezer? would you please teach me how. i order parts already for start relay and evaporator fan motor for freezer?
Hi, could you please provide your model number and our team will be happy to look in to this for you.
i opened my GE Profile freezer to find everything melting inside. the lights came on and it was still making noise as if it was running. my model looks like the same as in your video, but it does not have the water and ice dispenser in the door, it is only 10 years old. i unplugged it and removed the back panel and attempted to clean the filthy filter in the bottom back right. i plugged it back in and re-set it. nothing. the temperature gauge stays put at 37 on the freezer side and 43 on the refrigerator side. because of cost, i do not know if i should hire someone to repair or buy a new one.
I'm sorry that you're having problems with your GE profile freezer. It's a tough choice deciding to repair your fridge or buying a new one. If the cost is about 50% of the cost of a new appliance then it is worth getting the repair done.
Hello Mr. Steveil
My GE refrigrator, model GSH25JSTA SS has a problem, I don't know which parts is defected. The freezer and fridge are working fine but after the evaporator fan stops and the temperature inside is cooling down until I saw in freezer has a line water and the evaporator fan is working again until the coldest. Is the temperature sensor or defrost timer has problem?
Thank you so much.
I do not understand what is happening after the evaporator fan stops. Could you please explain that again?
when installing a temp sensor in the freezer on a GE Profile side by side Refrig/Freezer does it matter which of the 2 wires get connected to original other 2 cut white wires that the sensor was attached to?
Hi Ron, No, it doesn't matter which wires get connected.
Will a bad temperature sensor make a fridge keep running none stop... Or what could be the problem here?
+POLOAZTECA It depends on the model number. What model is your fridge?
Thank you so much for this video! I changed out the part no problem!
My refrigerator is model ge gss22jemd stopped working, is not none of freezing 2 sides. League usually turns the lights on, but not freeze anything. What could have happened? Can you help me? I lived in the USA, now live in my country (Brazil) and here no one fixes this refrigerator model. thank you
Hi Steve,
I have a Samsung side by side refrigerator Model RSG307AARSXAA0002. The Frige is cooling only till 45-50 F and the Freezer is not cooling at all. I have opened the freezer back door and noticed the fan is not running and defroster is not cooling at all. But the lights in the fridge are on and the refrigerator is cooling till 45-50 F. The temp for Freezer is set to 0 and 34 for Refrigerator. Please help me what could be the problem.
Samsung has provided us with very little information on their refrigerators so we cannot offer you any valid advice. I would suggest that you contact a local authorized Samsung service company.
Hi, My Kenmore refrigerator freezer just started to drop to -35 below, the frig is fine. This just started to happen last week. You helped me a few months ago on this same fridge, I replaceed the slide control switch on the temperature control and it has worked fine up until last week. Any thoughts?
Hi Mark, please provide your Kenmore refrigerator model number and I will be happy to research this for you.
25370623410, thank you so much for getting back to me.
Would a bad sensor cause the actual temp on the front of freezer door to be wrong?
Thanks in advance
Fred Kraskov What model number do you have?
I have a GE #GSH25JSTDSS (very similar to the one in this video). I am noticing that it will not go into defrost mode whatsoever. About 2 months ago, I thawed the freezer, as there was too much ice around the evaporator and the fridge and freezer wouldn't stay cold. After that, the fridge ran really well, up until now. It seems like the issue is happening again. In my searching I could not find a defrost timer for this model, should I replace the temperature sensor to start with? Thanks!
I have a Frigidare Model #GLRS237AZ. The fresh food side is freezing food, I've turned the temperature to the warmest temp, but it still freezes. Could you please help.
Steve, my GE profile refrigerator is a 1994 model, will it have these thermistors?
my thermister measures 26k ohms. I was told that 16 k is what it should be should I replace it?
i have GE Profile Arctica model psm27shrb ss
and i have two problems, om the temperature control panel the freezer display does not turn on, and some times my food in the freezer gets melt it. What do i need to check o replace? thanks.
Is there not a defrost timer for this model I cant seem to find it
My saviour.. thank you
It is not hard to see, the defrost thermostat is also bad because it is swelled out of the metal case and the epoxy is exposed along the edges.