How to Quickly Install and Use a Dremel Flex Shaft
Вставка
- Опубліковано 20 гру 2021
- Here's a short video on how to attach and use a Dremel Flex Shaft 225-01, as well as my opinion on it at the end. It's an inexpensive accessory that can really make a difference depending on what you're up to, so make sure to check it out at the link below. Enjoy!
Like what I share and want to support the channel? Buy me a coffee at the link below
ko-fi.com/logscarvingclub
Thank you for watching!
Amazon links for the tools and accessories I use below:
Amazon Prime 30-Day Free Trial:
amzn.to/3BqW2tz
MY TOOLS:
Dremel Flex Shaft: amzn.to/3ehsAJG
My Dremel 4300: amzn.to/3DOBhFJ
My Dremel Lite: amzn.to/3J4b61P
My Dremel 8220: amzn.to/3pj32Ch
My DeWalt Orbital Sander: amzn.to/3PJHN7A
The oil and wax I use: amzn.to/3sBv2Dv
My most used bits and burrs:
SHAPING:
Dremel 561 amzn.to/3dOQpIw
Dremel 562 amzn.to/3rVsSy9
CARVING:
Kutzall Xtreme Flame Burr amzn.to/3yl8veT
Kutzall Original Taper Burr amzn.to/3m0TVnN
Tungsten Carbide Burrs amzn.to/3s4S4Ct
ENGRAVING:
Dremel 191 amzn.to/3DScmkG
Dremel 106 amzn.to/3F46sP3
Dremel 111 amzn.to/3m0zA1Q
SANDING:
Dremel 84922 amzn.to/3GFMvhw
Dremel 407 amzn.to/3pPbp7V
Dremel EZ402 amzn.to/3yhJote
Polishing Wheels amzn.to/3oNDxsP
Dremel Sanding Disks amzn.to/31UsoNR
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.” "As an Amazon Associate I earn from qualifying purchases."
Kutzall Link:
5% off Kutzall products with promo code: DREMELTIME (in uppercase) kutzall.com/collections/flame...
Wear a mask, eye protection, and hearing protection, and consult your tools' manuals prior to using them to ensure safety. This video is for my insta @logscarvingclub.
If you're looking for more wood carving designs and videos, I recommend watching the video where I carve a greek paddle with a Dremel 4300. I use Walnut, Poplar, and Epoxy! The epoxy was a hassle but came out really cool. - Навчання та стиль
I've had a Dremel 4000 for years but had never used the Flexi shaft that came with it. Today I wanted to do some finer work so decided the Flexi shaft was needed, but I couldn't see how to get the shaft to turn so searched and found your video. I then realised the obvious - that I needed the "DRIVE CAP that came with the Flexi Shaft"!😊. Rummaged around in my Dremel bits container and surprisingly found exactly the thing I needed hiding away in a corner. Brilliant!
Thanks for doing the video.
No problem Peter. Glad you got it going! Thanks for watching
Total lifesaver for a newbie with a secondhand dremel 3000 🙏🙏 thank you!
No problem Alexandria! Thanks for watching
Great video. Mad respect for answering comments.
Thank you - also I love getting comments to read
Thanks! I have an older (old) wired dremel, but your video was just the ticket to hook up my old flexible attachment! These are great also if you are working with glass and want the work to be wet. The electronics are hung high and dry. Thanks again!
Great point about glass! How do you keep the glass wet while working? I often struggle with that
Usually you have a small stream of water constantly running over the work to keep flushing the dust/material away from you. So working in a sink.
thank you for this video. Great Help.
Glad it was helpful! Thanks for the comment
Thank you! This was very helpful
I’m glad it was helpful Jessica! Thanks for commenting
thank you for that.new to this dremel working, oldmick
You're welcome!
Thanks! I'd forgotten about that tip with the square hole.
Happy to help! Thanks
That was what saved me! I grabbed the item I thought was my Drive cap (it was black) thinking they were the SAME -- they weren't! So I wasted some time but thanks to you I'm Flying Right now! @@LogsCarvingClub
ıt was very helpful, thank you, i fixed it by your video.
Great to hear! Thanks for watching.
Thanks mate🤝
No problem Kerry!
Thanks for the info…
Any time! Thanks for commenting!
Thanks!!!
No problem!
Nice vid. I've seen people use a pedal, so you don't need to reach to stop it every yime
Hi! I was considering getting one but I don’t think I need one
I just bought the dremel 3000, it came with the flex, i followed your instructions but it's not working, any ideas please?
You can use a Foredom foot pedal to control the on/off of your dremel.
Sounds convenient - have you tried it?
I bought a quick change adapter and it fits on my flex shaft. Looks like you have one on yours. It is different from the regular collet cap that comes on most dremels. If you don’t want to use the little wrench grab a gerber and lock the pliers on the outside and just check that you finger tightened it enough. I have never lost a bit
Hi I'm in UK. I have just bought a DREMEL 3000.
Can I attach BUSCH BURRs these are sold by jewellery maker TO MAKE HOLES IN BEADS and PEARLS bigger?
I have contacted Dremel and Jewellery Maker. Getting an answer is tough. Janet
You can definitely get quick change chuck for it.
Yeah it’ll fit, it’s a bit bulky though and if I remember correctly you’re not supposed to use it for whatever reason
Can the flex shaft be attached to Dremel Lite? I can't find any reference that it's compatible.
Hi Keng, it looks like you could attach it since the dimensions of the nose cap are the same as a full sized dremel, but I don't see the need to use one since the dremel lite is so light and small anyways, and it's cordless. The dremel lite also doesn't have anything to let you hang it upright and I don't think it will have enough power to sustain the flex shaft, so I wouldn't personally mount a flex shaft onto it.
Is there a way to use this tool to accommodate 1/4" eraser sticks? They work great for polishing buttons. I was using an architects electric eraser but they no longer make the unit I like that is smaller for a woman hand. The flex shaft looks like it would work but only accommodates 1/8" wondering if they make an adapter to fit larger shafts.
Hi Mary, I don’t think the flex shaft (or a regular dremel for that matter) will take a 1/4 inch attachment. If you find an adaptor, I’d be very suspicious of it. You could try a foredom, or a die grinder (both expensive sorry) or maybe a regular power drill?
So what is done with the dremel motor when using the flex shaft, yeah, hang it on the wall? The workstation would be great, if you could replace the captive nut with the flex cable. Same goes for the dremel vice.
I have mine hung up on the wall next to my carving table about 3 feet above the surface on a DIY mount. You're supposed to keep it higher and minimize how much the shaft bends. I haven't been able to try the workstation (I've never had the need). Do you like yours?
I have this type dremel and flex shaft but it makes strange noise while turning on. What can be wrong? Without flex shaft it works silently but when i use with flex shaft it makes strange noise.
I'm not sure without seeing it... sorry. Mine sounds different with the flex shaft on, but I believe that's normal. Are you sure the shaft and drive adaptor are configured correctly?
i have a new Dremel and it didn't come with a square part either, the shaft doesn't have one also
If you mean the part that couples the shaft cord with the dremel, it should’ve come with the shaft
@@LogsCarvingClub their all round
I'm using a dremel 4300 with a flex shaft. I can't get the cutting disc off of the flex shaft. I cannot find a video on how to do that
Sometimes it gets stuck, have you tried loosening the collet nut as much as you can and pushing the bit in instead of out?
If the problem is the shaft won’t lock to loosen it, I’m not really sure. Usually I just mess with it and press the shaft lock button as hard as I can
How come you need to hang the dremel above the flex shaft?
It helps to ensure the flex shaft doesn’t bend too much while you’re using it, also it keeps it out of the way. If the shaft bends too much you stress the cable and can break it
My drive Adapter doesn’t look like this OR have a square hole. 🤷🏻♀️
Is it a different brand? Or maybe a newer model? I may have to look into making a new video if they updated the model
_Thanks!_ The damn manual doesn't mention anything about this.
No problem - thanks for commenting!
The shaft didn't work!
Are you sure the drive adapter was on and the metal inner cable was in there properly?
@@LogsCarvingClub well, it finally worked after everything was tightend to its max.