Please how can I calculate the compressive strength of the concrete after getting the pulse velocity from the pundit. And how do I configure the conversion curve?
The Instrument can be loaded to conversion tables using the PunditLink software. According to the manual the "Conversion curves are very much specific to the concrete under test and there are many examples in the literature."
Hi could i knw in a indirect method of 1meter must i change the distance everytime i go to the next point? Say in 100mm distance inbetween each points. So first point is 100 next is 200 n so on...till 1meter.
You can set any spacing... the 100mm is just convenience ... the limitation on the spacing would be how much signal is being received ... I have not experiments with very large base lines when doing this measurement.. Also I would image that, the logger the baseline the lower the accuracy...
Tecch Rentals, can I share your video content and your include your UA-cam channel and contact information? I want to show contractors and engineers what options they have for crack evaluation.
Has to be your calc. because they both use the same equations .. www.c-s-h.ir/wp-content/uploads/2015/10/BS-1881-Part-203-86.pdf This document lists the equation if you used 150mm spacing and not 100mm spacing..
Convenience for the tape measure etc... and it provide sufficient accuracy for this technique. You can set it to any dimension, depending on the physical characteristics of the job.
Can we determine crack depth in alloy instead of concrete using the same method?
all good, just a bit more explanation. thank you. hope to see more and different type of tests.
Nice explain
good thank you 🥀♥️
is it BS 1881 part 203?
Let me know the limitation of crack depth measurement by using this Proceq Equipment?
Nice Presentation
Thank you. We're glad it was helpful.
a nice presentation. use a bracket can easily fix the distance.
Will the rebar affect the sound?
How much cost this instrument ?
Great video! 👏
Please how can I calculate the compressive strength of the concrete after getting the pulse velocity from the pundit. And how do I configure the conversion curve?
The Instrument can be loaded to conversion tables using the PunditLink software. According to the manual the "Conversion curves are very much specific to the concrete under test and there are many examples in the literature."
@@GraemeMurphy54 Please I need a used proceq pl-200 tester
what is the price of this equipment?
Hi could i knw in a indirect method of 1meter must i change the distance everytime i go to the next point? Say in 100mm distance inbetween each points. So first point is 100 next is 200 n so on...till 1meter.
You can set any spacing... the 100mm is just convenience ... the limitation on the spacing would be how much signal is being received ... I have not experiments with very large base lines when doing this measurement.. Also I would image that, the logger the baseline the lower the accuracy...
Tecch Rentals, can I share your video content and your include your UA-cam channel and contact information?
I want to show contractors and engineers what options they have for crack evaluation.
Glad you find the videos helpful. We would be happy for you to share them with your contractors and engineers. Thank-you.
@@TechRentals , awesome and thank you.
@@TechRentals Please I need a used proceq pl-200 tester
Bu cihaz Bi harika dostum
oğuzhan varol hfbfjg
How to calculate crack depth manual use BS 1881?
Correct. I didn't mention the standard used in the video.
@@GraemeMurphy54 i try calculate manual use BS 1881-203:1986 but result not same like machine.. Its confusing me 😥
Has to be your calc. because they both use the same equations .. www.c-s-h.ir/wp-content/uploads/2015/10/BS-1881-Part-203-86.pdf This document lists the equation if you used 150mm spacing and not 100mm spacing..
Why do you use 0.100 m
Convenience for the tape measure etc... and it provide sufficient accuracy for this technique. You can set it to any dimension, depending on the physical characteristics of the job.
Cost Indian currency
Techinically i didn't understand anything you were doing !