Jeep Patriot 2009 2.4L Serpentine Drive Belt Replacement

Поділитися
Вставка
  • Опубліковано 4 гру 2024

КОМЕНТАРІ • 75

  • @factsnfeatures
    @factsnfeatures Рік тому +10

    Best mechanic youtuber ever. Instead of close ups on places you cant tell what your looking at, he zooms out and makes an entire CAD drawing for each step to follow along with. Legendary.

  • @redsoxbrian
    @redsoxbrian 5 місяців тому +3

    I just wanted to say thank you for your jeep patriot videos. They have saved me over $2,000 in the last month. I have used your videos to change my front brakes and rotors, the serpentine belt, and alternator. I am the least mechanically inclined person I know, but your videos have given me the confidence to attempt projects that I never expected to be able to compete. Thank you for making these videos and keep up the good work.

    • @mtlcarguy
      @mtlcarguy  5 місяців тому

      Congratulation !

  • @matthewjones1002
    @matthewjones1002 2 роки тому +8

    I was 100 percent ready to go into Rage Mode replacing this belt even after watching this video. Took 10 minutes and super easy. Thank You so much

  • @zgionhidrofire4418
    @zgionhidrofire4418 Рік тому +5

    Thanks a million for the diagram!!! The steps are now clear!!! Thanks so much

  • @thomashinckley5437
    @thomashinckley5437 3 роки тому +9

    I watched this video earlier today and this afternoon went out and changed my belt in less than 45 minutes. Great diagrams! Very thorough explanations, too. Thanks for posting!

  • @nain426
    @nain426 Місяць тому +2

    All your videos are very well sctructured and pleasure to follow. Thank you!

  • @kikoyyoutubetv8206
    @kikoyyoutubetv8206 2 роки тому +3

    New friend here watching from Canada 🇨🇦 orig from Bohol Philippines 🇵🇭 thanks for sharing your knowledge I'm one of your beneficiary I love fixing everything and most of all I maintain my family car

  • @jisifoff2469
    @jisifoff2469 Рік тому +3

    Awesome breakdown and video.
    Thank you ☺️

  • @Souls-iq8to
    @Souls-iq8to 2 роки тому +6

    Thank you so much! I had the squeaky noise, changed the belt following this video, and it was easy to do. It was my first time too so I was nervous. My car has been running great ever since

  • @Brenda-nc7fq
    @Brenda-nc7fq Рік тому +4

    Very good video! One of the best I have watched. Thank you for posting.

  • @tonyjordan1320
    @tonyjordan1320 3 роки тому +2

    I swapped out my niece's belt yesterday on her Jeep Patriot using the info in this video, it was still a ordeal getting the belt around the proper pulleys but I pulled it off...Many thanks for posting this video, it really helped....

  • @silverjava1one971
    @silverjava1one971 3 місяці тому +1

    I will be doing this job in a couple days. Knew it was easy but was just making sure I was right. Thanks for the quick video and getting straight to the point.

  • @Snillorful
    @Snillorful 7 місяців тому +3

    Great video, made this repair much more simple. The step by step diagrams were great.

  • @nelsongomez839
    @nelsongomez839 3 роки тому +3

    My jeep's belt broke, just before I could sell it. I thought this was going to cost me a bit of money, in terms of towing it and repairing it at a mechanic shop. Then I came across your video. The amount of detail, schematics and step by step information was THE BEST I have seen from any DIY car repair videos. Just wow, thank you so much!

    • @thisthat5874
      @thisthat5874 3 роки тому +1

      How many miles were on it? I’m at 100k now and it seems loud

    • @nelsongomez839
      @nelsongomez839 3 роки тому +1

      @@thisthat5874 140K kms

  • @reddog907
    @reddog907 Рік тому +3

    I am going to do this in a couple of weeks , I have all the parts and will changs two pulleys and the tensioner. Thanks for a great video.

  • @paulanderson3339
    @paulanderson3339 3 роки тому +5

    Excellent video! Straight and to the point, took only about 25 minutes to install on my 07 2.4L sebring, thanks for posting this great video!

  • @mallorykirby2261
    @mallorykirby2261 Рік тому +3

    Thanks this helped, all I had was a short 5/8 wrench and could not pull the tensioner back with one hand with it, but after some thinking and hunting I cut a short piece of pipe that would fit over the other end of the wrench to make it longer and give more leverage, that made it possible.

  • @brentberry3832
    @brentberry3832 4 роки тому +10

    Wow! Fantastic video! Wish all instructional videos were like yours!

  • @uniquecoriz6274
    @uniquecoriz6274 3 роки тому +3

    Thank you for the information , safety tips and blueprints. It was great to fix my Jeep after a day of over priced help.. Me and my husband got done with no extra cost..We thank you for the knowledge that helped us fix our Jeep. Many blessings to you

  • @northerntranquility1614
    @northerntranquility1614 2 роки тому +5

    Thanks for the video great tips very helpfull Dale

  • @FreddySantiago-u6f
    @FreddySantiago-u6f Рік тому +2

    Thank you so much for you're Video. It was very helpful and I was and I was able to install my belt easily with you're help.
    I watched other videos and non if them were helpful . Awsome job thank you again.😊

  • @Bad-Squishy
    @Bad-Squishy 3 роки тому +4

    Exellent Video! All the details and illustrations are very helpful. Thank you

  • @nikolaiua4512
    @nikolaiua4512 4 роки тому +2

    самое толковое видео по замене приводного ремня джип патриот .спасибо лайк и подписка

  • @CAPT1ANGU1TAR
    @CAPT1ANGU1TAR 3 роки тому +4

    Great video! Very helpful. Thanks for taking the time to develop such great diagrams. Helped me get out of a pinch replacing the belt on my Patriot.

  • @judedavidson5453
    @judedavidson5453 4 роки тому +14

    Mang you went through such grate lengths to make this video are you a instructor of some type,thank you tremendous work.

    • @mtlcarguy
      @mtlcarguy  4 роки тому +3

      Not at all, since I am retired, I have time to draw illustrations to help the viewers.

  • @Alexanderrodriguez-gj3wl
    @Alexanderrodriguez-gj3wl 2 роки тому +3

    Super useful! Thanks !

  • @byronlee7053
    @byronlee7053 3 роки тому +4

    Thanks a lot. VERY much useful and detail. You gave me DIY motivation. Perfect!!! thanks again.

  • @metalmadness2271
    @metalmadness2271 3 роки тому +3

    What an awesome video!!! Thank you!!!

  • @eduardobollini
    @eduardobollini 3 роки тому +3

    Very good job, clear and illustrative. Thank you!

  • @ibrahimabah2893
    @ibrahimabah2893 4 роки тому +3

    Good job explaining things and given us clear instructions and things to avoid. I appreciate you.

  • @OneSmellyTaco
    @OneSmellyTaco 3 роки тому +7

    Very easy to follow, informative and to the point. Your blueprints make it a breeze. Thank you for the upload. I’ll be doing this to my patriot soon. Cheers
    Update:
    I followed your video step by step and it was very simple to do. Thanks again. Keep posting videos!!!

  • @BHryhoruk
    @BHryhoruk 3 роки тому +3

    best detailed video I have ever seen.

  • @rebeccamoore8356
    @rebeccamoore8356 2 роки тому +3

    Great video my friend, really enjoyed the content.

  • @websterilderis2554
    @websterilderis2554 3 роки тому +3

    crystal clear. thanks my good man.

  • @유병운-l8w
    @유병운-l8w Рік тому +3

    you did good job

  • @enockkhutha8533
    @enockkhutha8533 Рік тому +2

    Very useful

  • @meteoro2828
    @meteoro2828 2 роки тому +1

    Thanks

  • @ThesolarelectricianPR
    @ThesolarelectricianPR Місяць тому +2

    Thank you master I really appreciate it!!!!👍

  • @tonyjordan1320
    @tonyjordan1320 4 роки тому +3

    Great informative video, my niece has a 2014 Patriot with the 2.4l motor, would it be the same belt routing???

    • @mtlcarguy
      @mtlcarguy  4 роки тому

      Yes, the 2.4L World Engine was used from 2007 to 2017 with only minor changes.

  • @ManJO601
    @ManJO601 3 роки тому +2

    Hello Mr. MTLCARGUY I love your professional videos. Can you please send a video of how to 2012 jeep patriot 2.4 engine belt tensioner removal ?? Much appreciated. Thanks Mack

    • @mtlcarguy
      @mtlcarguy  3 роки тому

      I don’t plan on replacing a drive belt tensioner or a belt tensioner pulley any soon.
      Often the tensioner pulley's bearing is the problem. Tensioner's pulleys are also sold separately.

  • @caseywesley9811
    @caseywesley9811 2 роки тому

    You sounding good but what kind belt is it man putting this belt together is like the devils puzzle it always got a catch

  • @MarkMechler
    @MarkMechler Рік тому

    Hi ,like the Vid but what size box wrench are you using here ?

    • @mtlcarguy
      @mtlcarguy  Рік тому

      16mm or 5/8 in. When I show the tools @ 2:07 it is shown on the lower left side.

  • @danielwelsh
    @danielwelsh 4 роки тому +1

    Hi , excellent intruction. could you tell me if the 09 patriot is the same as the 08?

    • @mtlcarguy
      @mtlcarguy  4 роки тому +1

      Yes basically the same, Jeep (FCA) used this 2.4L World Engine in most of the Jeep Patriot from 2007.

  • @reddog907
    @reddog907 Рік тому

    Hi MTL I just changed the tensioner and idler pulleys as well as the serpentine belt, there is a problem the belt does not track on the idler pulleys one drifts to the right the other to the left, what I found is that on of the pulleys is bigger in diameter than the other , after the original installation it was very bad , so I switched the upper for the lower it is a bit better but less chance of the belt touching the engine , is there a reason for the different size and which one should be the upper and the other the lower. If you can help thank you

    • @mtlcarguy
      @mtlcarguy  Рік тому

      I think the upper pulley is 65mm outer diameter and the lower pulley is 70mm outer diameter. The difference in size was probably decided by the mechanical engineers to obtain a specific adjustment.

    • @reddog907
      @reddog907 Рік тому

      @@mtlcarguy Thank you so much.

  • @tic2394
    @tic2394 3 роки тому

    I would like to ask if there is a problem in turning individual pulleys once the old belt is out in order to inspect any play or worn out bushes or bearings. Is there any timing that may be affected?

    • @mtlcarguy
      @mtlcarguy  3 роки тому +1

      Only the harmonic balancer crankshaft pulley (no:6) is related to the timing chain but it cannot be checked simply by hand. The 3 small pulleys (no:5, 8 and 9) are only mounted on a bearing. The alternator pulley (no:3) has a a clutch system and is mounted with a press fit bearing. The alternator rotor shaft is also held with 2 other bearings. The alternator shaft can be rotated by hand without danger. The pulley for the power steering (no:1) and the one for the water pump (no:7) can be rotated to evaluate the bearings inside the assemblies . The A/C compressor clutch pulley (no:4) can also be spun to check the bearing when the A/C compressor clutch magnet is not engaged.

    • @tic2394
      @tic2394 3 роки тому

      @@mtlcarguy Thank you for the information. I'm working on mine tomorrow here in South Africa.

  • @m.w.h.9253
    @m.w.h.9253 3 роки тому

    This should be the same on a 2012 patriot 2.4 right?

  • @danielwelsh
    @danielwelsh 4 роки тому

    Hi, sorry to bother you but what size box wrench did you use

    • @blessedindarkskinned9250
      @blessedindarkskinned9250 3 роки тому

      My belt i got for my jeep was too small what do i do

    • @Hauudio
      @Hauudio 3 роки тому

      @@blessedindarkskinned9250 your small belt might be for your vehicle type with no A/C. Just try to exchange for a belt for type with A/C

  • @abdulxhebar7985
    @abdulxhebar7985 11 місяців тому

    Haw much longer must be the belt for this kind of engine 2.4 jeep patriot 2012 in (mm) please ?

    • @mtlcarguy
      @mtlcarguy  10 місяців тому

      I don't know, I have never measured the belt. Ask your local supplier.

    • @abdulxhebar7985
      @abdulxhebar7985 10 місяців тому +1

      @@mtlcarguy 2580mm and the code was 6pk 2580mm for those who dont know

  • @Hauudio
    @Hauudio 3 роки тому

    The tensioner would not turn from the top of the engine bay. All the pulleys are rotating when the engine is on. Any ideas to make easier?

    • @mtlcarguy
      @mtlcarguy  3 роки тому

      No!... I find it easy to release the tensioner from underneath and I never tried to do it from the top of the engine bay. Maybe some comments in Jeep Patriot forums could help you to do it from the top. Good luck with your search.

  • @kingwatut8357
    @kingwatut8357 Рік тому

    Can you tell me the size of the belt please mine broke and I don't know the size

    • @mtlcarguy
      @mtlcarguy  Рік тому +1

      A bit late to check my messages but I had no electricity for about 3 days because of the ice storm in the Montreal area. I did not keep any record of the part number or the size of it, but it was longer than an other version because of the air conditioning pulley. Your local auto parts service person should know about it.

    • @kingwatut8357
      @kingwatut8357 Рік тому

      @@mtlcarguy thanks I got the belt 😉👍

  • @amrindergill7218
    @amrindergill7218 3 роки тому +1

    My Jeep Patriot 07 belt is so tight it takes mechanic help to installation... it’s not that simple

  • @user-rl3kg1wq1d
    @user-rl3kg1wq1d 2 роки тому

    سلام عليكم رقم القايش كم

  • @Friitzxe
    @Friitzxe 3 роки тому

    This is a test to see if you will reply...