Correct method of threading a three thread overlock machine | Indian | Chinese | GN 1 | DC 21

[@sewingiscalling]

0:00:00
I will teach you today
0:00:02
Indian or Chinese
0:00:04
For the three thread overlock sewing machine
0:00:06
Threading method.
0:00:08
The way of threading is similar in both these models.
0:00:10
First, let's put the thread on the right side.
0:00:12
That is the thread that comes to the upper side of the fabric.
0:00:14
Put that thread in the upper looper on the right side.
0:00:20
First put the thread on the thread stand.
0:00:24
Second, the thread is put in the first hole of the tension plate.
0:00:28
The third one is put in the second hole of the tension plate.
0:00:34
For the fourth, Thread the hole in the blade guard arm.
0:00:38
For the fifth, the Thread is put between the two tension dishes.
0:00:44
For the sixth time, the Thread is put in the hole in the tension plate.
0:00:49
For the seventh time, thread the thread take up lever.
0:00:53
For the eighth time, the thread is put on the inner side of the Ugard.
0:00:58
For the ninth time, the thread is put on the front side of the Ugard.
0:01:03
For the tenth time, the thread is placed to come out from the inner side of the lower hole of the upper looper.
0:01:10
For the eleventh, the upper looper is threaded to enter from the outer side of the upper looper.
0:01:17
Leave the end of the thread about 20 cm long.
0:01:24
Now you are the Thread in the upper looper on the right.
0:01:30
Next, put the thread that comes to the needle.
0:01:32
A dc size 14 needle fits this machine.
0:01:36
First, the thread is put on the thread stand.
0:01:41
Second, it is put out from the hole on the inner side of the tension plate.
0:01:47
Thirdly, the two tension dishes are placed inside from the right side.
0:01:53
For the fourth, it is put out of the hole of the tension plate.
0:01:57
For the fifth time, Insert the thread into the hole in the needle bar arm
0:02:03
For the sixth time, the thread is released from the inside of the take-up lever.
0:02:09
For the seventh, the Thread the upper thread guard.
0:02:13
Eighth Put the thread on the left side of the needle bar tension
0:02:18
For the ninth time, Insert the thread from the front side of the needle.
0:02:23
Leave the end of the thread about 20 cm long
0:02:28
Next is the thread on the left.
0:02:30
Thread coming under the seam.
0:02:33
First put on the trade stand.
0:02:35
Second, it is put through the hole in the upper back cover.
0:02:39
Thirdly, put the flour through the hole in the bottom cover.
0:02:44
Fourth, the tension plate is put out from the inside of the hole.
0:02:48
For the fifth, the two tension dishes are placed inside from the upper side.
0:02:54
For the sixth, it is put out from the inner side of the tube in the housing
0:03:00
For the seventh , Put the thread on the thread guide at the back of the looper holder.
0:03:05
Many people forget to put this hook.
0:03:08
It must be put in the thread guard under the looper holder.
0:03:12
The thread is placed on the front side of this hook and when pulled back with the tweezer, it falls inside.
0:03:19
For the eighth time, the bottom hole of the lower looper is put out from the inside.
0:03:26
For the ninth time, the lower looper is placed from the outside to the inside of the upper hole.
0:03:32
Leave the end of the thread about 20 cm long.
0:03:38
let's put the thread on the right side.
0:03:42
That is the thread that comes to the upper side of the fabric.
0:03:47
put in the second hole of the tension plate.
0:03:52
Thread the hole in the blade guard arm.
0:03:58
Thread is put between the two tension dishes.
0:04:03
the Thread is put in the hole in the tension plate.
0:04:08
thread the thread take up lever.
0:04:13
the thread is put on the inner side of the Ugard.
0:04:17
the thread is put on the front side of the Ugard.
0:04:23
thread is placed to come out from the inner side of the lower hole of the upper looper.
0:04:27
the thread is put on the thread stand.
0:04:32
it is put out from the hole on the inner side of the tension plate.
0:04:37
the two tension dishes are placed inside from the right side.
0:04:42
it is put out of the hole of the tension plate.
0:04:47
Insert the thread into the hole in the needle bar arm
0:04:52
thread is released from the inside of the take-up lever.
0:04:58
the Thread the upper thread guard.
0:05:03
Put the thread on the left side of the needle bar tension
0:05:07
it is put through the hole in the upper back cover.
0:05:12
put the hole in the bottom cover.
0:05:22
the tension plate is put out from the inside of the hole.
0:05:27
the two tension dishes are placed inside from the upper side.
0:05:32
it is put out from the inner side of the tube in the housing.
0:05:37
Put the thread on the thread guide at the back of the looper holder.
0:05:42
the bottom hole of the lower looper is put out from the inside.
0:05:46
the lower looper is placed from the outside to the inside of the upper hole.