Відео

0:00:00 Household sewing machine 0:00:02 In any brand name 0:00:04 The needle to be used 0:00:06 The type is H A 0:00:08 Wrapped in paper sheets 0:00:10 Wrapped in lead sheets 0:00:12 It is in polythene packets 0:00:14 Do not buy low quality. 0:00:16 A recognized brand name 0:00:18 High quality needle 0:00:20 Try to buy. 0:00:22 It can be said as an example 0:00:24 Singer Original Needle. 0:00:26 Basically Singer originals 0:00:28 Can be divided into two types. 0:00:30 H A 2020. 0:00:32 H A 2045. 0:00:34 H A 2020 needles are made 0:00:36 Sew General Fabric. 0:00:38 H A 2045 needles are made 0:00:40 Stretch fabric, 0:00:42 knitted fabric, 0:00:44 soft fabric 0:00:46 Sew special fabrics like 0:00:48 The most important thing 0:00:50 is H A 2045 0:00:52 With a special needle 0:00:54 Ordinary cloth can be sewn. 0:00:56 H A 2045 is used 0:00:58 Any fabric can be sewn. 0:01:00 H A 2045 is 0:01:02 another name for the needle 0:01:04 H A ball point needles. 0:01:06 H A 2045 Needle tip 0:01:08 Round and smooth 0:01:10 Because it is produced 0:01:12 Does not damage fabric. 0:01:14 Stitches don't slip. 0:01:16 Heavy material sewing 0:01:18 Buy H A 2020 0:01:20 Needles. 0:01:22 You want to sew 0:01:24 ordinary cloth 0:01:26 Buy H A 2045 0:01:28 Needles. 0:01:30 H A 2020 in Ikatu 0:01:32 In the part that attaches 0:01:34 to the sewing machine 0:01:36 You can see a 0:01:38 red colored bar above. 0:01:40 H A 2045 in 0:01:42 In the part that attaches 0:01:44 to the sewing machine 0:01:46 You can see a 0:01:48 golden color bar on top. 0:01:50 More below that 0:01:52 You can see a color bar 0:01:54 By that color bar 0:01:56 The size of the needle 0:01:58 You can figure out what it is. 0:02:00 Size 9 needle color bar 0:02:02 Marked in green, 0:02:04 Size 11 needle color bar 0:02:06 Marked in bold, 0:02:08 Size 14 needle color bar 0:02:10 Marked in blue, 0:02:12 Size 16 needle color bar 0:02:14 Highlighted in purple, 0:02:16 Size 18 needle color bar 0:02:18 Marked in yellow, 0:02:20 Color bar on size 21 needle 0:02:22 It is marked in red 0:02:24 can see 0:02:26 Easy with these color strips 0:02:28 Needle type 0:02:30 Needle size 0:02:32 Can understand. 0:02:34 Use the needle 0:02:36 What is the size 0:02:38 Decides 0:02:40 In sewing material 0:02:42 According to the Tithnas. 0:02:44 The hardness of the material 0:02:46 Increasingly 0:02:48 A fat needle, 0:02:50 The hardness of the material 0:02:52 As it decreases 0:02:54 A thin needle 0:02:56 Need to use. 0:02:58 For example. 0:03:00 To sew embroidery 0:03:02 H A 2020 0:03:04 Size 9, size 11 or 0:03:06 If the fabric is too thick 0:03:08 A size 14 needle 0:03:10 can be used 0:03:12 Leather, Rexin, Curtain, Canvas, 0:03:14 sew things like 0:03:16 H A 2020 0:03:18 Size 18, size 21 0:03:20 can be used 0:03:22 For general use 0:03:24 H A 2045 0:03:26 Size 14 or size 16 0:03:28 Ball point 0:03:30 Needles can be used. 0:03:32 Stretch fabric, Soft fabric, Knitted fabric, T-shirt fabric 0:03:38 Especially sewing Even if it is produced 0:03:40 H A 2045 Needles Sew any fabric can be used

0:00:00 Many people have a problem 0:00:02 with clothing irons 0:00:04 getting dirt on their feet. 0:00:06 In that case,do not try to 0:00:08 scrape the foot using tools to 0:00:10 remove the dirt. 0:00:12 Paracetamol tablets available in 0:00:14 every home can be used to 0:00:16 remove dirt from remove dirt from 0:00:18 the feet under clothing irons. 0:00:20 After turning on the clothes iron and heating it well, 0:00:24 rub the paracetamol tablets 0:00:26 on the dirt stuck to 0:00:28 the bottom of the clothes iron. 0:00:30 Gradually rub the paracetamol tablets 0:00:32 from one side to the other side 0:00:34 When the paracetamol tablets 0:00:36 start to melt due to heat, 0:00:38 the dirt stuck to the 0:00:40 bottom of the clothes iron 0:00:42 also starts to melt and come off. 0:00:44 Wipe off the melted dirt 0:00:46 from time to time with a clean cloth. 0:00:48 By doing this several times, 0:00:50 you can clean your 0:00:52 cloth iron beautifully 0:00:54 like a new cloth iron. 0:00:56 Thanks for watching the video and 0:00:58 thanks again for subscribing

0:00:00 D C is the correct needle 0:00:02 to use for household or 0:00:04 industrial overlock sewing machines. 0:00:06 Use a D C ball point size 14 needle 0:00:08 if you are sewing a 0:00:10 regular soft fabric. 0:00:12 Check if the needle pack says 0:00:14 D C B P 14 or D C 14B. 0:00:16 B P or # B is indicated on 0:00:18 ball point needle packets. 0:00:20 To know more about the 0:00:22 types of needles, 0:00:24 watch the video 0:00:26 that introduces the 0:00:28 types of needles that 0:00:30 I uploaded earlier. 0:00:32 Sew very heavy material, 0:00:34 Use a size 16 or size 18 needle to 0:00:36 match the thickness of the fabric. 0:00:38 It is always acceptable to use 0:00:40 # 14 B needles when sewing on 0:00:42 overlock machines. 0:00:44 D C 14 B needle can sew any 0:00:46 fabric like stretch fabric, 0:00:48 soft thin fabric, 0:00:50 denim fabric, 0:00:52 handloom fabric. 0:00:54 When buying needles, 0:00:56 be sure to buy from a 0:00:58 high-quality brand name

0:00:00 In most industrial high speed sewing machines 0:00:02 There is a D B needle bar. 0:00:04 Some on industrial high speed sewing machines 0:00:06 a D P needle bar 0:00:08 It is installed in the factory. 0:00:10 Or later by a mechanic 0:00:12 D P A needle bar is installed. 0:00:14 They hope that 0:00:16 Heavy duty for sewing heavy material 0:00:18 Strong needle attachment. 0:00:20 D P needles are thicker than D B needles 0:00:22 D P has a needle bar, 0:00:24 D P Needle mounted 0:00:26 Also from a sewing machine 0:00:28 Soft fabric, like stretchy fabric 0:00:30 Any fabric can be sewn. 0:00:32 It needs to be done 0:00:34 D P # 14 B 0:00:36 Fitting a ballpoint needle. 0:00:38 Use a D P ball point size 14 needle 0:00:40 if you are sewing a regular soft fabric. 0:00:42 Check if the needle pack says 0:00:44 D P B P 14 or D P # 14 B. 0:00:46 B P or # B or B is indicated on 0:00:48 ball point needle packets. 0:00:50 To know more about the 0:00:52 types of needles, 0:00:54 watch the video that introduces the 0:00:56 types of needles that 0:00:58 I uploaded earlier. 0:01:00 Sew very heavy material, 0:01:02 Use a size 16 or size 18 or 0:01:04 size 21 or size 23 needle to 0:01:06 match the thickness of the fabric. 0:01:08 For an industrial high speed sewing machine 0:01:10 with a D P needle bar, 0:01:12 D P # 14 B can be approved for 0:01:14 normal use, 0:01:16 except in special cases. 0:01:18 When buying needles, 0:01:20 be sure to buy from a 0:01:22 high-quality brand name

0:00:00 Household sewing machine 0:00:02 Under many brand names 0:00:04 You know that there is something to buy in the market. 0:00:09 Singer, Brother, Necchi, Elna, Bernina, Toyota, Mitsubishi, Husqvarna, Newhome, Pfaff, juki, Janome, Usha, Jaguar 0:00:14 It can be said as an example. 0:00:16 Whatever the brand. 0:00:18 Even a normal machine. 0:00:20 Even a zigzag machine. 0:00:22 Should be used for household machines 0:00:24 Needle Type H / A . 0:00:26 H / A needles 0:00:28 Basically there are two types. 0:00:30 One H/A 2020 0:00:32 And H / A 2045. 0:00:34 H / A 2020 Needle Needle for general sewing. 0:00:39 According to the count of sewing cloth 0:00:41 Available in sizes 9, 11, 14, 16, 18, 21. 0:00:43 H/A 2045 is a ballpoint needle. 0:00:47 Ballpoint needles are also called wrangler needles by some. 0:00:51 Others call it wetlook needles. 0:00:55 They are used to sew stretchy fabrics, soft fabrics. 0:00:59 According to the count of sewing cloth 0:01:04 Can be bought in size 9, 11, 14, 16 0:01:09 H / A 2045 with ballpoint needles 0:01:15 When sewing stretchy fabric, soft fabric 0:01:21 You can stop fabric damage. 0:01:27 You can also stop the slip without sewing the seam. 0:01:32 H / A 2045 ballpoint needles can also sew normal fabrics. 0:01:38 When buying needles for the sewing machine used at home 0:01:43 Choosing H/A 2045 Ballpoint Needles is important. 0:01:49 Without buying inferior fake needles 0:01:55 Be careful to choose a quality brand.

0:00:10 Remove the hand wheel bushing 0:00:12 Remove the hand wheel bushing with the 0:00:14 teplon washer behind the hand wheel bushing 0:00:25 Removing the Zig Zag Dish Holder 0:00:27 Zig zag dish track removal 0:00:29 The dish track can be removed 0:00:31 by loosening the screw on the back 0:00:33 of the sewing machine body 0:00:35 There is another way 0:00:37 Remove the dish holder upper circle clip 0:00:39 The dish tack can be removed except for the shaft 0:00:41 Carefully remove the circle clips 0:00:43 Circle clips can break 0:00:45 If thrown away, it may not be found 0:00:58 Next remove the vibrating bracket adjustment pin 0:01:45 Remove the needle bar, foot bar, take up lever 0:01:51 Loosen the main shaft bevel gear screw using a 3mm Allen key 0:01:53 Loosen screws FEEDING BEARING (ASENTIC WHEEL) 0:02:47 Loosening the main wheel and feeding bearing can be a bit difficult 0:03:14 Don't hit, don't knock 0:03:16 Slowly and carefully push the main shaft out 0:03:34 Twist and pull out 0:03:38 The fidng bearing came loose 0:03:40 The big teplon washer came off 0:03:56 Took out the broken main shaft bevel gear 0:03:59 Install the new main shaft bevel gear now 0:05:51 Reinstall the teplon washer 0:06:02 Refitting the Ascentic Feeding Bearing 0:06:05 There are two cut marks on both sides of the main shaft 0:06:09 Like the thread take up lever mounting screw on the left side of the shaft 0:06:13 Tighten the bevel gear screws parallel to the cut mark when the shaft is rotated and raised. 0:06:17 Tighten the assentic bearing pin to the cut mark on the opposite side 0:06:21 Let me explain more 0:06:23 When the takeup lever mounting screws are turned to the side you can see, the bevel gear screws are pressed to the cut mark parallel to it, and the ascentic feeding bearing is pressed to the cut mark on the opposite side. 0:06:45 When the takeup lever mounting screws are turned to the side you can see, the bevel gear screws are pressed to the cut mark parallel to it, and the ascentic feeding bearing is pressed to the cut mark on the opposite side. 0:07:05 Do not knock, hit any parts 0:07:26 Retighten all screws as they were before removal 0:18:30 Needle bar, take-up lever, vibrating bucket installation 0:23:40 Oiling 0:24:50 Thank you for subscribing, clicking the bell icon, commenting, sharing the video and watching the video so far.

0:00:00 do you have only one sewing machine right now while you are sewing the 0:00:05 soft fabric want to sew leather rexine curtains bags and another heavy materials 0:00:13 currently you are using the machine with DB thin needles and not strong feed dog and plate you 0:00:20 cannot sew leather and rexine with the existing needle bar and feed dog larger dp5 needles should 0:00:28 be used heavy feed dog has to be installed I will teach you today how to do that 0:00:46 when changing a DP needle bar leather Point LR needles can also be used 0:00:54 for sewing leather rexine Oxford material LR needles must be used 0:01:01 this is a job you can do alone I present step-by-step watch the video carefully 0:01:21 the method of removing the DP needle bar currently attached to the machine 0:01:27 unscrew and remove the DB needle bar 0:01:48 installs ADP needle bar 0:02:27 remove the h-type needle plate [Music] foreign 0:02:41 type feed dog is removed 0:03:07 b-type heavy needle plate and feed dog are 0:03:35 b-type heavy needle plate and feed dog it can get stuck then the feed dog is taken forward 0:03:41 and backward by the peg marked in yellow Drive b-type heavy needle plate and feed 0:03:48 dog it can get stuck then the feed dog is taken up and down by the peg marked in green 0:04:03 before adjusting the feed dog adjust the Stitch Gap to the 0:04:07 maximum distance from the Stitch regulator [Music] 0:04:22 when viewed from the inside of the carrier to the bottom level 0:04:26 inside the hole through which the needle passes 0:04:30 the threading hole of the needle that has come down to the maximum should be parallel 0:04:59 the threading hole of the needle that has come down to the maximum should be 0:05:05 parallel when viewed from the inside of the carrier to the bottom level inside 0:05:09 the hole through which the needle passes 0:05:13 the needle threading hole is placed at the 0:05:26 lower level of the carrier and the needle bar is tightened oh 0:05:46 this is how to adjust the needle bar correctly when the needle bar goes up and down and up again 0:05:54 the point of the carrier should be at the bottom of the curve above the needle threading hole 0:06:07 together the carrier point should be approached without touching the 0:06:13 needle the carrier point should be very close to the bottom of the needle curve 0:06:18 but don't let the needle touch the carrier that is the right way to adjust career timing 0:06:24 adjust the carrier timing and tighten the two or three carrier screws well 0:07:26 after installing ADP needle bar dp5 needles all sizes dp5lr needle all sizes size 19 20 21 22 0:07:44 23 db5lr needle size 19 20 21 22 23 F2 to 5 LR needle pf5lr needle all sizes size 19 20 21 22 0:08:05 23 DB5 needles pf5lr needle all sizes size 19 20 0:08:13 21 22 23 DB5 needles all needles named above can be used 0:09:21 you should especially remember this fact DB5 18s 16 14 12 11 9 db5lr 18 16 14 12 11 9 F2 to 5 LR 18 0:09:42 16 14 12 11 9 and type of 17 longer needles in all sizes should never be fixed foreign 0:10:27 because a very heavy feed dog is not installed the soft fabric material will not be damaged 0:10:42 by changing adp5 ballpoint size 14 needle you can sew soft Fabrics 0:10:50 I tell you once again by changing adp5 ballpoint size 14 needle you can sew stretchy Fabrics 0:11:21 subscribe my UA-cam channel click the Bell icon if you have any problem ask in a comment 0:11:29 share this video so others can see it 0:11:58 I am now going to sew four strands of Oxford material you can sew 0:12:03 without breaking the needle without breaking the thread without slipping 0:12:08 without loosening the thread and without jamming the machine 0:12:33 I will come back soon to make a video that is important to you

0:00:00 I will teach you today 0:00:02 Indian or Chinese 0:00:04 For the three thread overlock sewing machine 0:00:06 Threading method. 0:00:08 The way of threading is similar in both these models. 0:00:10 First, let's put the thread on the right side. 0:00:12 That is the thread that comes to the upper side of the fabric. 0:00:14 Put that thread in the upper looper on the right side. 0:00:20 First put the thread on the thread stand. 0:00:24 Second, the thread is put in the first hole of the tension plate. 0:00:28 The third one is put in the second hole of the tension plate. 0:00:34 For the fourth, Thread the hole in the blade guard arm. 0:00:38 For the fifth, the Thread is put between the two tension dishes. 0:00:44 For the sixth time, the Thread is put in the hole in the tension plate. 0:00:49 For the seventh time, thread the thread take up lever. 0:00:53 For the eighth time, the thread is put on the inner side of the Ugard. 0:00:58 For the ninth time, the thread is put on the front side of the Ugard. 0:01:03 For the tenth time, the thread is placed to come out from the inner side of the lower hole of the upper looper. 0:01:10 For the eleventh, the upper looper is threaded to enter from the outer side of the upper looper. 0:01:17 Leave the end of the thread about 20 cm long. 0:01:24 Now you are the Thread in the upper looper on the right. 0:01:30 Next, put the thread that comes to the needle. 0:01:32 A dc size 14 needle fits this machine. 0:01:36 First, the thread is put on the thread stand. 0:01:41 Second, it is put out from the hole on the inner side of the tension plate. 0:01:47 Thirdly, the two tension dishes are placed inside from the right side. 0:01:53 For the fourth, it is put out of the hole of the tension plate. 0:01:57 For the fifth time, Insert the thread into the hole in the needle bar arm 0:02:03 For the sixth time, the thread is released from the inside of the take-up lever. 0:02:09 For the seventh, the Thread the upper thread guard. 0:02:13 Eighth Put the thread on the left side of the needle bar tension 0:02:18 For the ninth time, Insert the thread from the front side of the needle. 0:02:23 Leave the end of the thread about 20 cm long 0:02:28 Next is the thread on the left. 0:02:30 Thread coming under the seam. 0:02:33 First put on the trade stand. 0:02:35 Second, it is put through the hole in the upper back cover. 0:02:39 Thirdly, put the flour through the hole in the bottom cover. 0:02:44 Fourth, the tension plate is put out from the inside of the hole. 0:02:48 For the fifth, the two tension dishes are placed inside from the upper side. 0:02:54 For the sixth, it is put out from the inner side of the tube in the housing 0:03:00 For the seventh , Put the thread on the thread guide at the back of the looper holder. 0:03:05 Many people forget to put this hook. 0:03:08 It must be put in the thread guard under the looper holder. 0:03:12 The thread is placed on the front side of this hook and when pulled back with the tweezer, it falls inside. 0:03:19 For the eighth time, the bottom hole of the lower looper is put out from the inside. 0:03:26 For the ninth time, the lower looper is placed from the outside to the inside of the upper hole. 0:03:32 Leave the end of the thread about 20 cm long. 0:03:38 let's put the thread on the right side. 0:03:42 That is the thread that comes to the upper side of the fabric. 0:03:47 put in the second hole of the tension plate. 0:03:52 Thread the hole in the blade guard arm. 0:03:58 Thread is put between the two tension dishes. 0:04:03 the Thread is put in the hole in the tension plate. 0:04:08 thread the thread take up lever. 0:04:13 the thread is put on the inner side of the Ugard. 0:04:17 the thread is put on the front side of the Ugard. 0:04:23 thread is placed to come out from the inner side of the lower hole of the upper looper. 0:04:27 the thread is put on the thread stand. 0:04:32 it is put out from the hole on the inner side of the tension plate. 0:04:37 the two tension dishes are placed inside from the right side. 0:04:42 it is put out of the hole of the tension plate. 0:04:47 Insert the thread into the hole in the needle bar arm 0:04:52 thread is released from the inside of the take-up lever. 0:04:58 the Thread the upper thread guard. 0:05:03 Put the thread on the left side of the needle bar tension 0:05:07 it is put through the hole in the upper back cover. 0:05:12 put the hole in the bottom cover. 0:05:22 the tension plate is put out from the inside of the hole. 0:05:27 the two tension dishes are placed inside from the upper side. 0:05:32 it is put out from the inner side of the tube in the housing. 0:05:37 Put the thread on the thread guide at the back of the looper holder. 0:05:42 the bottom hole of the lower looper is put out from the inside. 0:05:46 the lower looper is placed from the outside to the inside of the upper hole.

0:00:00 most of the time the sewing machine does not sew not a problem with the sewing machine it's not 0:00:05 the wrong type of needle the reason for not sewing is using a lowquality needle what are 0:00:10 the characteristics of lowquality needles what are the characteristics of highquality needles I 0:00:15 will teach you in this video watch the video till the end let me show you a bad needle First Look 0:00:21 carefully at the characteristics of a lowquality needle it looks like the metal the needle is made 0:00:26 of is bad it looks like electroplated or powdercoated look there is no quality on 0:00:31 the edges of the needle there is no finish in the thread hole needle eye above the needle eye the 0:00:37 place where the thread catching position where the needle is long in Needle carf is no finish on the 0:00:44 threading side of the needle in the cut from top to bottom there is no finish with a clear mind 0:00:49 and wide open eyes you can easily pick up cheap needles I hope now you can get some idea about 0:00:54 bad needles I will now show you a high quality needle look at this you can see it when you 0:01:00 look at it it has a good quality brilliant finish it is made of high quality metal like 0:01:05 pure steel so it shines well look there is good quality on the edges of the needle there is good 0:01:11 finish in the thread hole needle eye above the needle eye where the thread catches the point 0:01:16 where the needle protrudes inward needle calf is a good finish on the threading side of the 0:01:21 needle in the cut from top to bottom there is good finish the thread does not slip because 0:01:25 it gives the shape it should have in a needle the hole of the needle the edges of the needle 0:01:30 the carf of the needle must be smooth so that the thread does not break a good needle feels smooth 0:01:35 in the hand it looks beautiful even when you look at it with your naked eye compare this good needle 0:01:40 with the bad needle I showed earlier in this video good needles are expensive inferior needles are 0:01:46 cheap but using inferior needles won't give you any profit because inferior needles break sewing 0:01:51 threads break and they don't sew properly even if the price is high buy a good needle another thing 0:01:57 to be careful about when buying needles is the pack of the needles do not take inferior needles 0:02:02 wrapped in a lead sheet and placed in a paper pack good needles are marketed with high quality 0:02:07 packaging choose a needle with a reputable brand because there are many fake products of reputable 0:02:12 brands in the market be careful that you are buying the original needle we can distinguish good 0:02:17 needles and inferior needles by the finish of the needle and the finish of the packet pay special 0:02:23 attention to the pack a good thing is not put on the market in inferior packaging the other thing 0:02:28 is the price you don't get a good product cheap I hope that the things I said in this video will be 0:02:33 useful to you at some point thanks for watching the video and thanks again for subscribing

0:00:18 See how to remove parts from rows. 0:00:25 Removing the tension cup 0:00:27 Unscrew and remove the tension nut. 0:00:29 Removing the tension cut washer 0:00:45 Removing the tension spring 0:00:48 Tension plus minus cup is removed. 0:00:51 Remove the tension pressure plate, three tension dishes, and take-up spring. 0:01:56 Place the pressure plate on top of the tension dish and slide it all into the take-up spring. 0:02:02 Insert the tension stud correctly. 0:02:12 Plus Minus Cup Mounting 0:03:15 Tension spring installation 0:03:16 Tension cut washer installation 0:03:20 Tension nut installation 0:05:10 If the complete tension post comes off the sewing machine, tighten the pin shown here.

0:00:00 One of my clients wanted to paint her black sewing machine with this beautiful acrylic paint. 0:00:05 When I was doing that work, my two daughters also wanted to join in on the work. 0:00:10 Even though working with paint is dangerous, I had to involve the children because of their curiosity. 0:00:15 They are children older than 13 0:00:17 We need to safely allow children to pursue their passions. 0:00:50 All parts of the sewing machine are removed. 0:01:30 All parts of the sewing machine are removed. 0:01:45 Applying paint remover Scraping off old paint 0:02:00 Clean with sandpaper using water. 0:02:35 Applying primer brown 0:02:50 Applying Pillar Gray 0:03:20 Applying red paint 0:03:35 Brand name and flower design stickers 0:04:00 Clear lacquer is used to apply brand name and floral design stickers. 0:04:05 Removing paper with brand name and floral design stickers printed on it using water 0:05:05 Apply a clear lacquer top coat over the sticker. 0:05:10 Reinstalling the removed parts

0:00:05 All parts are removed. 0:00:30 All parts are removed. 0:00:48 All parts are removed. 0:01:05 All parts are removed. 0:01:10 Scraping off old paint 0:01:45 Scraping off old paint 0:01:50 Cleaning with sandpaper 0:02:17 Applying primer brown 0:02:24 Applying filler gray 0:02:50 Applying black paint 0:03:12 Brand names and stickers are applied. 0:03:25 You need to apply a clear lacquer top coat over the sticker. 0:03:45 Reinstalling the removed parts 0:05:50 Reinstalling the removed parts 0:06:10 Reinstalling the removed parts 0:06:28 I'm sewing well now. 0:06:32 The video is not over, you can see the best parts now. 0:06:50 Changing the stand wheel 0:07:15 Machine table is being renewed. 0:07:20 Machine table is being renewed. 0:08:20 Now the work is almost done, now is the time for you to have the best things. 0:08:30 Now the work is almost done, now is the time for you to have the best things. 0:08:40 It cost approximately $150 to complete this work. 0:10:00 Thank you for watching the video, please subscribe and share.

0:00:00 One of my clients wanted to paint her black sewing machine with this beautiful acrylic paint. 0:00:05 When I was doing that work, my two daughters also wanted to join in on the work. 0:00:10 Even though working with paint is dangerous, I had to involve the children because of their curiosity. 0:00:15 They are children older than 13 0:00:17 We need to safely allow children to pursue their passions. 0:00:50 All parts of the sewing machine are removed. 0:01:30 All parts of the sewing machine are removed. 0:01:45 Applying paint remover Scraping off old paint 0:02:00 Clean with sandpaper using water. 0:02:35 Applying primer brown 0:02:50 Applying Pillar Gray 0:03:20 Applying red paint 0:03:35 Brand name and flower design stickers 0:04:00 Clear lacquer is used to apply brand name and floral design stickers. 0:04:05 Removing paper with brand name and floral design stickers printed on it using water 0:05:05 Apply a clear lacquer top coat over the sticker. 0:05:10 Reinstalling the removed parts

0:00:00 One of my clients wanted to paint her black sewing machine with this beautiful acrylic paint. 0:00:05 When I was doing that work, my two daughters also wanted to join in on the work. 0:00:10 Even though working with paint is dangerous, I had to involve the children because of their curiosity. 0:00:15 They are children older than 13 0:00:17 We need to safely allow children to pursue their passions. 0:00:50 All parts of the sewing machine are removed. 0:01:30 All parts of the sewing machine are removed. 0:01:45 Applying paint remover Scraping off old paint 0:02:00 Clean with sandpaper using water. 0:02:35 Applying primer brown 0:02:50 Applying Pillar Gray 0:03:20 Applying red paint 0:03:35 Brand name and flower design stickers 0:04:00 Clear lacquer is used to apply brand name and floral design stickers. 0:04:05 Removing paper with brand name and floral design stickers printed on it using water 0:05:05 Apply a clear lacquer top coat over the sticker. 0:05:10 Reinstalling the removed parts

0:00:00 Remove the face plate and top cover 0:00:02 Remove the stop motion wheel and hand wheel 0:00:30 Loosen the feed regulator lever screw 0:00:32 Remove the handwheel bush and toplon washer 0:00:56 Unscrew and remove the dish track (dish holder). 0:01:37 Unscrew and remove the feed regulator 0:02:37 Unscrew and remove the gear wheel 0:02:39 Loosen the Ascentic pedaling wheel screws 0:02:59 Loosen the main shaft wheel screw 0:03:11 Unscrew and remove the vibrating ascentic shaft and vibrating bracket 0:03:32 It will be convenient for you to remember the location of the two cut marks on the upper end of the vibrating bracket ascentic shaft. 0:03:38 Unscrew and remove the vibrating bracket and the Asentic shaft 0:04:28 Unscrew and remove the needle bar 0:04:33 Unscrew and remove the threadtakeup lever 0:05:25 Loosen the bevel gear screws and the eccentric bearing screws 0:05:30 Pull out the main shaft and remove the broken bevel gear. 0:05:53 Insert the new main shaft wheel into the machine. 0:05:55 Reinstall all previously removed parts as they were before. 0:07:57 Reinstall all previously removed parts as they were before. 0:08:18 Rotate the main shaft so that the threaded take-up lever mounting screws are facing up. 0:08:28 Tighten the bevel gear pin into the cut mark parallel to the threaded take-up lever mounting screw. 0:08:38 Install the eccentric bearing screw on the cut mark opposite the cut mark where the bevel gear screw is installed. 0:08:48 If the two screws on the bevel gear and the eccentric bearing are installed incorrectly, the fabric will be pushed backwards instead of forwards. 0:08:58 Install DishTack now. 0:09:00 Now install the feed regulator. 0:09:30 If you have any further questions, please watch the videos uploaded regarding this repair and this sewing machine. 0:09:40 Install the thread take-up lever and needle bar and vibrating bucket. 0:09:45 Watch the uploaded videos on needle bar timing and needle bar position adjustment. 0:11:45 Thank you for watching the video, please subscribe to the channel.

0:00:05 Removing all parts 0:00:50 Removing all parts 0:01:08 Applying paint remover 0:01:17 Scraping off old paint 0:01:20 Applying paint remover 0:01:49 Scraping off old paint 0:02:05 Cleaning with sandpaper 0:02:17 Applying primer brown 0:02:50 Applying filler gray 0:03:15 Smoothing with sandpaper 0:03:25 Applying silver color 0:03:40 Applying acrylic red color 0:04:10 Brand name sticker affixing 0:04:15 Clear lacquer is used to stick stickers. 0:04:35 Removing the paper on the sticker with water 0:05:00 Applying clear lacquer 0:05:26 Reinstalling parts 0:06:30 Even though this is a black machine, the client wanted to paint it this beautiful red.

0:00:00 Remove the face plate and top cover 0:00:02 Remove the stop motion wheel and hand wheel 0:00:30 Loosen the feed regulator lever screw 0:00:32 Remove the handwheel bush and toplon washer 0:00:56 Unscrew and remove the dish track (dish holder). 0:01:37 Unscrew and remove the feed regulator 0:02:37 Unscrew and remove the gear wheel 0:02:39 Loosen the Ascentic pedaling wheel screws 0:02:59 Loosen the main shaft wheel screw 0:03:11 Unscrew and remove the vibrating ascentic shaft and vibrating bracket 0:03:32 It will be convenient for you to remember the location of the two cut marks on the upper end of the vibrating bracket ascentic shaft. 0:03:38 Unscrew and remove the vibrating bracket and the Asentic shaft 0:04:28 Unscrew and remove the needle bar 0:04:33 Unscrew and remove the threadtakeup lever 0:05:25 Loosen the bevel gear screws and the eccentric bearing screws 0:05:30 Pull out the main shaft and remove the broken bevel gear. 0:05:53 Insert the new main shaft wheel into the machine. 0:05:55 Reinstall all previously removed parts as they were before. 0:07:57 Reinstall all previously removed parts as they were before. 0:08:18 Rotate the main shaft so that the threaded take-up lever mounting screws are facing up. 0:08:28 Tighten the bevel gear pin into the cut mark parallel to the threaded take-up lever mounting screw. 0:08:38 Install the eccentric bearing screw on the cut mark opposite the cut mark where the bevel gear screw is installed. 0:08:48 If the two screws on the bevel gear and the eccentric bearing are installed incorrectly, the fabric will be pushed backwards instead of forwards. 0:08:58 Install DishTack now. 0:09:00 Now install the feed regulator. 0:09:30 If you have any further questions, please watch the videos uploaded regarding this repair and this sewing machine. 0:09:40 Install the thread take-up lever and needle bar and vibrating bucket. 0:09:45 Watch the uploaded videos on needle bar timing and needle bar position adjustment. 0:11:45 Thank you for watching the video, please subscribe to the channel.

00:15 First, attach the feed dog guard to the machine to prevent the needle from hitting it. 00:36 Turn the feed drop knob and lower the feed dog to the level of the needle plate. 00:46 Bring the regulator to the zero position and tighten the screw. 00:58 Loosen the presser bar screws and lift the presser bar up a little 01:05 Fix the buttonhole attachment 01:10 The pressure bar screw should be tightened so that there is the same distance between the regular foot and the needle plate when the foot lifter is raised. 01:25 The buttonhole attachment should be attached straight so that the needle does not get stuck. 01:35 Be sure to leave enough space for the fabric to easily pass through the buttonhole attachment and feed dog guard. 01:45 Check carefully to see if the foot on the buttonhole attachment is working properly and if the needle is sticking to it. 03:00 If the needle rubs or hits the fabric when the buttonholer attachment is pushed to the left and right, loosen the pressure bar screw and turn it to the desired direction. 03:30 After attaching the buttonhole attachment to the sewing machine, do not push the machine forward and lift it, as it may hit the machine table and break. 03:57 A good quality buttonhole attachment has two screws where it attaches to the sewing machine 04:11 while a bad quality buttonhole attachment has only one screw where it attaches to the sewing machine 04:21 That is one way to distinguish between good quality and bad quality 04:31 A free special needle clamp is included with the good quality buttonhole attachment. 04:41 Cheap quality buttonhole attachment packages do not include special needle clamps. 04:51 The butterfly nut on a regular needle clamp often comes loose when installing a buttonhole attachment. 05:01 The special needle clamp is very strong and has a small round head screw instead of a butterfly nut. 05:36 Two screws come with the buttonhole attachment to attach it. 05:41 A strong needle clamp with a special headless nut is coming 05:46 This is a bad quality button hole attachment, so I can't see the features I mentioned earlier. 05:50 Watch the video until the end as it discusses very valuable topics from time to time. 05:59 Watch the video until the end as it discusses very valuable topics from time to time. 06:10 Watch the video until the end as it discusses very valuable topics from time to time. 07:20 H A 2045 size 14 needles, ideal for general use 07:30 Buy Singer Original Needles with Gold Top 09:06 (gap between the seams) (distance between two stitches) Stitch length is adjusted here 09:36 This is where you adjust the length of the buttonhole according to the size of the button. 10:10 (Cutting Point) This is where you adjust the space between the two seams on either side of the buttonhole (where the buttonhole is cut). 10:50 This is where you increase or decrease the width of the zigzag stitch on the left and right sides of the buttonhole. 11:46 This is where you adjust the length of the buttonhole according to the size of the button. 11:55 (Cutting Point) This is where you adjust the space between the two seams on either side of the buttonhole (where the buttonhole is cut). 12:03 This is where you increase or decrease the width of the zigzag stitch on the left and right sides of the buttonhole. 12:11 (gap between the seams) (distance between two stitches) Stitch length is adjusted here 12:34 Do not start sewing the buttonhole from the top or bottom, turn this butterfly nut and start sewing from the middle of the buttonhole. 12:51 Before you start sewing the buttonhole, turn this butterfly nut and center it where you want to start sewing the buttonhole. 15:15 When you start sewing, start in the middle. 15:25 When you start sewing from the top and bottom edges, the thread can get tangled and cause sewing errors. 16:00 Don't put a buttonhole attachment on an old, faulty machine. 16:10 I need to attach the buttonhole attachment to a sewing machine that works perfectly. 16:20 It's a stupid, stupid idea to attach a buttonholer attachment to a machine that can't even sew a regular stitch properly. 17:00 Never lift or push a sewing machine with a buttonholer attachment forward or upward for any reason. 17:10 You will damage the buttonholer attachment if you do that. 17:20 There are two different types of buttonhole attachments for domestic (household) sewing machines and high-feed (industrial) sewing machines. 17:40 Before purchasing the buttonhole attachment, make sure it is suitable for the job you are trying to do and your sewing machine. 20:59 When buying a buttonhole attachment, try not to fall for a fake product. Instead, you should buy a good one that is priced according to the product quality, rather than looking for a cheap buttonhole attachment. 21:30 Check if the buttonholer you are buying has these features: 21:54 Check to see if there are two screws where the pressure bar is attached. 22:09 As a solution to the butterfly nut loosening due to the buttonholer lever hitting the needle clamp 22:49 There should be a special needle clamp with a round-headed nut. 23:11 There should be a long square-shaped feed dog Guard (Cover) 23:45 If the buttonholer attachment you buy has those features, it is an original product.

Thankyou so much. This video was not easy to find but I'm so happy finally. Now I know what I did wrong and I'll correct my mistake tomorrow morning🙏🏾. Thank you so much for your help.

Is is machine mein swimming board per a rahi hai zigzag banate ho

I have the same problem .

thred tention kit kha milega pl, reply

I Just want to say thank you for uploading this video. My old sewing machine wasn't working yesterday and I tried to fix it, this video helped me to open the otter shell.

Как называется мелодия.?

What kind of lubricant is safe for the plastic gears inside?

Thank you so much

Thank you so much.

Hi , good evening from Nigeria. I just bought this sewing machine Singer 288 fairly used. However, the tension unit detached from the sucket this evening, including the rod that holds all parts in place. How do I replace the rod to enable me assemble the parts?

If anyone is interested to sell his or her machine padel I will gladly buy it

Can anyone help me

Singer fatura xl 400 I lost my padel Where can I buy another

What was the issue if u don’t mind helping

Worthless

Where are your place

Interesting but no way possible for me.

Hey my singer xl 400 stop sewing and bleep can u tell me wat is wrong

Aoa kya ap bta skty hain singer k ye gear wheel kahan se buy kr skty plzz reply......

Where can repaire this machine .please tell me.from homagama

👍

شغل كلش نظيف احسنت

I restored this model a while ago. Look at it and see what you think. ua-cam.com/video/oC142IWznRI/v-deo.html

what oil did you use to clean the inside of the arm of the embroidery machine?

Good restoration

Can you tell me what you use before applying the stickers on machine.

Very cool trade.😊

Niyamai thanks 🙏 🙏 🙏 🙏

Pak, jika mesin tidak mau jalan hanya 1 setikan setelah itu lampu nya merah dan berhenti, kendalanya apa ya pak?

How do I get xl400 software for my new hp laptop windows 10

Thanks for very detail tutorial. Please inform part number of belt at 38:20

Please repair my singer future sowing embroidery machine...CE-200