Just finished the modeling, took me few days was doing about an 1/2hours a day with 0.5x speed. Learnt a lot from this tutorial will be very helpful for my final year of architecture degree. Thanks alot
Great tutorial as always! Tips(in case you don't know): Hold down Alt + click and drag to select object regardless of your cursor is pointing on another object, surface, etc...
@@AdamArchh i learned it but it was not doing like you did then i exploded the curves and did tweencurves and worked! Would love it if you showed us a tutorial of a building modelling from exterior and also interior floors and windows and doors....i am new to rhino and basically am learning from you! thank you so much
@@AdamArchh can you consider tutorial of the ramps of the proyect edificio de estacionamientos en grenoble by poisay architectes the proyect is on archdaily please
The part when i create the window, i can't split them like u (i mean i can't choose a full poly surface like u, they're split into 2 parts) Do u know how to fix it?
Hello Adam, hope you are well, when i select the lines from the outer part in wireframe mode and top view with ctrl+shift, i do select as well the faces. Is there any presettings i should know? thanks for your videos ;)
@@noemihenrytorres9149 Okay, let's choose a different method. Open the Filter menu at the bottom of the screen and select Edges only. So it doesn't select faces.
Thansk for your support, yes, changing filter works, i'm quite new in Rhino. by the way, when i try to stich vertices (min. 8.30), it appears "Defects are marked with dots and defective components are selected". i looked on the internet, but i don't find the way..
@@AdamArchh oh sorry let me describe more in details, when you draw a line or polyline, you hover the mouse near edges of a surface where it appear something like "near, quad, int, perp,..." my concern is in your vid you have like"projected quad, projected perp,..." like it coordinates along that surface. How can you do that ?
Just finished the modeling, took me few days was doing about an 1/2hours a day with 0.5x speed. Learnt a lot from this tutorial will be very helpful for my final year of architecture degree. Thanks alot
Yes samee, will be very helpful for my final year thesis project 🙌
@@The-Celestial Is the thesis about a youtube video?
@@photogramistic no it's an architectural design project
You never stop to suprise me great work
Thank you. I'm glad it worked for you
me perdí apenas pasados 2 minutos, pero volveré por ti, cuando este al level de esto
Great tutorial as always! Tips(in case you don't know): Hold down Alt + click and drag to select object regardless of your cursor is pointing on another object, surface, etc...
Thank you.
Thank you. What second are you talking about?
Congratulations , very nice work 👌
Excellent video!
Thank you
Thanks Adem, I will try this one too
Thank you too. Good luck.
Great tutorial as always,well done
Thank you Nasser.
Great work!
Thank you Emin.
Excellent work ❤️
Thank you.
Amazing modeling and rendering.
Thank you.
Designed and rendered by Of.Studio
Amazing work I think v ray plugins use for lighting
Amazing
Thank you
Great job buddy, keep it up. You could make a video explaining how you did the render and what programs you use.
Thank you. Fabrice, Soon
Nice work
Hello, I'm having problem with the tween curves tool in 12:53 .....i did the same thing but all i am getting are curves outside of shape.
Hi, can't you do the Tween Curve command?
@@AdamArchh i learned it but it was not doing like you did then i exploded the curves and did tweencurves and worked! Would love it if you showed us a tutorial of a building modelling from exterior and also interior floors and windows and doors....i am new to rhino and basically am learning from you! thank you so much
Thank you. Ok I will do soon.
Im having the same problem too , when i do the tween curve it just form out of shape .. how do i fix this ?
1:58 why i can't select only the array line instead of select all line inside the second circle? by Shfit + ctrl selection
In wireframe mode while holding down ctrl shift. select them without pressing the edges by enclosing them in a window.
@@AdamArchh thx for the quick reply, i try the wireframe mode selection but instead of line I also selected the face automatically.
That's what happened when I was doing it too. Make the selection a little closer to the center. or switch to shaded mode and wipe surfaces one by one
@@AdamArchh thxxx! I learn a lot
Great!!!!!!
Thank you.
Hey i want to ask. in 5:43 your rendered background is black , how i can change it like that ?
Also in 11:34 i can't create loft , i already select both curve but nothing happened
Alos on 13:41 , i can only delete the bottom part .. how do i fix this ?
@@mmoonbiiyou select the curves after you use loft command . Or you can just type loft and then select curves one by one .
Love your tuts. But want to learn how you superimposed your renders to a world photo please.
The render is not for me. I got the image from Archdaily. However, I will be making Render videos soon.
Those are some beautiful renders at the end, could you please make a tutorial only for them?
I just modeled. The render is not mine.
How can you make the sections and 2d floor plans from this 3d model
Instead of pressing the object, keep it pressed to frame it.
@@AdamArchh can you consider tutorial of the ramps of the proyect edificio de estacionamientos en grenoble by poisay architectes the proyect is on archdaily please
Great video can I ask do you use maya in your workflow at all thanks
Thank you Muhammad but I don’t use Maya.
you are amazing, keep it up
Thank you
Amazing!
Thank you
where i find subd tools tab in rhino 6
Subd only for Rhino 7.
Thank you
Thank you too.
The part when i create the window, i can't split them like u (i mean i can't choose a full poly surface like u, they're split into 2 parts)
Do u know how to fix it?
Merge srf , if it doesn't work "Srf seam" command
Hello Adam, hope you are well, when i select the lines from the outer part in wireframe mode and top view with ctrl+shift, i do select as well the faces. Is there any presettings i should know? thanks for your videos ;)
Hi thanks. You may be missing a small detail. Create the selection window from left to right, not right to left.
Can you send me a video from instagram DM?
@@AdamArchh thanks a lot for your quick answer. Look min. 5, you do right to left and just select edges. however thanks for all ;)
@@noemihenrytorres9149 Okay, let's choose a different method. Open the Filter menu at the bottom of the screen and select Edges only. So it doesn't select faces.
Thansk for your support, yes, changing filter works, i'm quite new in Rhino. by the way, when i try to stich vertices (min. 8.30), it appears "Defects are marked with dots and defective components are selected". i looked on the internet, but i don't find the way..
Legend
wow 💚
Good
Thank you
So good
Thank you
❤❤❤❤❤❤❤❤
holy fuck man, nice finding you!!!
Love your tutorials, but how long it takes to master Rhino?
I guess it will take less than 1 year.
Great Vids for me as a student. Its help alots. Btw how can you osnap or choose "projected Quad" as I can only choose "quad"
Sorry I can't understand you. But we will definitely have a follower who can answer you.
@@AdamArchh oh sorry let me describe more in details, when you draw a line or polyline, you hover the mouse near edges of a surface where it appear something like "near, quad, int, perp,..." my concern is in your vid you have like"projected quad, projected perp,..." like it coordinates along that surface. How can you do that ?
I think the problem you are having is related to the project command. In the lower middle part of the screen, there is the Project command. use it.
Okay but how do you make a window when the top and bottom are not symmetrical and at an angle?
If it weren't symmetrical, we would've gotten over that too. Nothing is impossible on this channel.
Like your voice
Thank you
Tell me what material can be used for this complex solution?
I love you❤ dude
is rhino better than sketchup rn?
We don't know this. But we love Rhino
Definitely better!
Great
😯😯😯😯😍😍😍😍😍😍
hello friend, do you have a rhino course?
Hi, We don’t have a course.
Perfect
I Love You 😄😄😍😍
nice work please reload the 3d model
Thank you. Ok
Try download again.
@@AdamArchh thanks
We wanna hear your voice dude
Thank you Jim, but my English is not good.
کاش زیرنویس داشت چقدخوب بود
12:52 i get a form outside the curves with the Tweencurves command. Why?
same problem, you can use extract isocurve and just click the midpoint