GFB Blow Off Valve Review And Sound Test On JB4 Tuned 2021 Kia Forte Gt!!!

Поділитися
Вставка
  • Опубліковано 18 лис 2024
  • In today's video we will be talking about the GFB blow off valve for my 2021 Kia Forte GT. sound clips included at the end of the video. please let us know what you think in the comments and let us know what else you would like to see. #kia #kiaforte #blowoffvalve #jb4 #cars #diyprojects

КОМЕНТАРІ • 51

  • @Cederick-g7y
    @Cederick-g7y 9 місяців тому +1

    I have a 2021 Kia forte Gt the air filter intake you will get more power rather then keep the stock air filter box on and if you upgrade to a racing oil catch, you will get more power as well It’ll sound much more crazier, especially now that you installed the blow off valve.

    • @954Film
      @954Film  8 місяців тому

      I am definitely going to be doing this soon.

    • @Cederick-g7y
      @Cederick-g7y 8 місяців тому +1

      @@954Film my next buy is going to be a front strut bar for handling and I found out a shift throttlebody response is really good too. It’ll help with delay when you hit the gas check it out on UA-cam 😤

    • @954Film
      @954Film  8 місяців тому +1

      @@Cederick-g7y I just put a front sway bar on that and the upgraded motor bushings are the best mods I have gotten for the car

    • @954Film
      @954Film  8 місяців тому

      Strut bar not sway bar sorry

    • @Cederick-g7y
      @Cederick-g7y 8 місяців тому

      @@954Film where did you buy it I’ve been looking around on Amazon but can’t find one that will fit

  • @DJSLANKMAN
    @DJSLANKMAN 8 місяців тому +1

    You put it on yourself? Want to get this BOV but never have i done any work on a car like that.

    • @954Film
      @954Film  8 місяців тому +1

      Yea I put it on myself it’s not that hard to do you do have to do it from the bottom of the car tho so you need a jack

    • @SuppositionalBox
      @SuppositionalBox 8 місяців тому

      @@954Film Apparently, you only need to remove the air intake and you can get down in there from the top. Not sure as I have yet to install one on mine but I've read of others doing it that way.

    • @954Film
      @954Film  8 місяців тому

      @@SuppositionalBox I tryed doing it that way and personally I thought it was easier to get to from the bottom once you get the car up and all the plastics removed

    • @DJSLANKMAN
      @DJSLANKMAN 4 місяці тому

      @@954Film Right on. Gonna deff get this next. Just put on a takeda CAI and a MBRP exhaust. Running a BPV delete right now but im hoping the BOV will add more turbo noise

    • @954Film
      @954Film  4 місяці тому +1

      @@DJSLANKMAN it will add a lot more turbo noise trust me

  • @Jeffe4506
    @Jeffe4506 2 місяці тому +1

    Where’d you get the air filter!? I cannot find a kn anywhere!

    • @954Film
      @954Film  2 місяці тому +1

      Hope this helps.
      www.knfilters.com/air-filters/kia/forte?srsltid=AfmBOoo5id9klnP5YAifHN9EYC0e24COwvhTHcf3YnubIe7ogqb0aSIq

    • @Jeffe4506
      @Jeffe4506 2 місяці тому

      @@954Film ok so it doesn’t have to be for the gt it can be for regular as long as it fits?

    • @954Film
      @954Film  2 місяці тому

      @@Jeffe4506 no it has to be the drop in k&n for the forte gt the one from the volester n also fits

    • @Jeffe4506
      @Jeffe4506 2 місяці тому

      @@954Film oh ok. The link you sent me takes me right to the 2L sedan forte not gt or veloster n. But I’ll check that out

    • @Jeffe4506
      @Jeffe4506 2 місяці тому

      Is there a more direct link or even a pic? I really desire this filter and I cannot find it. I cannot even find one for veloster n. The year I need is 2021

  • @SuppositionalBox
    @SuppositionalBox 8 місяців тому

    What kind of mods did you do to the exhaust system? Sounds a lot louder than mine so I have to assume you removed the resonator at the very least

    • @954Film
      @954Film  8 місяців тому

      Yea I removed resonator and 2nd cat I am gonna get a downpipe soon

  • @evilresident5201
    @evilresident5201 2 місяці тому

    i have the same GFB blow off valve, but I'm finding in a real pain to tighten the nut near the bov solenoid at the bottom, while working from underneath.. Did you take everything off from above( Air box, intake, blow off solenoid, intercooler piping and (including then the pipe that holds the BOV ), or did you work from underneath.?

    • @954Film
      @954Film  2 місяці тому

      I always found it easiest to work from underneath however it was never easy to get to that bov

    • @evilresident5201
      @evilresident5201 2 місяці тому

      @@954FilmI'm finding the nut underneath the solenoid infuriating to tighten. did you just the allen key provided or another tool?

    • @954Film
      @954Film  2 місяці тому

      @@evilresident5201 I just one half turn at a time tightened it with the provided Alan key it was painful

  • @Burgher1605
    @Burgher1605 4 місяці тому

    Which check valve are you using for the catch can? I have a ADDW1 catch can but it didn’t come with a check valve.

    • @954Film
      @954Film  4 місяці тому +1

      I am just using a check valve I got at advanced auto parts.

    • @Burgher1605
      @Burgher1605 4 місяці тому

      @@954Film sounds good. I’ll just check for something that flows at low pressure but still stops flow the other way.

  • @briandebnam6889
    @briandebnam6889 9 місяців тому

    Have you had any cel issues? Are you running full atmospheric vent, or split?

    • @954Film
      @954Film  9 місяців тому

      no i have not and i am running full vent

  • @elmo6145
    @elmo6145 9 місяців тому +1

    Is that thing blowing to the atmosphere? Im thinking of buying for my 20 gt this sounds fucking sick!

    • @954Film
      @954Film  9 місяців тому

      Yea it vents out to the atmosphere and this one has the trumpet on it to make a little more noise

    • @954Film
      @954Film  9 місяців тому

      It’s definitely a good modification it’s loud as can be

    • @elmo6145
      @elmo6145 9 місяців тому

      @@954Film sick I'm probably going with the gfb the sound is amazing to hear

    • @trenellsmith9057
      @trenellsmith9057 8 місяців тому

      I have a 2018 Elantra Sport, I like the DCT Farts, you running cat and resonator delete?

    • @954Film
      @954Film  8 місяців тому

      @@trenellsmith9057 Yesir I still have the rear muffler and the stock downpipes

  • @LUBObe
    @LUBObe 5 місяців тому

    What is the engine? 1.6 TGDI?
    In Bulgaria we don't have Forte GT but Proceed GT and it's with the 1.6 TGDI.
    Are you sure you're not over/under boosting with full atmoshpere?

    • @954Film
      @954Film  5 місяців тому +1

      Yea the car has the 1.6 in it. I watch my boost on the jb4 app and have all the fail safes setup incase of over boosting

    • @LUBObe
      @LUBObe 5 місяців тому

      @@954Film My car is under warranty, so no modifications are allowed...
      I'm wondering if I should install the bov cuz if the turbo breaks, it won't be replaced under warranty due to the bov.

  • @9Koopa
    @9Koopa 7 місяців тому

    where is the link??

    • @954Film
      @954Film  7 місяців тому

      www.pandamotorworks.com/collections/forte-gt/products/gfb-hybrid-tms-dual-outlet-valve

  • @ronburgundy4375
    @ronburgundy4375 6 місяців тому +1

    Car needs to be under load for you to hear it

    • @patricklucas1011
      @patricklucas1011 Місяць тому

      The car was under load I was doing full throttle pulls😂😂 did you watch the vid?