1998 Isuzu Trooper Snorkel Mod Part 3- FINAL

Поділитися
Вставка
  • Опубліковано 15 жов 2024
  • The final video of a modification to my snorkel. I sealed the system with RTV and installed an Apollo inline air filter. I also removed the OE air box and went straight to the snorkel inlet with 4 inch silicone hose.

КОМЕНТАРІ • 21

  • @f4x4fabrication9
    @f4x4fabrication9 3 роки тому +2

    Thanks mate you help me a lot to install my snorkel

    • @robbo6460
      @robbo6460  3 роки тому +1

      Your welcome. Thanks for the kind words pal.

  • @Mac58058
    @Mac58058 7 місяців тому +1

    What do you mean siliconed? Like you squirted silicone on all the connections before tightening the clamps?

    • @robbo6460
      @robbo6460  7 місяців тому

      Put a bead of silicone RTV inside each of the rubber and plastic connections. Then tighten up the clamps.

  • @alejandroalbertohernandezm6631
    @alejandroalbertohernandezm6631 5 років тому +2

    Hermosa quedo la camioneta me gusta mucho el diseño grasias por los videos

    • @robbo6460
      @robbo6460  5 років тому

      Thank you Sir.

    • @robbo6460
      @robbo6460  5 років тому

      Gracias por mirar, siempre estoy trabajando en mi Trooper. Mis hijos lo llamaron Shrek. Es un gran ogro verde.

    • @alejandroalbertohernandezm6631
      @alejandroalbertohernandezm6631 5 років тому +1

      I also have a trooper I do not make any changes but if I like how you have yours is very nice I always watch your videos

    • @robbo6460
      @robbo6460  5 років тому

      Gracias

  • @TJackSurvival
    @TJackSurvival 3 роки тому +1

    Kool

  • @thomasstedman6449
    @thomasstedman6449 3 роки тому +2

    I'm a newbie to this, so pardon my dumb question. But where is the filter? And how hard is it to change the air intake filter.

    • @robbo6460
      @robbo6460  3 роки тому +1

      My filter is inside the silver housing. It's a K&N so it's reusable for a long time. You need to open the housing to change or clean the air filter.

  • @TheRoach84
    @TheRoach84 2 роки тому

    Did you have to tune it for the Apollo?

    • @robbo6460
      @robbo6460  2 роки тому

      No I didn't. I probably could because Shrek gets 10-11mpg maximum. Which sucks with 4 dollar gas

  • @sam.buchwald
    @sam.buchwald 4 роки тому

    Hey mate, awesome work on it! Been thinking of doing something similar on my Trooper. Any chance you have a parts list?

    • @robbo6460
      @robbo6460  4 роки тому +2

      Thanks. I don't have a specific list but sourced everything from eBay and Amazon. If you need specifics, I can go over my accounts and look up purchases I made. The connection to the snorkel was not plug and play as I needed to cut a 4 inch by 12 inch down to transition to the angle. It's not rocket science but a bit tricky.

    • @Mac58058
      @Mac58058 7 місяців тому

      @@robbo6460would be awesome to have a parts list with links!!!!

    • @robbo6460
      @robbo6460  7 місяців тому

      @@Mac58058 half of the stuff is no longer available on eBay. I worked my way to the 45 degree coming out the fender and finding that was a real bitch. Sorry pal.

  • @alejandroalbertohernandezm6631
    @alejandroalbertohernandezm6631 5 років тому +1

    Donde puedo conseguir el esnorque??? Donde lo puedo compar

    • @robbo6460
      @robbo6460  5 років тому

      rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F262384254605

    • @robbo6460
      @robbo6460  5 років тому

      Lo compré en eBay desde Australia