Dude! Ive been a professional drone pilot for years, I fly some of the biggest drones out there, and this tiny little thing gave me fits trying to bind it after i replaced the FC... this video got me back in the saddle! THANK YOU
I was having trouble binding a quad on the BetaFPV Lite Radio and your video helped me. Thanks for doing that summary the second time. I know some may say those watching can just rewind, but somehow the way you said it made it super clear. Just wanted to leave you a comment that your video helped me. Keep up the good work.
Thank you for posting this video. After 2 hours of trying to bind it to the controller I came across your video. Best instructions for newbies. All other videos I came across don't explain the binding process in detail.
Thank you Sir! I'm not great with PCs but thanks to this video I ordered a full betafpv kit with this controller. I love I can get into fpv without losing my mind over my PC
hey, thanks, mine was bound out of the box. But have a couple of questions. -And please note that the meteor 75 lite I got is a bit different than the one you show. I don't have any buttons, but I do have a micro USB socket on the FC board. Hoping I can get into betaflight with this, but have found zero info. Ah ha, Just figured out I have the F4 1S AIO board not the Lite 1S which is discontinued, but not exactly -mine is a brownish board and slightly different layout than the F4 board shown on the betafpv site. -hmmm . 1. first -the goggles and your glasses -Mine fit inside without the side pieces but need higher magnification to read data -what do you do? 2. flight - Small, I mean small touches to the throttle (in Level-s mode) change it from on the ground running to smacking off the ceiling. Can lowering rates fix this? 3. I see no access to OSD to change Tx power, rates etc. hoping the micro plug will solve this. Flicking SC killed the video, -rebooting goggles and channel search brought it to a different channel and displayed -LAYOUT- menu. None of the Tx controls work to change anything.
After lots of troubleshooting, I realized I'm in the exact same situation you are. We have a different board than he is showing in this video. It seems like our board does not support 200 mW vtx? Also, beta flight doesn't seem to recognize this board, so I think maybe it's running silverware?
It's funny that even though we have a micro USB plug, I can't seem to get it to connect to beta flight. Their website seems to suggest this FC board comes flashed with betaflight, but I can't get it to recognize. And I have other drones that I connect to the same computer with the same port, so I know my setup is working. Have you had any success at all connecting into your PC? I did find that our OSD menu has an advanced screen with more options available. Still no 200 MW vtx, but at least it's something.
@@wmcewa01 I'm waiting to hear from Beta. Lots of holidays in the way. I'd have to start from the ground up (literally) with betaflight. I guess i need to do that anyway. I just want to fly this f*cker.
I ordered this kit aug 30 from beta's site, with 7-10 days shipping. Go it it 3 weeks later, and it's been dead since. I have 4 emails into support@betafpv. I realize there was a lot of holidays in between but this is not looking good.
@@salvor1 do you have a ticket open at betafpv.freshdesk.com? I have my ticket open there, and I've gotten at least one update (although that one update was useless).
Just got my Starter kit from BetaFPV and been crashing the drone left and right with my 9 years old. Been searching all night last night and couldn't find anything about the switches and different fly mode, not even on their website or the manual it came with. Thank you for covering all the different mode and what the switches does.
Buddy RC thanks! While I have you here, is it possible to tune it so it’s not so responsive? Also I feel the drone tend to lean toward the left a bit, is there a way to calibrate? Sorry that I dragged you into more questions, was not planned :D
@@BuddyRC Hey so I figured out how to get the new flight controller into binding mode, but slight problem. The drone comes in d16 mode, and the controller is in d8 from the last drone. How do I flip it back to d16? I tried holding down the bind button the same way and nothing would happen. It would just keep blinking three times. I have tried to go into betaflight to put the flight controller itself into d8 mode, as it says it can on the website, but I can't figure out how to make it work. Any tips?
Update: I figured out why it wasn't working! A red wire had crossed over to where the bind button would press down, so nothing was happening. I tried multiple ways to figure out the binding method, as the website doesn't mention anything, and I think i managed to do it. Ironically, the flight controller somehow ended up going back into d8 mode, so the controller thing ended up being a waste of time. Anyways, I managed to get it paired I think, the light blue light flashes and it beeps when the controller is connected. I can;t get it to react though, it says its in turtle mode, and the screen keeps fizzing out. It's very weird. Any advice would be great!
@@remiiqbal9790 Mine is also having this issue. It connected right out of the box for the first two flights but after a mild collision with the wall the motors turned off on their own and now it will not connect. Hoping it's a software issue as the crash was very mild.
Have you had any instability with the video channels? I keep losing video during operation despite drone, goggles and controller being within arms reach, and when I turn it all back after having everything working the video channel seems to have been lost. Also, for me, the labels for the channels are different between the goggles and the drone, and setting the frequencies the same (e.g. 5820 M) on both doesn't work, so something is out of sync. Did you see anything like that?
The VTX on these have been overheating, causing the drop no matter how close or far you are to the drone. People have been getting the F4 1S AIO Flight controller to replace it.
I'm having trouble binding this. Some videos are just plugging a battery in and turning on the controller and pressing bind. I've tried that with no luck and I have tried your way. When I try your way I never get the 3 flashes on the controller. Frustrated and ready to return it. Any help? Suggestions? Thanks
It's a painful process for sure. Only compounded by the fact some come direct from the factory not bound. Ensure the throttle stick is all the way down when you go through the process of ensuring you're in D8 mode. If you aren't in D8 mode the quad won't bind. If you follow this video exactly and it doesn't work shoot betafpv a support ticket to see if they can help. The steps in this video have been what has helped many. If a replacement or return is needed at the bottom of the buddyrc.com you'll see 'warranty and returns' just follow that and it's pretty straight forward.
The first suggestion is to always verify the channel on the goggle and quad match. It can be one channel off and look like it's good until you start flying and you'll lose video after a few feet.
VTX overheating, I have made sure that everything is binded correctly and will fly in directly in front of me for about 10 seconds and it loses image. When in the cold weather it works fine.
Hello, I need some help, somehow my set is a little different. I don’t know if it’s older or newer. But in the OSD is super limited I can’t set anything about smartaudio or rates etc. Would be super greatful if someone could help me out a little bit.
@@erickjordali7787 Yes there is a micro USB port on the bottom of the PCB. Sadly I still havent found out how to set it up poperly. Maybe by connecting to Betaflight one could change these settings.But since Im new to the Hobby I dont want to ruin something. In case you find anything it would be awesome if you let me know aswell :)
I just got mine 1 h ago and I'm flying on LEVEL mode at home. It's a bit too fast for me. I've tried to lower the rates from 800 to 60 but drone is still super fast ;) Maybe rates affects only ACRO mode but I'm scared to turn it on at home :P I'm not sure what else can be adjusted. Please let me know if you will find some solution.
UPDATE after a month with Advanced Kit 2: I burned Mosfet transistors at one motor while trying acro at home... I don't really know why it burned - drone just hit the wall and fell down without geting anything into props. Most probably due to broken frame, it was looking fine and props where free to move but probably when I "touched" the wall frame touched the props and it was enought to burn mosfets. In the end I just bought new FC with BetaFlight and USB port. I resoldered VTX and changed frame. I must say that it's AMAZING how many things you can configure in BetaFlight. I can switch my quad from super fast to super slow just by switching profiles on the radio! Now I'm waiting for Tango 2 with multiprotocol module as my RadioLite2 started to produce "shaky" stick positions. Looks like green potenciometers are shitty - I bended them a bit, it helped for a while but problem returned :/
Hi, great video! Got my kit through last week. I can’t seem to connect the video to the goggles though... it will connect after searching but then drop out a minute or two later even if left right next to each other. I’ve tried going in and setting the channel as B1 then setting the goggles to B1 but then it doesn’t receive any video at all. I’ve also bumped it up to 200mw but still no change. Any advice would be great!
Thanks for the video! It is very helpful. I've ordered Advanced Kit 2 a week ago and looks like Betafpv have improved the instruction. Now it contains proper information regarding binding the quad (process is slightly different from the shown because flight controller has changed) but there is no single word how to change protocol on the literadio (and the remote controller is not in the DP8 by default). BTW, here is the updated binding instruction: - power on the quad - press the bind button on the quad - power on literadio - press the bind button on the back of the literadio - wait the signal from the quad Sorry for my english :)
Dale Hendrix honestly I don't think that would happen. I would reach out to betafpv through their support system and see if they have heard of this happening before. Personally I haven't seen or heard of any issues like that before. Did it just start happening? Still able to fly but just only acro mode?
When you said flip ALL switches got me thinking. Tried again and at first only arm switch worked but after several various switch flips it started working...or maybe I was just high, anyway keep the tutorials coming for fools like me
Dale Hendrix hahaha that's the thing with this setup is acro switch overrides everything. So it's funky but once you realize it's the switch combinations that change flight modes I just flip them til it shows me what I want 😂
Just got this kit and its great. Been flying for about 20 minutes now and it is beginning to drift when i am not turning it. Is there a way for me to recalibrate it to make it not drift away?
Great video! Just bought this kit; my OSD looks completely different...and only has two options (CONFIG/LAYOUT). how do I get into the more advanced settings like you do in the video (smart audio, etc.) ?
@@coffeemug612 they have been updated, go to config, starter, and do left left right right with the right stick and you can go back and change vtx freq
I bought this kit on black friday deal and I have a completely different OSD options. Can anyone tell me if they changed the board with worse vtx power? I can't change vtx power to 200mW so I have only 25mW?
@@00powerstrokin I don't think even the OSD has trim options available. I'm relatively new to this but there's two things I can suggest: 1. Make sure you start the drone on a completely level service. I believe the gyro calibrates on drone startup. (so plug the battery in, place it on a level surface, and wait for those second set of beeps) 2. Mine seems to start off drifting, but then recovers quickly. After one or two seconds of having to make manual adjustments myself the quad seems to stabilize.
Fantastic video buddy. Just bought this kit and couldn't get it to do a thing. Came unbound and I drained both batteries trying to figure it out. Until I found your video. Just waiting for them to recharge to try your setup. I've already changed the transmitter to D8 as per your instructions. The provided instructions are rubbish. I thought I'd been sent a duff drone and would have to send it back to China or where ever BETAFPV are based. Big big thanks again for a great video.
Same from me, but worse: There was a loose joint inside my Literadio 2 right out of the box. I did everything as you instructed, but the transmitter wouldn't go into binding mode. Tracked down the problem joint and fixed it - now everything works, but I wouldn't have even started looking for it if I hadn't found your video. Thanks man!
I had a crash in some mulch and didn’t disarm fast enough ( I think) and have this same issue. I suspect I burned the ESC, which I have no idea how to replace. All 4 motors are fine since I can re-route the one that won’t arm into a different port and it turns on fine. Was having a blast with this drone till that happened. I guess a new FC board is the only fix?
@@tommustang02 Yep, after a few emails with Betafpv customer service, they said to me that the FC is dead and they send me a new one (my kit is still under warranty).
great video, helped me understand more, but i tried to change to D8 mode just like in the video following exact steps and it won't do anything, it just turns on (directly to blue after green), no flashing in between or anything. the only flashing i get is the normal "binding" flash. anyone has the same issue?
Hey man, yes. I had the same issue. I opened the controller up to see if everything was connected properly, and found a loose joint on one of the boards. I touched that up and suddenly it all worked perfectly. I still can't fly for sh!t, but at least everything else is fine now.
@@theangryginger7582 TBH, I can't remember off-hand. But when I opened the transmitter, there was a loose wire and just one solder joint that it clearly should've been connected to. My advice: Just open it carefully and take a look. Definitely worth it...
@@waldovanderwaal I did and I didn't see anything. However when I pressed the bind button directly on the circuit board it started working again. Weird
I have just recieved my kit a few days ago. I have enjoyed it for a solid 20 minutes... then something has happend and I have no or extremely weak video signal. So I am unable to fly the drone as I see nothing the moment the drone is further than a meter away. It is really really frustrating. I have no Idea what might be the problem.
TJ please help me i really need help ! i got sent the transmitter with the throttle on the right. i just cant adapt and have no idea how to change it to mode 2! can you please make a video of this as there are no tutorials showing how to swap the throttlles over.
Thanks for the video. Do you have any idea how to adjust RSSI not to use Aux4 (SD switch)? Our BetaFPV lite radio 2 has Aux4 as a switch and I'd like to assign it to something in betaflight, but Aux4 (SD switch) is being occupied by RSSI for one particular quad using an XM+ receiver. I have no issues with other quads. Just this one GEPRC Skip 3 HD where it wants to use Aux4 as RSSI instead of letting me assign it to my desired function.
Hi! I am having troubles while binding my Cetus lite brushed. I did everything you said and it keeps flashing in green. I updated both drone and LiteRadio 2 SE firmware but the problem continues. Any idea on how to get the drone recognize the controller?
Thank you for the excellent video! My radio lite 2 has troubles with potentiometers for the second time (values are jumping). I'm going to buy RC Radiomaster radio with frsky D8. Will I be able to bind drone from the kit to RC radio like radiomaster? Or will it only work with Radiolite 2 controller. Thank you very much for your answer!.
@@BuddyRC Thanks! I already fly with it its a heaven compared to radio lite 2 :D is there any Expo set up inside silverware board or are all axis linear? I can set rates from OSD, but im not sure about expo or any non linear adjustment. Thanks Buddy RC!
Haven’t received my kit yet, but I believe this video will be helpful in the near future. More videos please, especially about using the controller with a simulation 😊
Hi. Thaks. I have some problem to reconnect the quad meteor75 to remote controler. I push the button on my quad, green light starts to blink, push bind button on rc but nothing happens :( Any ideas?
New learning opportunist here. Does it need to be binded the reason the controls have a "make no sence" effect on quad? So ALL need to be bineded when new? Thank you
Hi man just got this drone for Christmas. It worked well for a week and a half but now the vtx is lagging. The goggles loose the image every 30 seconds. And the range is shity compared to what it did before. I don’t know if it’s the antennas on the goggles or the antenna on the drone. I don’t know what to do please help me.🙏🙏
My kit shipped just before Christmas and arrived yesterday. Tx and drone not bound out of box. Tried BETAFPV,’s manual instructions as well as this video to rebind - no luck. The bind button on the drone is in a different location than shown in your video, so I am wondering if it is a different version. I have written to the manufacturer for help, so waiting. Pretty frustrating. Different kind of experience (yes, and price) compared with DJI products!
Yeah man! The kit has changed since this video. They have sent me an updated kit I am just waiting for the postal service to decide they want to deliver it. I will be uploading new videos once it arrives and I have time to get my hands on it.
@@BuddyRC FINALLY I got the updated kit to bind, but I had been trying so many different things, I am not 100% sure what exactly made it work. One thing is certain: I had changed the Tx to “3 red blinks” on start up (as described in your video) before I succeeded. With the Tx already powered on, I believe the magic happened when I then powered on the drone letting it power up properly for a while, THEN pressed the bind button. Then power off drone, then back on again:) :). Have not heard back from BETAFPV yet. Your videos are very well explained, so if you figure out how this version should bind exactly, another video would surely help lots of people.
hi, what is D16 in Betalite radio 2, is it the one red blink or the 2 red blink? I am trying to bind it a Beta95X whoop V2 Frsky FCC...Thanks in advance
Great video! I'm older and not really an advanced flyer. To get Stability mode, B is flipped to which position? Considering that I already have a set of Eachine goggles and I fly in Stability mode, just messing around in my yard, which quad and controller would you recommend? I want real sticks on real gimbals, not the thumb sticks and plastic gimbals. Thanks.
Thank you so much for this, really helpfull. I am wondering if you have been able to have the meteor75 showing up in Betaflight. The OSD setting are pretty basics and I cannot really change anything ?? I tried multiple usb cables,.. but not showing in Betaflight Thanks in advance, Christophe
I have only one button on mine on the right side. Anyway took several tries to get it to bind, but it now spins like a top counterclockwise?? All 4 props are spinning in the right direction. Any advice? Thanks.
This video is very helpful! My transmitter disconnected and since won't flash when trying to get it back into frsky d8. Do you know what the issue might be?
Hey this might sound odd but my switches don't seem to work right at all...I bound it to my tiny hawk freestyle 2....the sb switch seems to be all the way up I put my throttle all the way down then one switch down it beeps then one more down the props go. No clue what the rest do
This was super helpful. I finally got it bound. However, it won’t arm and fly. The switches change the mode as expected, but the SA switch does nothing and the props don’t spin. Any advice? Any idea where to find answers?
Were you able to find a solution? If the OSD is showing the switches working my first step would be to unplug and plug in so it's level as the battery is plugged in. Verify that the drone is not in turtle mode.
Hey thanks for your vid- I’m a complete newbie. I ordered the betafpv advanced 2 kit and I’m trying to put this in binding mode and I’m getting solid blue light. It’s not changing colors when I hold bind with throttle down. Any tips?
Hi thank you for the video. I tried and tried with the supplied manual many times, and was close to returning the product to BetaFPV. I have succeeded in binding it and the goggles working also, so thank you for that. Although I don't seem to have the ability to yaw?!? Do you have any advice on this? It would be much appreciated. Thanks
I can’t get mine in acro mode. I have tried all switches. It will at times say it is in acro mode when I have the switch in safe but once I throw it out of safe it will go into one of the other modes.
Hi BuddyRC! I had an issue... I messed up my sons BetaFPV Meteor75 Lite, due to unfamiliarity with Silverware. I went into the OSD and accidently changed the Rx protocol from D8 to SBUS and now I am stuck there and i can't get back to d8...Any ideas to help me get my son flying again would be great!
This will probably take some close focus but... support.betafpv.com/hc/en-us/articles/900005303906-How-to-Flash-Firmware-of-Lite-FC . This is a link to reset the drone and give it firmware. Could possibly mess up the drone but worth a shot.
I was asking about blue screen a few weeks ago. It happened again but this time I had sd card in and blue screen is just DVR loading. On that subject, how about tutorial on how to use. I can see I have recordings but wanted to know if I wanted to erase. Couldn't figure out how to play
Hi bud. I bought the advanced kit. I CAN'T record at all. I changed my mini SD card and nothing. I hear like static and black screen. Any idea plz i can use the help. Thx
THANKS TO YOUR VIDEO I WAS ABLE TO FLY THE BETAFPV FPV DRONE THE SAME AS THE ONE YOU POSTED, THANKS AGAIN, SORRY THE ENGLISH IS UNFORTUNATELY TRANSLATED I SPEAK ONLY ITALIAN, HOWEVER THANKS AGAIN.
Flight controller is broken, they discontinued production. They offer to buy a new model of controller. But, I don't understand wich i should choose frsky d16 fcc or frsky d16 lbt???
Hi BiddyRC, how do you bind the LiteRadio2 that comes with this kit with the Beta85X V2? I got the kit plus the additional bigger drone to use it with Insta360 GO. Thanks.
A kid broke the radio so we replaced it and are trying to bind the new controller to the old drone. I follow your steps but when I click the bind button on the bottom of the controller the drone doesn't blink. I think I am in D8 mode but it's hard to tell. If you count the red flashes before you hear the sound when you turn the controller on or after you hear the sound. As I power the controller on it flashed three times, but after it flashes 3x and then you hear the sound, the flashes are super hard to count. So I can't tell which flashes I count, before or after the beep. Can BETAfpv please put up some training videos on their channel?
hi buddy, i like the way you present binding of betafpv advance kit 2 and honestly i was able to bind my quad just base on your video, it really helps me a lot... do you have a video tutorial also that bind the lite radio transmitter 2 to Beta 95x whoop v2 frsky fcc, please help and thanks in advance
Jesus christ...thank you. Thank you. Thanks you. Its amazing how you purchase this but there isnt any basic set up instructions I do have a question if you dont mind. I got everything set up as per ur video however the drone doesnt take off. 😢 Is there anything else needed to be done to get airborne? Any suggestions would be appreciated
total newbie to the fpv drone I never used goggles before and I just see a blank blue screen when I hit the search button so any help on how to connect the goggles would be helpful everything else seems ok got the receiver to bind but don't know where to go from here cant see anything through the goggles.
Thank you for the video dude! It´s very good! Anyways I buy this kit advanced 2 and the bottom of my drone is diferent, only have a button and another plate that I don´t know what it is... The OSD drone is different too. I only have CONFIG LAYOUT SAVE and EXIT. In CONFIG only have RX on/off, LED on/off and AUDIO on/off.... I don´t understand nothing and I only could fly my drone twice because the OSD say me that the voltage is 9V, suddenly dissapear de ODS info or other strange things... I only want reset the configuration but I dont know why hahahaha a complety dissaster...
@@BuddyRC Thanks for your reply! I can give you some info about this now. At the end was a fault FC in my meteor 75 lite that didn´t allow me change the options... They send me a new FC but now the problem is the transmitter. The gimbals don't work as they should and looking for on UA-cam is a very common problem that happens after 2 weeks of use normally... I don't know if I was unlucky or it's a bad kit. Regards and thank you
this might sound like a dumb question, for anyone who can answer id appreciate it. i have a spektrum DXe that came with my aeroscout. can i bind that with the cetus? do they speak the same language? i have goggles too that i know will work with the drone but i never messed with the transmitter.
If you’ve got the newer FC that only has one bind button, you don’t need to press it to enter bind mode. Just wait for the yellow/amber flashing lights on the fc then press bind on the controller. The fc bind button changes the receiver mode - check it’s D8 in the OSD
Hi! I just received my kit and when I push the bind button at the same time that starting the controller, the light turns red. Is is normal, am I doing something wrong?
The bind button on mine is in a different place, on the left of the controller board, at the level where the top left arm is attached to the frame. And pressing it as I plug it doesn’t get the green LED flashing.... the only advice so far from my seller was to try following the steps in this video so completely stuck....
Super neat video. I have the starter kit, in which they give you the same, except the drone is slightly different (the 65s). Unfortunately or so I believe, I got mine with the bayang protocol (not sure if I can do somtheing about that now). I do not really know if the drone has any technical issue, but the range is a complete joke. I get like 30-40 feet outside. Not to mention, when I use the DVR function on the goggles, the video which it records is of a supreme sh*t quality. It does not even match the mediocre quality which I get live, unless the drone is within 3 to 5 meters, the video just turns into white bars. And also there is no sound to that recording. There is only some scrambled audio noise, like when you tuned your old radio frequency. Any thoughts or suggestions? Thanks!
Dude! Ive been a professional drone pilot for years, I fly some of the biggest drones out there, and this tiny little thing gave me fits trying to bind it after i replaced the FC... this video got me back in the saddle! THANK YOU
Amen brother. That's why I made the video. It was an absolute nightmare getting it to work the first time. 😂
I was having trouble binding a quad on the BetaFPV Lite Radio and your video helped me. Thanks for doing that summary the second time. I know some may say those watching can just rewind, but somehow the way you said it made it super clear. Just wanted to leave you a comment that your video helped me. Keep up the good work.
Very awesome to hear! Thanks for taking the time to comment!
Thank you for posting this video. After 2 hours of trying to bind it to the controller I came across your video. Best instructions for newbies. All other videos I came across don't explain the binding process in detail.
Awesome to hear!
Thank You So Much for this informative video. I recently received my kit and couldn't get it to bind. All is working now.
Thank you Sir! I'm not great with PCs but thanks to this video I ordered a full betafpv kit with this controller. I love I can get into fpv without losing my mind over my PC
hey, thanks, mine was bound out of the box. But have a couple of questions. -And please note that the meteor 75 lite I got is a bit different than the one you show.
I don't have any buttons, but I do have a micro USB socket on the FC board. Hoping I can get into betaflight with this, but have found zero info.
Ah ha, Just figured out I have the F4 1S AIO board not the Lite 1S which is discontinued, but not exactly -mine is a brownish board and slightly different layout
than the F4 board shown on the betafpv site. -hmmm .
1. first -the goggles and your glasses -Mine fit inside without the side pieces but need higher magnification to read data -what do you do?
2. flight - Small, I mean small touches to the throttle (in Level-s mode) change it from on the ground running to smacking off the ceiling. Can lowering rates fix this?
3. I see no access to OSD to change Tx power, rates etc. hoping the micro plug will solve this. Flicking SC killed the video, -rebooting goggles and channel search brought it to a different channel and displayed -LAYOUT- menu. None of the Tx controls work to change anything.
After lots of troubleshooting, I realized I'm in the exact same situation you are. We have a different board than he is showing in this video.
It seems like our board does not support 200 mW vtx?
Also, beta flight doesn't seem to recognize this board, so I think maybe it's running silverware?
It's funny that even though we have a micro USB plug, I can't seem to get it to connect to beta flight. Their website seems to suggest this FC board comes flashed with betaflight, but I can't get it to recognize. And I have other drones that I connect to the same computer with the same port, so I know my setup is working.
Have you had any success at all connecting into your PC?
I did find that our OSD menu has an advanced screen with more options available. Still no 200 MW vtx, but at least it's something.
@@wmcewa01 I'm waiting to hear from Beta. Lots of holidays in the way. I'd have to start from the ground up (literally) with betaflight.
I guess i need to do that anyway. I just want to fly this f*cker.
I ordered this kit aug 30 from beta's site, with 7-10 days shipping. Go it it 3 weeks later, and it's been dead since. I have 4 emails into support@betafpv.
I realize there was a lot of holidays in between but this is not looking good.
@@salvor1 do you have a ticket open at betafpv.freshdesk.com?
I have my ticket open there, and I've gotten at least one update (although that one update was useless).
Can we change the antennas on that goggle?
what would be the best choice?
I was wondering the same :(
how do you enable smart audio?
Just got my Starter kit from BetaFPV and been crashing the drone left and right with my 9 years old. Been searching all night last night and couldn't find anything about the switches and different fly mode, not even on their website or the manual it came with. Thank you for covering all the different mode and what the switches does.
Awesome to hear but even better than that is flying with your 9 year old. Glad I was able to help. Keep having fun together!
Buddy RC thanks! While I have you here, is it possible to tune it so it’s not so responsive? Also I feel the drone tend to lean toward the left a bit, is there a way to calibrate? Sorry that I dragged you into more questions, was not planned :D
What do we do if we have the new flight controller? For binding
Betafpv has sent me the updated kit. I'm just waiting for it to arrive so I can make some new videos.
@@BuddyRC Hey so I figured out how to get the new flight controller into binding mode, but slight problem. The drone comes in d16 mode, and the controller is in d8 from the last drone. How do I flip it back to d16? I tried holding down the bind button the same way and nothing would happen. It would just keep blinking three times. I have tried to go into betaflight to put the flight controller itself into d8 mode, as it says it can on the website, but I can't figure out how to make it work. Any tips?
Update: I figured out why it wasn't working! A red wire had crossed over to where the bind button would press down, so nothing was happening. I tried multiple ways to figure out the binding method, as the website doesn't mention anything, and I think i managed to do it. Ironically, the flight controller somehow ended up going back into d8 mode, so the controller thing ended up being a waste of time. Anyways, I managed to get it paired I think, the light blue light flashes and it beeps when the controller is connected. I can;t get it to react though, it says its in turtle mode, and the screen keeps fizzing out. It's very weird. Any advice would be great!
@@remiiqbal9790 Mine is also having this issue. It connected right out of the box for the first two flights but after a mild collision with the wall the motors turned off on their own and now it will not connect. Hoping it's a software issue as the crash was very mild.
@@jonathanlaurie7855 do all four motors spin up when you arm the quad?
Have you had any instability with the video channels? I keep losing video during operation despite drone, goggles and controller being within arms reach, and when I turn it all back after having everything working the video channel seems to have been lost. Also, for me, the labels for the channels are different between the goggles and the drone, and setting the frequencies the same (e.g. 5820 M) on both doesn't work, so something is out of sync. Did you see anything like that?
The VTX on these have been overheating, causing the drop no matter how close or far you are to the drone. People have been getting the F4 1S AIO Flight controller to replace it.
I'm having trouble binding this. Some videos are just plugging a battery in and turning on the controller and pressing bind. I've tried that with no luck and I have tried your way. When I try your way I never get the 3 flashes on the controller. Frustrated and ready to return it. Any help? Suggestions? Thanks
It's a painful process for sure. Only compounded by the fact some come direct from the factory not bound.
Ensure the throttle stick is all the way down when you go through the process of ensuring you're in D8 mode. If you aren't in D8 mode the quad won't bind. If you follow this video exactly and it doesn't work shoot betafpv a support ticket to see if they can help. The steps in this video have been what has helped many.
If a replacement or return is needed at the bottom of the buddyrc.com you'll see 'warranty and returns' just follow that and it's pretty straight forward.
I bought my kit with you, the video is very good mine I have a signal problem, lose the image, what can I do to improve the image reception?
The first suggestion is to always verify the channel on the goggle and quad match. It can be one channel off and look like it's good until you start flying and you'll lose video after a few feet.
VTX overheating, I have made sure that everything is binded correctly and will fly in directly in front of me for about 10 seconds and it loses image. When in the cold weather it works fine.
Hello, I need some help, somehow my set is a little different. I don’t know if it’s older or newer. But in the OSD is super limited I can’t set anything about smartaudio or rates etc. Would be super greatful if someone could help me out a little bit.
Does your drone has a USB port or is it identical to the one shown in the video? My has it and the osd is different too 🤔
@@erickjordali7787 Yes there is a micro USB port on the bottom of the PCB. Sadly I still havent found out how to set it up poperly. Maybe by connecting to Betaflight one could change these settings.But since Im new to the Hobby I dont want to ruin something. In case you find anything it would be awesome if you let me know aswell :)
@@I9BlackI1Knight I'm new too, some people say that the usb is for flash the FC not for configuration in betaflight
@@erickjordali7787 that is all correct. This new board runs silverware, not beta flight. And it's 25 milliwatts only, no option for 200.
@@wmcewa01 do you know how to get the older board, which is up to 200mw or another suitable for this 1s drone?
How are the (3) switches supposed to be set to get in the easiest/slowest flight mode of all?
I just got mine 1 h ago and I'm flying on LEVEL mode at home. It's a bit too fast for me. I've tried to lower the rates from 800 to 60 but drone is still super fast ;) Maybe rates affects only ACRO mode but I'm scared to turn it on at home :P I'm not sure what else can be adjusted. Please let me know if you will find some solution.
UPDATE after a month with Advanced Kit 2: I burned Mosfet transistors at one motor while trying acro at home... I don't really know why it burned - drone just hit the wall and fell down without geting anything into props. Most probably due to broken frame, it was looking fine and props where free to move but probably when I "touched" the wall frame touched the props and it was enought to burn mosfets. In the end I just bought new FC with BetaFlight and USB port. I resoldered VTX and changed frame. I must say that it's AMAZING how many things you can configure in BetaFlight. I can switch my quad from super fast to super slow just by switching profiles on the radio! Now I'm waiting for Tango 2 with multiprotocol module as my RadioLite2 started to produce "shaky" stick positions. Looks like green potenciometers are shitty - I bended them a bit, it helped for a while but problem returned :/
Hi, great video! Got my kit through last week.
I can’t seem to connect the video to the goggles though... it will connect after searching but then drop out a minute or two later even if left right next to each other. I’ve tried going in and setting the channel as B1 then setting the goggles to B1 but then it doesn’t receive any video at all. I’ve also bumped it up to 200mw but still no change.
Any advice would be great!
I’m having sane issues
Thanks for this video, I just ordered my beta fpv kit and can’t wait to set it up! Thanks for being a resource for all of us
What screwdriver i need to replace the frame on the meteor 75 lite ( advance kit 2 )
Thanks for the video! It is very helpful.
I've ordered Advanced Kit 2 a week ago and looks like Betafpv have improved the instruction. Now it contains proper information regarding binding the quad (process is slightly different from the shown because flight controller has changed) but there is no single word how to change protocol on the literadio (and the remote controller is not in the DP8 by default).
BTW, here is the updated binding instruction:
- power on the quad
- press the bind button on the quad
- power on literadio
- press the bind button on the back of the literadio
- wait the signal from the quad
Sorry for my english :)
Great video, just got this as my first FPV drone and the video was a life saver! Cheers!
Glad it helped!
Been learning with basic start kit couple weeks Now radio is stuck in ACRO . Any suggestions
By flipping all of the switches it just stays there and doesn't move?
@@BuddyRC WOW! Thanks for the quick response, yeah no change. Should I open it up see if somethings disconnected
Dale Hendrix honestly I don't think that would happen. I would reach out to betafpv through their support system and see if they have heard of this happening before. Personally I haven't seen or heard of any issues like that before. Did it just start happening? Still able to fly but just only acro mode?
When you said flip ALL switches got me thinking. Tried again and at first only arm switch worked but after several various switch flips it started working...or maybe I was just high, anyway keep the tutorials coming for fools like me
Dale Hendrix hahaha that's the thing with this setup is acro switch overrides everything. So it's funky but once you realize it's the switch combinations that change flight modes I just flip them til it shows me what I want 😂
I just got this kit and this is the best advice ive seen. Well done
Thanks Darren!
Just got this kit and its great. Been flying for about 20 minutes now and it is beginning to drift when i am not turning it. Is there a way for me to recalibrate it to make it not drift away?
Great video!
Just bought this kit; my OSD looks completely different...and only has two options (CONFIG/LAYOUT). how do I get into the more advanced settings like you do in the video (smart audio, etc.) ?
Interesting. I reached out to betafpv to see what changed.
@@BuddyRC thanks for reaching out! Maybe they changed the software.
@@coffeemug612 they have been updated, go to config, starter, and do left left right right with the right stick and you can go back and change vtx freq
I bought this kit on black friday deal and I have a completely different OSD options.
Can anyone tell me if they changed the board with worse vtx power?
I can't change vtx power to 200mW so I have only 25mW?
I ordered mine on black friday and got it today. My menus are different too. I only have 3 modes too.
Same deal. It's on a different flight controller.
I also can't seem to get it to connect to beta flight. Have you all had any luck connecting it?
@@wmcewa01 I haven't tried to yet
@@wmcewa01 mine seems to drift forward constantly. I would like to adjust the trims on it
@@00powerstrokin I don't think even the OSD has trim options available. I'm relatively new to this but there's two things I can suggest:
1. Make sure you start the drone on a completely level service. I believe the gyro calibrates on drone startup. (so plug the battery in, place it on a level surface, and wait for those second set of beeps)
2. Mine seems to start off drifting, but then recovers quickly. After one or two seconds of having to make manual adjustments myself the quad seems to stabilize.
Fantastic video buddy. Just bought this kit and couldn't get it to do a thing. Came unbound and I drained both batteries trying to figure it out. Until I found your video. Just waiting for them to recharge to try your setup. I've already changed the transmitter to D8 as per your instructions. The provided instructions are rubbish. I thought I'd been sent a duff drone and would have to send it back to China or where ever BETAFPV are based. Big big thanks again for a great video.
Excellent to hear. And comments like this are what makes the effort to make these videos worth every second!
Same from me, but worse: There was a loose joint inside my Literadio 2 right out of the box. I did everything as you instructed, but the transmitter wouldn't go into binding mode. Tracked down the problem joint and fixed it - now everything works, but I wouldn't have even started looking for it if I hadn't found your video. Thanks man!
Hi.
The tail of the Meteor 75 lite drone was cut during the flight.
How this part is called?
And how can I set a new one?
Thanks
Do you know how to fix a motor that wont spin? When I arm the drone, the front port motor won't spin very well.
Same issue here, I change the motor with an other one same issue, so it's come from the flight controller board in my case
I had a crash in some mulch and didn’t disarm fast enough ( I think) and have this same issue. I suspect I burned the ESC, which I have no idea how to replace. All 4 motors are fine since I can re-route the one that won’t arm into a different port and it turns on fine. Was having a blast with this drone till that happened. I guess a new FC board is the only fix?
@@tommustang02 Yep, after a few emails with Betafpv customer service, they said to me that the FC is dead and they send me a new one (my kit is still under warranty).
great video, helped me understand more, but i tried to change to D8 mode just like in the video following exact steps and it won't do anything, it just turns on (directly to blue after green), no flashing in between or anything. the only flashing i get is the normal "binding" flash. anyone has the same issue?
Hey man, yes. I had the same issue. I opened the controller up to see if everything was connected properly, and found a loose joint on one of the boards. I touched that up and suddenly it all worked perfectly. I still can't fly for sh!t, but at least everything else is fine now.
@@waldovanderwaal Where was it? I don't really feel comfortable just going to town hoping i'm soldering the right thing
@@theangryginger7582 TBH, I can't remember off-hand. But when I opened the transmitter, there was a loose wire and just one solder joint that it clearly should've been connected to. My advice: Just open it carefully and take a look. Definitely worth it...
@@waldovanderwaal I did and I didn't see anything. However when I pressed the bind button directly on the circuit board it started working again. Weird
I have just recieved my kit a few days ago. I have enjoyed it for a solid 20 minutes... then something has happend and I have no or extremely weak video signal. So I am unable to fly the drone as I see nothing the moment the drone is further than a meter away. It is really really frustrating. I have no Idea what might be the problem.
Having the same issue have you figured it out yet
TJ please help me i really need help ! i got sent the transmitter with the throttle on the right. i just cant adapt and have no idea how to change it to mode 2! can you please make a video of this as there are no tutorials showing how to swap the throttlles over.
Thanks for the video. Do you have any idea how to adjust RSSI not to use Aux4 (SD switch)? Our BetaFPV lite radio 2 has Aux4 as a switch and I'd like to assign it to something in betaflight, but Aux4 (SD switch) is being occupied by RSSI for one particular quad using an XM+ receiver. I have no issues with other quads. Just this one GEPRC Skip 3 HD where it wants to use Aux4 as RSSI instead of letting me assign it to my desired function.
Hi! I am having troubles while binding my Cetus lite brushed. I did everything you said and it keeps flashing in green. I updated both drone and LiteRadio 2 SE firmware but the problem continues. Any idea on how to get the drone recognize the controller?
I went into that menu this morning and messed someday up. The drones flashing green. Is there a way to do a factory reset ??
Your video helped me sooo much when I first bought the kit! Thank you!
Awesome to hear thanks Dennis
Thank you for the excellent video! My radio lite 2 has troubles with potentiometers for the second time (values are jumping). I'm going to buy RC Radiomaster radio with frsky D8. Will I be able to bind drone from the kit to RC radio like radiomaster? Or will it only work with Radiolite 2 controller. Thank you very much for your answer!.
Apologies for the delay! YES! Radiomaster will work with this!
@@BuddyRC Thanks! I already fly with it its a heaven compared to radio lite 2 :D is there any Expo set up inside silverware board or are all axis linear? I can set rates from OSD, but im not sure about expo or any non linear adjustment. Thanks Buddy RC!
Haven’t received my kit yet, but I believe this video will be helpful in the near future. More videos please, especially about using the controller with a simulation 😊
instablaster...
I purchased the beta 85 pro frsky version I’m using the beta lite radio both sticks are acting like the throttle how do I fix that ?
Hi. Thaks.
I have some problem to reconnect the quad meteor75 to remote controler. I push the button on my quad, green light starts to blink, push bind button on rc but nothing happens :(
Any ideas?
Which mode is best for beginning? Level??? Thanks
New learning opportunist here. Does it need to be binded the reason the controls have a "make no sence" effect on quad?
So ALL need to be bineded when new?
Thank you
No. It should be good to go out of the box. But there have been incidents of it not being bound. So if it doesn't work out of the box then follow this
Hi man just got this drone for Christmas. It worked well for a week and a half but now the vtx is lagging. The goggles loose the image every 30 seconds. And the range is shity compared to what it did before. I don’t know if it’s the antennas on the goggles or the antenna on the drone. I don’t know what to do please help me.🙏🙏
Overheating VTX, get the BetaFPV F4 1S AIO and re bind.
My kit shipped just before Christmas and arrived yesterday. Tx and drone not bound out of box. Tried BETAFPV,’s manual instructions as well as this video to rebind - no luck. The bind button on the drone is in a different location than shown in your video, so I am wondering if it is a different version. I have written to the manufacturer for help, so waiting. Pretty frustrating.
Different kind of experience (yes, and price) compared with DJI products!
Yeah man! The kit has changed since this video. They have sent me an updated kit I am just waiting for the postal service to decide they want to deliver it. I will be uploading new videos once it arrives and I have time to get my hands on it.
@@BuddyRC FINALLY I got the updated kit to bind, but I had been trying so many different things, I am not 100% sure what exactly made it work. One thing is certain: I had changed the Tx to “3 red blinks” on start up (as described in your video) before I succeeded. With the Tx already powered on, I believe the magic happened when I then powered on the drone letting it power up properly for a while, THEN pressed the bind button. Then power off drone, then back on again:) :). Have not heard back from BETAFPV yet.
Your videos are very well explained, so if you figure out how this version should bind exactly, another video would surely help lots of people.
Awesome man glad you got it and thanks for the explanation. I'll definitely be creating new videos!
hi, what is D16 in Betalite radio 2, is it the one red blink or the 2 red blink? I am trying to bind it a Beta95X whoop V2 Frsky FCC...Thanks in advance
Great video! I'm older and not really an advanced flyer. To get Stability mode, B is flipped to which position? Considering that I already have a set of Eachine goggles and I fly in Stability mode, just messing around in my yard, which quad and controller would you recommend? I want real sticks on real gimbals, not the thumb sticks and plastic gimbals. Thanks.
Would you have any idea why my Heli spikes up approx 3 ft with no input?? Just hovering Thanks
Thank you so much for this, really helpfull. I am wondering if you have been able to have the meteor75 showing up in Betaflight. The OSD setting are pretty basics and I cannot really change anything ?? I tried multiple usb cables,.. but not showing in Betaflight
Thanks in advance,
Christophe
With these its onboard OSD and can't connect to Betaflight. I have tried many cables and computers and no success.
I have only one button on mine on the right side. Anyway took several tries to get it to bind, but it now spins like a top counterclockwise??
All 4 props are spinning in the right direction. Any advice? Thanks.
It sounds to me like your props are misconfigured, is there any chance you could share a picture?
he may have wrong props installed or opposites need to be reversed. David see our posts and stay tuned for possible FC fixes.
This video is very helpful! My transmitter disconnected and since won't flash when trying to get it back into frsky d8. Do you know what the issue might be?
Hey this might sound odd but my switches don't seem to work right at all...I bound it to my tiny hawk freestyle 2....the sb switch seems to be all the way up I put my throttle all the way down then one switch down it beeps then one more down the props go. No clue what the rest do
You have to set it up in Betaflight
This was super helpful. I finally got it bound. However, it won’t arm and fly. The switches change the mode as expected, but the SA switch does nothing and the props don’t spin. Any advice? Any idea where to find answers?
Were you able to find a solution? If the OSD is showing the switches working my first step would be to unplug and plug in so it's level as the battery is plugged in. Verify that the drone is not in turtle mode.
I just got the kit but the googles dont work. It says its connected but it doesn't show a picture, just grey. Can somebody help?
Great Review looking forward to more Quad videos also Take Care
Thanks man. Definitely have more coming 😉
Hey thanks for your vid- I’m a complete newbie. I ordered the betafpv advanced 2 kit and I’m trying to put this in binding mode and I’m getting solid blue light. It’s not changing colors when I hold bind with throttle down. Any tips?
hi,will the BETAFPV LITE RADIO 2 work for tiny hawk drone broke my controller last year. thanks
Hi thank you for the video. I tried and tried with the supplied manual many times, and was close to returning the product to BetaFPV. I have succeeded in binding it and the goggles working also, so thank you for that. Although I don't seem to have the ability to yaw?!? Do you have any advice on this? It would be much appreciated. Thanks
How do you know which channel is the best to be in?
What if we don't get a fast flashing light when holding the button and plugging it in??
When I take off the quad wants to drift to the left. How can this be fixed with out beta flight?
You have to be in d8 mode to bind with the drone ?
Buddy RC -you said below with David W you just received an update. Without waiting for the video, what is the update?
Not a clue honestly. Just received and it takes a bit to actually dig into the product and get the information from it.
Thanks will try! Newbie question: Is normal that mine is "debinded" after barely 3 battery uses (so 10 minutes flight)?
I can’t get mine in acro mode. I have tried all switches. It will at times say it is in acro mode when I have the switch in safe but once I throw it out of safe it will go into one of the other modes.
can you switch between mode 1 and mode 2 transmitter? I need my throttle on the right stick
Please visit the manufactures website for help with that.
Hi BuddyRC! I had an issue... I messed up my sons BetaFPV Meteor75 Lite, due to unfamiliarity with Silverware. I went into the OSD and accidently changed the Rx protocol from D8 to SBUS and now I am stuck there and i can't get back to d8...Any ideas to help me get my son flying again would be great!
This will probably take some close focus but... support.betafpv.com/hc/en-us/articles/900005303906-How-to-Flash-Firmware-of-Lite-FC . This is a link to reset the drone and give it firmware. Could possibly mess up the drone but worth a shot.
Any idea why level mode would spike 3 ft at a time straight up??
I was asking about blue screen a few weeks ago. It happened again but this time I had sd card in and blue screen is just DVR
loading. On that subject, how about tutorial on how to use. I can see I have recordings but wanted to know if I wanted to erase.
Couldn't figure out how to play
Hi bud. I bought the advanced kit. I CAN'T record at all. I changed my mini SD card and nothing. I hear like static and black screen. Any idea plz i can use the help. Thx
Excellent videos
THANKS TO YOUR VIDEO I WAS ABLE TO FLY THE BETAFPV FPV DRONE THE SAME AS THE ONE YOU POSTED, THANKS AGAIN, SORRY THE ENGLISH IS UNFORTUNATELY TRANSLATED I SPEAK ONLY ITALIAN, HOWEVER THANKS AGAIN.
Flight controller is broken, they discontinued production. They offer to buy a new model of controller.
But, I don't understand wich i should choose frsky d16 fcc or frsky d16 lbt???
Hi BiddyRC, how do you bind the LiteRadio2 that comes with this kit with the Beta85X V2? I got the kit plus the additional bigger drone to use it with Insta360 GO. Thanks.
Why is my OSD different than yours??
I just received the updated version! Should have new videos coming soon!
Why does my drone from this kit has a USB port?
@@erickjordali7787 I would like to know also
see my posts on this
Is the meteor75 lite advanced kit 2 still a good buy today?
A kid broke the radio so we replaced it and are trying to bind the new controller to the old drone. I follow your steps but when I click the bind button on the bottom of the controller the drone doesn't blink. I think I am in D8 mode but it's hard to tell. If you count the red flashes before you hear the sound when you turn the controller on or after you hear the sound. As I power the controller on it flashed three times, but after it flashes 3x and then you hear the sound, the flashes are super hard to count. So I can't tell which flashes I count, before or after the beep. Can BETAfpv please put up some training videos on their channel?
How do I change motor direction? I can change it in the osd but won’t save . Relight now all my motor run in r
My meteor 75 goes to full throttle and won't shut off unless I disarm. Any ideas.
super helpful video! This is the perfect tutorial for the advanced kit!
Thank you!
hi buddy, i like the way you present binding of betafpv advance kit 2 and honestly i was able to bind my quad just base on your video, it really helps me a lot... do you have a video tutorial also that bind the lite radio transmitter 2 to Beta 95x whoop v2 frsky fcc, please help and thanks in advance
Hey! I actually don't have that! But I can look at adding it+
Checking the betafpv page, the TX is 25 mW. How can you change it to 200 mW? Wouldn't that do nothing at all?
These no longer come with that option, older ones did, ones from 2 months ago.... not so much.
Does anyone know how to change the channel mapping from AETR to TAER on this particular drone?
Is it normal to have to bind every time you turn it on? How do you get out of bind mode if so? Thank you
Jesus christ...thank you. Thank you. Thanks you.
Its amazing how you purchase this but there isnt any basic set up instructions
I do have a question if you dont mind.
I got everything set up as per ur video however the drone doesnt take off. 😢
Is there anything else needed to be done to get airborne?
Any suggestions would be appreciated
so I just got my kit but mine doesn't have smart audio option in the menu it only has layout and config. im so lost
total newbie to the fpv drone I never used goggles before and I just see a blank blue screen when I hit the search button so any help on how to connect the goggles would be helpful everything else seems ok got the receiver to bind but don't know where to go from here cant see anything through the goggles.
Press and hold the search button to change from AV and Radio mode, tap once to auto search
What is the maximum range you can achieve in the field?
Thank you for the video dude! It´s very good! Anyways I buy this kit advanced 2 and the bottom of my drone is diferent, only have a button and another plate that I don´t know what it is... The OSD drone is different too. I only have CONFIG LAYOUT SAVE and EXIT. In CONFIG only have RX on/off, LED on/off and AUDIO on/off.... I don´t understand nothing and I only could fly my drone twice because the OSD say me that the voltage is 9V, suddenly dissapear de ODS info or other strange things... I only want reset the configuration but I dont know why hahahaha a complety dissaster...
I've reached out to betafpv to see if I can get the updated kit and do a new video
@@BuddyRC Thanks for your reply! I can give you some info about this now. At the end was a fault FC in my meteor 75 lite that didn´t allow me change the options... They send me a new FC but now the problem is the transmitter. The gimbals don't work as they should and looking for on UA-cam is a very common problem that happens after 2 weeks of use normally...
I don't know if I was unlucky or it's a bad kit. Regards and thank you
a mi no se me conecta la emisora y no puedo encender motores, para que sirve el botón set up ...???
would this be the same set up for the Meteor 65HD? Everything else is the same, just the drone is different.
mine is completely diffrent all this stuff dosent work on my drone
is this transmitter (literadio 2) can be binding to bayang protocol? i was thinking to buy another drone but the protocol is bayang..
thank you.. :)
Great video, How do you trim this thing ?!
Can this be set to mode 3 in the osd? i searched high and low and cant find a answer
this might sound like a dumb question, for anyone who can answer id appreciate it.
i have a spektrum DXe that came with my aeroscout. can i bind that with the cetus? do they speak the same language?
i have goggles too that i know will work with the drone but i never messed with the transmitter.
If you’ve got the newer FC that only has one bind button, you don’t need to press it to enter bind mode. Just wait for the yellow/amber flashing lights on the fc then press bind on the controller. The fc bind button changes the receiver mode - check it’s D8 in the OSD
Hi! I just received my kit and when I push the bind button at the same time that starting the controller, the light turns red. Is is normal, am I doing something wrong?
The bind button on mine is in a different place, on the left of the controller board, at the level where the top left arm is attached to the frame. And pressing it as I plug it doesn’t get the green LED flashing.... the only advice so far from my seller was to try following the steps in this video so completely stuck....
For me when I press it the button goes green then red but does nothing else. Do you know how to fix this
Super neat video. I have the starter kit, in which they give you the same, except the drone is slightly different (the 65s).
Unfortunately or so I believe, I got mine with the bayang protocol (not sure if I can do somtheing about that now). I do not really know if the drone has any technical issue, but the range is a complete joke. I get like 30-40 feet outside. Not to mention, when I use the DVR function on the goggles, the video which it records is of a supreme sh*t quality. It does not even match the mediocre quality which I get live, unless the drone is within 3 to 5 meters, the video just turns into white bars. And also there is no sound to that recording. There is only some scrambled audio noise, like when you tuned your old radio frequency. Any thoughts or suggestions? Thanks!
Man I just got mine and I'm new to fpv and man so much fun and super easy everything I'm addicted so fun and really good drone for beginners.
Awesome!