I'm no stranger to construction or DIY videos, but, I am learning sooooo much useful information from watching your channel. Thank you for being so clear and detailed, and for sharing helpful tips in every video. 🏆
So kind of you to say Kathrine! I enjoy learning and sharing what makes my job easier and better. It’s a pleasure and I appreciate the support. Also love to see so many women doing DIY projects like you! 👏🏽
Not technically. The 2 screws prevent the vanity from pulling away from the wall... it's the 2x4 she attached to the wall studs starting at 1:17 that is supporting the most of the weight.
Thanks for watching and supporting my channel. Will you be installing your own vanity? 👏 Watch Next: How To Install a Water Efficient Toilet: ua-cam.com/video/xYLK5dnalqsS/v-deo.html Exhaust Fan Replacement: ua-cam.com/video/imnsgeHcn0Q/v-deo.html
Thanks for the tip! You could definitely do that too. 💪🏽 In this one I’m following the manufacturers installation instructions which calls for lateral blocking or studs. 👍🏽
Never use longer than 2.5 screws. Pipes and electric are usually in the center of the 2 x 4 , longer than 2.5 screw are more likely to hit and what a surprise...
Hi Sam, your recommendation is a good one to prevent damage. For a really heavy vanity like this I have to use structural screws or lag bolts. It’s required by the manufacturer. I also opened up the drywall for added blocking and to see where my screws would line up. 👍🏽
Thank you and this is a great idea to install floating vanity. Do you need to remove the supporting stud beneath after installation? Or just keep it there?
Hi, this vanity manufacturer requires plywood beneath the vanity to help support it. I beefed it up to a 2x4 because it’s really heavy. It stays there and it isn’t seen. Thanks!
Just discovered your channel and I'm hooked! If this vanity was not square, would you have used shims or how would you level it out? Thanks and keep up the good work!
Great video. I'm in the process of hanging a floating vanity and I just discovered a bow in my wall and its not straight. Any suggestions on what i do with the gap. It looks like the gap is least 2 inches on one side
If a wall is bowed you would typically shim the wall or add furring strips. For a 2” gap make sure you add that length to your screw(s) so it’s properly secured to your studs. Thanks for the question! These situations come up. Good job ahead!
I am needing to install new cabinets in a small powder bath and love the tone and style of the wood. I’m in the states, what should I search for when I’m looking for something similar?
Thanks Danielle! I love the look of this vanity too. It’s warm and calm. This cabinet is made of white oak. You should be able to find something in a similar tone in your area or online. Good luck, hope you find something you love.
On more question.. if I have metal studs, what's the best solution? Should I open the wall up and put in a few wood studs tied to the metal studs? Or is there another solution to just tie directly into the metal studs?
If you can tie into your studs that’s a good solution. If not you can add lateral blocking. This vanity manufacturer requires lateral blocking because it’s really heavy. Also I used 4 structural screws to mount it.
@@DaruDhillon ok great, I think I'll add some lateral blocking. My vanity is probably about a third of the size of yours, and I may as well make sure it's secure 🙌 Thanks again!
Women can accomplish anything a man can. I don’t have time to wait around for a man. Help yourself. Stay motivated, practice and learn from your mistakes. Anything is possible if you believe in yourself.
Maybe this is just a coincidence, but not unlike a structural screw, i've also been described as round, big and designed for maximum holding...just saying
These corner brackets came with the vanity. The vanity is really heavy so I used 4 screws to mount the unit. They are similar to the corner brackets used at IKEA for their vanities or kitchen cabinets.
Hi Chris, these brackets came with the vanity. Some vanity manufacturers will have them built-in. For solid wood or plywood units. I searched for something similar to recommend but I couldn't find them.
Having a bottom support is required by the vanity manufacturer. A plywood base support was included with the vanity but I beefed it up with a 2x4. Having a bottom support is common in vanity installations and many cabinet manufacturers will want it installed or you will void your warranty. Is there a reason why you don't like having a base support?
I’m using structural screws which are commonly used in construction in place of lag bolts. You’ll see them used on decks to fasten ledger boards and in other structural framing in larger sizes. You must have a really sturdy bed! 💪🏽🛏️
I came to UA-cam to fix my Garage door, little did I know I would fall in love...😂😘🇬🇧
Welcome! ❤️ to you in 🇬🇧
I'm no stranger to construction or DIY videos, but, I am learning sooooo much useful information from watching your channel.
Thank you for being so clear and detailed, and for sharing helpful tips in every video. 🏆
So kind of you to say Kathrine! I enjoy learning and sharing what makes my job easier and better. It’s a pleasure and I appreciate the support. Also love to see so many women doing DIY projects like you! 👏🏽
It makes sense to use structural screws for the weight of your vanity fair , great tips appreciate your helpful installation.
Thanks Richard!
Are you telling me only 2 screws are holding that vanity up? that's amazing!! great video. girl power. :)
Not technically. The 2 screws prevent the vanity from pulling away from the wall... it's the 2x4 she attached to the wall studs starting at 1:17 that is supporting the most of the weight.
Absolutely Beautiful, smart and talented young lady.
Thanks 😊
Perfect video!! Subscribed exactly what I needed. Love the base to have it sit on and blocking between the studs 👍🏻
Thanks David! Vancouver is beautiful. I’m originally from Victoria.
I quite enjoyed this! Easy instructions & short & to the point. Thank you! We will be installing a floating vanity when we remodel ours.
Thanks Holly! It’s not a hard project and totally worth it. Good luck! 👏🏽
Thanks for watching and supporting my channel. Will you be installing your own vanity? 👏
Watch Next: How To Install a Water Efficient Toilet: ua-cam.com/video/xYLK5dnalqsS/v-deo.html
Exhaust Fan Replacement: ua-cam.com/video/imnsgeHcn0Q/v-deo.html
Such great detail Daru... easy to follow, step by step. Thank you!
Fantastic Donna, thanks! Happy to help. 👍🏽
if your going to cut the wall open you may as well install in wall steel brackets
Thanks for the tip! You could definitely do that too. 💪🏽 In this one I’m following the manufacturers installation instructions which calls for lateral blocking or studs. 👍🏽
You don’t miss a trick.
Thanks!
Never use longer than 2.5 screws. Pipes and electric are usually in the center of the 2 x 4 , longer than 2.5 screw are more likely to hit and what a surprise...
Hi Sam, your recommendation is a good one to prevent damage. For a really heavy vanity like this I have to use structural screws or lag bolts. It’s required by the manufacturer. I also opened up the drywall for added blocking and to see where my screws would line up. 👍🏽
Thank you and this is a great idea to install floating vanity. Do you need to remove the supporting stud beneath after installation? Or just keep it there?
Hi, this vanity manufacturer requires plywood beneath the vanity to help support it. I beefed it up to a 2x4 because it’s really heavy. It stays there and it isn’t seen. Thanks!
Just discovered your channel and I'm hooked! If this vanity was not square, would you have used shims or how would you level it out? Thanks and keep up the good work!
You got it! Shim the back or side to make it level or plumb. Welcome and thanks! :)
Flush the water lines before you hook up to the faucet.
Hello - can you share the source for those mounting brackets, please? Thank you!
Beautiful job!
Thank you!
Great video. I'm in the process of hanging a floating vanity and I just discovered a bow in my wall and its not straight. Any suggestions on what i do with the gap. It looks like the gap is least 2 inches on one side
If a wall is bowed you would typically shim the wall or add furring strips. For a 2” gap make sure you add that length to your screw(s) so it’s properly secured to your studs. Thanks for the question! These situations come up. Good job ahead!
What about installing and connecting the sink to the PVC drain pipe?
Great suggestion. I haven’t made one yet but will keep that in mind for the future. Thanks!
That's easy. 🙂👏👏👏👏
Thanks Tas! It’s a good project to DIY. 👍🏽
I am needing to install new cabinets in a small powder bath and love the tone and style of the wood. I’m in the states, what should I search for when I’m looking for something similar?
Thanks Danielle! I love the look of this vanity too. It’s warm and calm. This cabinet is made of white oak. You should be able to find something in a similar tone in your area or online. Good luck, hope you find something you love.
Where did you purchase the vanity? Love the look and style
Thanks Brett, I love it too! I’m in Toronto it was made here in Canada.
2 words: French Cleat
You can use a French cleat but for this vanity I’m following the manufacturer’s instructions. I would recommend you do the same. 👍🏽
On more question.. if I have metal studs, what's the best solution? Should I open the wall up and put in a few wood studs tied to the metal studs? Or is there another solution to just tie directly into the metal studs?
If you can tie into your studs that’s a good solution. If not you can add lateral blocking. This vanity manufacturer requires lateral blocking because it’s really heavy. Also I used 4 structural screws to mount it.
@@DaruDhillon ok great, I think I'll add some lateral blocking. My vanity is probably about a third of the size of yours, and I may as well make sure it's secure 🙌 Thanks again!
@@samalldredge3536 my pleasure Sam. I often opt to beef things up so I know it’s good. Good luck. Glad you’re doing it yourself!
I always believe a guy helps with the prep and then the ladies come behind them to say they did all the work.
Women can accomplish anything a man can. I don’t have time to wait around for a man. Help yourself. Stay motivated, practice and learn from your mistakes. Anything is possible if you believe in yourself.
How many inches off the fround was this
Maybe this is just a coincidence, but not unlike a structural screw, i've also been described as round, big and designed for maximum holding...just saying
Hey lovely girl.. quick question..
What's the total height from the top of the vanity until the floor?
Xooooo
Hi, This vanity was installed at 34 1/2 from the floor. The countertop sits above that. Hope that helps!
This video is so useful 🙌 I was about to buy metal brackets to install my floating shelf and didn't know how high to hang it. Thank you 🙏
what type of corner brackets did you use?
These corner brackets came with the vanity. The vanity is really heavy so I used 4 screws to mount the unit. They are similar to the corner brackets used at IKEA for their vanities or kitchen cabinets.
Where did you get the brackets? I have looked everywhere.
Hi Chris, these brackets came with the vanity. Some vanity manufacturers will have them built-in. For solid wood or plywood units. I searched for something similar to recommend but I couldn't find them.
@@DaruDhillon Thank you for letting me know! Keep up the great work!
@@chrisgoble4620 Ah thanks, Chris
Nope, I don’t like seeing that “strengthening” 2x4 at the bottom side! Did I miss something?
Having a bottom support is required by the vanity manufacturer. A plywood base support was included with the vanity but I beefed it up with a 2x4. Having a bottom support is common in vanity installations and many cabinet manufacturers will want it installed or you will void your warranty. Is there a reason why you don't like having a base support?
Using bed connecting hardware! LOL!
I’m using structural screws which are commonly used in construction in place of lag bolts. You’ll see them used on decks to fasten ledger boards and in other structural framing in larger sizes. You must have a really sturdy bed! 💪🏽🛏️
your thew best , will you marry me ?
Rubber goes first…..dang girl!!!
At least you won’t forget.