I don't have a solution as I don't use these. But just wanted to say this is why I do whatever I can to stay clear of adding more and more tech on my cameras. I can quickly become just a nightmare of nonstop troubleshooting.
is the power source usb pd? Different cable maybe Could be the daisy chain need to swapped to different ports. I rented this last week. Not easy to setup
I’m having the same issue. Got two motors working with Tilta Advanced Ring Grip, but it starts to have issues after motors slip on the focus rings. Has been driving me insane trying to get it to work!!
Thanks @KongThaoSound! I tried this and it worked, but the issue I’m having is the motors slipping off the focus rings. They slip and then get stuck and I’m stuck with motors not spinning. I must need to adjust the Torque and A/B points for the chosen lens.
@@paulcurtis4188 I see. Maybe you need to secure the lens. Usually, the lens mount wiggles from the focus motor pushing it. If you look at my setup, I have my lens tied to my 15mm rod with velcro so it doesn't move around. That might be what you're experiencing.
try double clicking the motor to make it go into pair mode then touch the A# on top of your handwheel then search and confirm and pair it.
I don't have a solution as I don't use these. But just wanted to say this is why I do whatever I can to stay clear of adding more and more tech on my cameras. I can quickly become just a nightmare of nonstop troubleshooting.
Very true
Isn't 'Pink' Focus wheel?
Also I cannot power two motors via standard USB 5V and had to buy a DTap to USB C cable.. Good Luck!
is the power source usb pd? Different cable maybe
Could be the daisy chain need to swapped to different ports.
I rented this last week. Not easy to setup
I’m having the same issue. Got two motors working with Tilta Advanced Ring Grip, but it starts to have issues after motors slip on the focus rings. Has been driving me insane trying to get it to work!!
*having the same issue - running two motors with Nucleus Nano II.
So I tried it again and I daisy chained the USB cable from the first motor to port 2 on the second motor. Try that and hopefully, it works out.
Thanks @KongThaoSound!
I tried this and it worked, but the issue I’m having is the motors slipping off the focus rings. They slip and then get stuck and I’m stuck with motors not spinning. I must need to adjust the Torque and A/B points for the chosen lens.
@@paulcurtis4188 I see. Maybe you need to secure the lens. Usually, the lens mount wiggles from the focus motor pushing it. If you look at my setup, I have my lens tied to my 15mm rod with velcro so it doesn't move around. That might be what you're experiencing.