Budget E46 Wagon Drift Build | Part 2: Tuning ECU and Welding Diff!
Вставка
- Опубліковано 10 лют 2025
- COP SOME STICKERS BELOW!
imjoel.myshopi...
I got the diff all welded up after stripping damn near everything I touched. Also tuned the ECU to try and get rid of my post cat o2 sensors codes!
Tuning Video: • Tuning an E46 ECU MS43...
Follow me on Instagram: @e30joel - / e30joel
I feel so bad for Joel. Everybody keeps telling him to do those doordash vids in the e30 and I bet that’s so brutal 😂 Keep up the great vids man
inspiring me to take some classes in my local trade school
This guy is just so genuine, and friendly. Keep up the good content bro
I literally sit at work an watch e46 videos all day an I’m glad I came across this channel hella detailed vids
Loving the real-ness of these videos, inspiring me to work on cars more even if it seems too hard, can’t wait for the next vid!!
He’s gonna become huge just watch because this man is so into showing everything. That is the best type of channel
23:20 I can’t remember if this was only for e46 m3 or all e46. There was something about those diff bolts that are threaded all the way that break off. New ones have a shoulder or something so they don’t shear. You can double check.
dude i am loving the content. keep doin u bro, inspiring tons of people
Man this is becoming my favorite channel
Good job man. Glad I found your channel. Super excited about this build.
My boy wavyyy. Thought you had a whole hurricane on your head while you were under the car
So glad I found your channel
I just did the removable core support on my e30 and took my motor out, did the oil pan gasket, flywheel, clutch, and a ZF trans on my M52
I love the e46 content bro and the e30 👊🏻👊🏻
2:50 from what I know deleting the o2 sensors doesn’t let you pass since it cannot ever set codes shows that the o2 sensor is not ready. For some areas you can still test emissions with 1 monitor not set and pass.
in ct, 1 monitor not set will still pass
my g deserves everything coming his way, p.s get a funnel
17:50 you could have used some anti spatter spray to reduce some of the binding issues.
Thank you for the authentic, real video.
Loving thewagon content.
I’ve definitely stripped a bolt like that next time try to take the torque bit and hammer it onto the bolt and hopefully it will grab that last time to get it out
bro your videos are the best homie, keep up the work, i can’t wait to see where the build goes
Hey man great work! I personally enjoy any type of content you put out. Keep doing you bro
New subscriber and loving the content man keep up the work. Been wanting an E46 drift wagon for a while hopefully it’ll happen soon until then watching your videos help 👌🏾
Yea I pull the axel stubs and weld all the spider gears to the case every time I didn’t blew it apart
so excited for this build manual swap bouta be sick, e46 gang
You the man bro!! Been watching for a minute! Keep the vids comin!
alot said that about the temp sensor, but i didnt have a temp sensor for the longest time, but always had ice cold air. so i cant say thats 100% the case on an 01 330ci manufacture date 08/00.
you should use the ms4x flasher software, you don't need to take apart the ECU, just need the BMW port connector to OBD2 adapter
Joel remember me when u get hella famous
Couldn’t have said that last comment any better! Love the work and dedication man
Great job showing it all bro
Aye man, Im moving to CT soon, Putnam? i believe not to sure how to spell it. But i know im gonna be all over the place honestly hoping to catch you out on the road, maybe see one of the beamers
loving the build so far good work!
If you've not seen the 50'skid channel I would highly recommend it for anything E46 related.
Is funny enjoying watching this video having removed my own diff so many times the though of doing it again makes me want to puke 😂
I need to get that ECU software, could be handy if you can do a few other bits also, would love to delete the abs/ DSC lights off the dash caused from unplugging a wheelspeed sensor so I don't have to hold the button for ages before driving
Bro your videos are awesome!
The waves 💯
can't wait for this to be sliding
9:33 what’s more crusty Joel’s waves or the subframe?
Also my cousin from Lithuania had an e46 wagon and it was so much cheaper for it there(he payed €300 for the car (2001) with no errors but the windows and the boot not opening)
These are a great watch, keep it up man
Waves on point my guy 🔥🔥
i love the vids man, keep it up
damn time for part 3
I have a e39 and they should have similar if not the same engine I have the m54b30 3.0L. I hope you plan on turboing!! I wanna turbo my car and there’s nothing for my car or engine that I can find and this is the closest thing to the e39 since they have the same engine. Hope you have a good one :)
9:15 its the spinners for me
aye joel is there anyway you could respond w what year and model the e30 is? Love the vids
Love the process bro 🙏🙏💯
anyone else thinking he should do the doordash series in this car once it is ready?
If it’s supposed to be a drift car I might not be leagal
Hell yeah sweet vid brah
great video bro keep it up
I love these videos! Keep it up!
whens the new doordash with the e30 coming out?
Love this build
Hey Joel, could you setup a POV camera when you are driving? It would be really awesome and immersive!
Bro love the vids, could you explain more in depth how you deleted the o2 sensors? Im Building my first drift car and ist happens to be a e46 too 😁
try and find the video that he was watching, and keep doing research if you cant
Made an e30 like yours in gta...now I'm looking to buy one 🥸
Are you from Westport ? Saw the shirt
How long did you preheat before welding the diff? Much love from Cali
My buddy here in CT failed his emissions test when he had a temp plate and was still able to get plates as long as he showed the failed test certificate.
that's what the dude at the emissions said and the DMV lady said "who ever told you that lied" smh
@@ImJoel he got a full registration but still needed to do it in order to renew his registration In 2024 so there’s still the late fee but if your car can’t pass emissions or you deleted them then it’s worth it.
🔥🔥🔥
man love the content
Fucking love the channel joel will have my diff welded as soon as I figure out the problem I’m having with my car jerking to the left and the right at highway speeds
I wish the diff in my rx7 was that ez, have to drop the whole subframe to get it out
good shit bro
goat
Fiyaaa!0
✊🏽✊🏽🔥
And what u got on timberland??
Fucking love your videos, keep up the good work
What scanner do u
Use and what program
doordash in the e46 !?
You did hella pause lmaooo 😂
👍
Bro if you wanna stop the oil stream from jumping around, tip the jug so that the nozzle is at the top rather than at the bottom. Leaves room for air to enter the bottle and keeps a steady stream.
If youre tryna be real bougee use a funnel lmao
Hope its non chlorinated brake clean
"hey guys, im joel"
29:00 if you delete all the fun stuff then there’s nothing entertaining to watch.
plz do a m3 front
Alright where do I buy a e46
What's the purpose of a welded diff?
Slides dummy
Open diff only spins one wheel when you lose traction, making it hard to slide out the rear end of a car, welding it makes both wheels move at the same speed no matter what
@@arandomperson2050 makes sense
Aye local CT youtuber here aswell, would be dope to collab on something!
why are u still on windows xp tho xD
🤓🤓🤓
That's a thiccums right there
Esa vaina jiede
Who disliked this give me ya addy so we can chat