Budget E46 Wagon Drift Build | Part 4: Bucket Seat Install
Вставка
- Опубліковано 10 лют 2025
- I welded the bucket seat onto the stock electric seat rails because i wanted to do it cheaply. I originally thought it was good but after driving with my knee a few inches from the dash. I will probably change it out down the line.
Jimmy's Video - • Making an ELECTRONICAL...
COP SOME STICKERS BELOW!
imjoel.myshopi...
Follow me on Instagram: @e30joel - / e30joel
it’s always a good day when joel uploads
Realest dude out there. Motivates me to work on my stuff cause of his attitude. 10/10 would recommend
Your videos made me want to buy a BMW, so last week I bought a 2001 330ci 5 speed with 100k miles, love it so far.
Idk where u are now but I can tell you definitely grinded your ass off to get there homie. Your struggle isn't unseen & I appreciate your effort. Keep up the good work Joel
14:53 google grinder wheel accidents from exploding cutting discs... you might just put your guard back on. Fingers and hands get messed up from each explosion plus you can loose an eye. Worst case it gets you in the neck and you bleed out. Those discs have a ton of energy and will fuck you up when they come apart.
facts i was holding for my boss and the disc exploded and hit just left of my hand
E46 ,ONE of the best BMW car:X
im so hyped to see the results from this project
Bro you are so close to 30,000 subs such a milestone I want to see you hit 100,000. That would be even better keep the great work up man
It's a good day when Joel uploads a real video. Keep safe and keep it coming.
Nice! Can't wait for the manual swap
Bouta be late for school but Joel uploaded 🙏🏽💯
I really love this build. Very much looking forward to seeing it complete
Keep up the good work bro. Love the content. Im excited to see the drift build.
To lower the seat further u could drill some new holes in the rail below the holes already in it. If there’s enough room under the seat for it to go lower
Just found you yesterday, glad I did
Man , I feel your pain! I just went through doing the rear o2s on my e91. Idk why BMW puts the bungs on the TOP of the exhaust. Makes everything WAY harder than it needs to be.
“Don’t be a idiot asshole”
Super inspiring homie, really enjoying this series.
I wish I had that condition seat which you tore up 😅 leather on my seat's bottom part is torn up.
I did this to my M3 with the recaro sportster cs and the high was stupid so i went back to regular manual seats brackets and was good.
Yo when you drift out the belt clip through the hole and clip it, it’ll be tighter on your waste for drifting
You inspired me to get an old bmw and I just got a 2004 zhp and I can’t wait to work on it. Keep up the good work
Congrats man! I have an '04 ZHP, you won't be disappointed.
bro every time you upload i get hype keep it up
already excited for the next e46 epsiode!!!
I have the exact same car bro your vids are helping me a lot keep it up
so dumb question on the ebrake swap how do you get it to go back down after you pull it up since theres no button?
where that handbrake mod from
cant wait for the drift videos
I love the vids dude! This is my obtainable dream garage
I’f that’s a ZF TRANS I’d replace the 5th gear and the reverse detent pins. For example my e46 has a 5 spd zf and when I shift from 5th to neutral the shifter leans towards 5th. Highly recommended
Great work boss
thinking of copping a m3 e46 just know this series is great and the vids are amazing bro
Looking forward to seeing it done bro
Man I'm a big fan! Keep making vids bro. Ps did you ever give us an update on if the plastic restoration stuff held up. 🤔 enjoying your open and honest approach.
140k miles on my 330i, I just struggled to get my b4 cat o2 sensors on the Exhaust manifold off, soaked them in penetrating oil every 2 hrs, had to break them off in the same fashion lmao. They're out tho.
Once you tacked the bars in place you could of taken off the seat to not have to worry about burning/melting. Still killin it tho!
Joel what are your dimensions was considering a seat but not sure what size to go with 6ft 195lb
Yeeas! Save my day man:)
So this depends on the state. I have no cat and no sap and passed in texas today. You can have one system not ready here. The sap can be disabled and will read unavailable and the post cat heaters will read not ready. Luckily I can get away with that here in TX.
Loves the videos🐸
Love the videos
I didn’t know you could do this with the memory bracket. I gotta do this now
bro this reminds me of getting my car to pass emissions in ohio. im catless and have air pump deletes and tgv deletes. my tuner removed the codes completely from the ecu, literally didnt turn them off, he removed the code entirely lol. i was thinking im not going to pass forsure im completely screwed, found out in ohio we have little emissions test sites where you do it yourself. i went and plugged the computer into my wrx and the paper it printed out said pass on all of the little slots. i was literally ecstatic. went and grabbed plates that day easy, no questions asked. now im in virginia and in my county there are no emissions. just an inspection. lets see if i pass without cats
Nice Video
Who is that on the wall? 5:40
shouldnt you strip the wagon and sell parts for the build?
Just to be safe bro I think you should just get a custom rail that puts u in a more comfortable position
lets go
LESSGOOOOO
Gotta get some PB-blaster penetration spray.
Duct tape, WD40, and a fuck load of zip ties.
🔥🔥🔥
sheesh whose g80 👀
Fyi the E46 stock handbrake is absolute garbage, you'll be constantly stretching and tightening ya cables, for like an extra 30 bucks ya could have just plumbed in a hydro and be done with it 🤷♂️
If ya feeling flush you can buy the driftworks input/output lines and plumb them straight into the abs block so you don't have to cut any brake lines, shout at me if ya want a more detail description on how to install
Whats the best dual caliper setup that uses stock calipers?
Sure a E-Brake is €125, the plumbing is €30...
But most dual calipers are €550+
i’ve heard some people had really good luck with the stock handbrake so i wanna give it a shot. i wanna work my way up with this car instead of just throwing hella $$ at it and having it be “perfect” right away. i think it’ll be more fun and i get to show what works/doesn’t work
@@ImJoel Okey dokey 👌✌️
@@fuckngreat8955 I didn't go duel caliper so literally just had to buy a hydro/ lines n a couple fittings so was a real cheap set up that works so good I don't feel the need to go duel caliper.
There are alot of bolt on duel caliper brackets that use stock calipers, Google is your friend on that one, but be aware 90% of them require you to remove the standard drum handbrake cables so may make it not road legal ( depending on laws in your country).
@@mrmalavey1098 ooh, interesting...
So What youre saying is, you just plug it into the stock brake lines...?
If so, how does it work with the stock brake system?
Hydro usually has its own cylinder/fluid tank,
(not sure what its called in english)
Where i live, our handbrakes get tested by braking power, if they can stay at full lock, and how far they have to be pulled until they work
(i think less than 5 clicks is usually good on stock e-brakes)
🔥🔥❤️
Idk if I would trust Booger wields to hold me in place in the event of a accident.
A l g o r i t h m
Yes.
Every Mf on the planet has scratched their door sills with the e46 seat bracket corners
Image my man joel LS swap this 🤔
when are the minecraft videos coming?