How to make GOLD FILLED JEWELRY - stacking rings tutorial | Gold Fill
Вставка
- Опубліковано 19 чер 2024
- How to make gold filled jewelry: part two! In this step by step tutorial I will show you how I made these gold filled stacking rings. I personally love this dainty and simple ring design and I received a lot of questions from you, asking how I make these rings. So buckle up, because today I will reveal my secret! :))
⭐️ Follow me on Instagram! 😊 / stardustmine.art
⭐️ My mini online course: How to make silver flowers: art-of-metalsmithing.thinkifi...
⭐️ Enjoyed this video?? Why not check out other similar ones!
- How to make gold filled jewelry: • How to make gold fille...
- How to make gold filled jewelry - NO SOLDER: • Make GOLD FILLED jewel...
- How to make easy stacking rings: • How to make EASY STACK...
⭐️ Additional resources can be found on my Patreon page!
Find out more about becoming a Patron and ways to support the production of the videos: / stardustmine
⭐️ BASIC TOOLS:
- Dremel torch: amzn.to/3UafQtc
- Third hand: amzn.to/4bgB9jJ
- Soldering tripod: amzn.to/3JljTxC
- Soldering block (honeycomb): amzn.to/4azIgnp
- Soldering charcoal brick: amzn.to/3xI8c1t
- Solder pick: amzn.to/3UkLoO0 or amzn.to/3W6otHB
- Borax cone US: amzn.to/3W2A0Yt
- Hot plate for pickling: amzn.to/3xGZ8tP or amzn.to/3UiMie2
- Glass beaker amzn.to/4d3rSgg or glass bowl amzn.to/4cUlkRj
- Basic saw frame: amzn.to/4aUBbgP
- Saw frame: amzn.to/3U2jULN
- Bench peg: amzn.to/3w6LIGO
- Bench peg and anvil: amzn.to/49GfUGJ
- Saw blades: amzn.to/43YYMe9
- Dremel 3000 hand rotary tool set: amzn.to/3U2EqvZ
- Dremel 4000 hand rotary tool set: amzn.to/3U14Q11
- Dremel Flex Shaft Attachment: amzn.to/3xJmaQQ
- Foredom Rotary Tool - amzn.to/3vVGMEI
- Center punch: amzn.to/3JkV9FR
- Rawhide mallet: amzn.to/3vXYs2I
- Ball pein hammer: amzn.to/3W3ZFAa
- Chasing hammer: amzn.to/3UahCKS
- Ring clamp: amzn.to/3JjcIGi
- Ring bezel pusher: amzn.to/3xBCH9f
- Set of pushers: amzn.to/3Uknpyq
- Burnisher: amzn.to/3UkE4lt or Agate knife burnisher amzn.to/49LH3I5
- Barrel (tumbler) polisher: amzn.to/3xyraaE
- Ring measuring mandrel: amzn.to/4aWF2do
- Ring measuring tools set (mandrel, mallet, sizer): amzn.to/3xBD0AV
- Half round pliers: amzn.to/49EJtbF
- Flat nose pliers: amzn.to/4cUkp3j
- Round pliers: amzn.to/3TWpgrY
- Pliers SET: amzn.to/441lJgI
- Wire Cutting pliers: amzn.to/3Q6BGMP
- Flush cutting shears: amzn.to/3xzwwCu
- Steel block for bench top: amzn.to/4aVPeCF
- Selection of sandpapers: amzn.to/3Q5GZMl
Some of the links are affiliate links, which means that, at no additional cost to you, I may earn a small commission if you click through and make a purchase.
⭐️ JEWELRY MAKING TUTORIALS:
UNISEX RING step by step tutorial: • HOW TO MAKE A RING - t...
BEZEL step by step tutorial: • SILVER BEZEL for caboc...
RING from start to finish: • How to make a ring - f...
LABRADORITE RING: • How to make a ring wit...
AN EASY PENDANT: • HOW TO MAKE A PENDANT ...
STEAMPUNK RING: • STEAMPUNK ring - turni...
⭐️ TOOLS, MATERIALS, RESOURCES:
Metal starter pack: • BASIC METAL for silver...
Most Basic Tools: • MOST BASIC SILVERSMITH...
Basic silversmithing tools: • Learn silversmithing: ...
Books to learn silversmithing: • Silversmithing BOOKS &...
DIY workbench: • Easy DIY JEWELER'S BEN...
How to fill a butane torch: • Learn silversmithing: ...
Sawing for beginners part 1: • Silversmithing For Beg...
Sawing for beginners part 2: • Silversmithing For Beg...
Soldering surfaces: • My SOLDERING SURFACES ...
Rotary tool and flex shaft attachments: • Pendant motor ATTACHME...
How to use jump ring maker: • How to make JUMP RINGS...
How to use ring bending tool: • Pepetools RING BENDING...
How to find gemstone sellers? Tips from JEWELRY MAKERS: • BUYING GEMSTONES: How ...
How to source gemstones, tips from lapidary artist and gem cutter, Mineral Rare: • BUYING GEMSTONES: How ...
How to source gemstones? SUMMARY & tips: • BUYING GEMSTONES: tips...
⭐️ LET’S CONNECT!
My website: stardustmine.art/
Etsy: www.etsy.com/uk/shop/Stardust...
Instagram: / stardustmine.art
Facebook: / stardustminejewellery
Pinterest: / thestardustmine
JUMP TO:
0:00 intro
0:14 supplies
0:46 sizers and mandrels
1:23 SIMPLE BANDS
3:41 OPEN RING
5:57 RING WITH BEZEL
#makingrings #jewelrymaking #goldfilledjewelry - Розваги
Enjoyed this video? You'll love this gold filled tutorial - ⭐️NO SOLDER!⭐️ua-cam.com/video/DUszjoUFSOM/v-deo.html
Also, please remember that gold fill is not the same as gold plating, check out my video where I described the difference: ua-cam.com/video/WBIPFw7buxM/v-deo.html
Check out the description box for links, tools, resources and more tutorials!
Thanks
I found a tip, if you want a size 6 for example, you start wrapping it in the mandril 2 sizes down for you to have the size you want because it will expand as you see. And if it to lsmall then you just stretch it, it's just to get the starting hoop for rings
AWESOME!! thanks so much for sharing this, it's a perfect tip!
I am so thankful you commented on the differences when working with silver and gold filled. Thank you for the clear instructions!
Wow you’re work is exquisite!! I absolutely love them. So therapeutic to watch💕
Thank you so much for this tutorial on working with gold filled. It is the first one I have found on the internet.
It's really cool to see you work silver and gold all the time.
The product is so pretty, too. The setting was also impressive.💖💖
This was my first video I watch from you!! I love it!! I love everything your doing. It inspires me to continue to pursue in jewelry making!! Can’t wait to see more of your videos!! Keep them coming please!!!
Very helpful. Love that little bezel pusher set too...
love love love this.
Wow! So lovely. So pretty
I so appreciate that you have made these videos! I'm just starting to make jewelry for myself and friends, and I wasn't sure where to start. I LOVE that you give the names of all the tools you use. Thank you!! Your jewelry is very pretty!
My pleasure! You are very welcome. I hope my videos are helpful and encouraging! Thank you so much for watching and good luck with your craft 🌞
that hammered ring is so simple yet sooo pretty!
Thank you so much Rachel! I really like this style, both in silver and gold colored metal :)
It seems so easy. Hope I could make the same. Wonderful !
I love your videos, they’re so incredibly helpful! I was wondering if you would of a favourite sanding/polishing tools. Of a start to finish in how you finish your pieces. I really struggle to get the effect that I would like!
Again and again you amaze with your super useful videos. Thank you a million times :)
Very helpful and well done!
This is a sign! I was just researching how to make gold filled jewelry and here you are!
awesome! I hope that my video was helpful! :))
Thanks for sharing, i loved to see how you work with it and end of results which was beautiful. I just bought my first soldering tools
That's awesome Janette! I'm very excited for you to get started. Good luck!
What a beautifull work, it is so delicate. Thanks for your videos. I didn't know that gold filled coule be soldered without changing colour.
You are very welcome, thank you so much for watching! :)
Very good video! Thank you!
I just found this video and I love it. Thinking about starting to learn how to do this ❤
You’re just lovely!!! Thank you 🙏
Yaaaay! This was the video I needed! Thank you beautiful Basia! 💖💖💖💖💖
My pleasure! You are very welcome :)) Thank you for watching!
Beautiful!
Wow this so pretty 😍
Thank you so much for this video! It's exactly what I needed.
I'm really glad it was helpful! Thank you for watching 🥰
This was really interesting to watch and you explained the steps very well. Thanks so much! :) I love your channel and you are a great teacher.
aww, thank you so much dear! Happy you think so, I appreciate it a lot 🤗
Loved it! Would absolutely love a tutorial on tube setting too, it’s something I’ve wanted to try for ages but too scared to!
Thank you so much Carrie!
@@TheArtOfMetalsmithing yes I would love to know more about tube setting and all the tools used
@@amberm2777 Nancy Hamilton has in depth free videos.
Yes!
How do you finish the bottom of the tube? Sorry my son changed name in UA-cam haha
Simple and elegant
Thank you for the beautiful tutorial! You are so talented!
You are so welcome! Thank you very much for watching and your sweet comment 😊
I'd really love to see more simple jewellery making videos like this one! ❤ These are soo beautiful, I really wanna start making jewellery too!
Thank you so much for great feedback! I will definitely make more videos with simpler, classic jewellery :)
@@TheArtOfMetalsmithing no problem! I can't wait! 😊❤
Sencillamente adorable. Me gusta mucho tu canal. No comprendo ingles pero igual aprendo mucho mirando tus videos!
Great instructions.. I also would love a tube setting tutorial..
Amazing tutorial, thank you!! 💖
You're very welcome! thank you for watching :))
Your creations are lovely!!!☺️☺️
Thank you! Glad you like them!
I have never done jewelry at home but I'm just loving to watch these videos n hope some day I get the courage to assemble all those tools and try my hands on something😍
aww, thank you so much! It means a lot that you think so :)) I hope that you will be able to get the tools in the near future and try it 😍
@@TheArtOfMetalsmithing 🥰🤗
nice work done by hands instead of machine
Love! Can you make more gold filled videos? 😁
Beautiful ring 😍💎 beautiful work👏🏻you are always explaining everything very well with every detail
Thanks for sharing💖 i'm learning a lot from you🙏🏻🌸
Thank you so much Justyna! 😊 I'm very happy you think so 🙏🏻
This is so cool! I never thought about how rings were made before
Thank you so much for watching! And I'm happy you enjoyed it :) yes, there's many steps and different stages, if you're interested in seeing how sterling silver gemstone rings are made, I have a video that shows the process and steps ua-cam.com/video/Env_RJd8S9o/v-deo.htmlsi=-z3K1L03r_NBOiXS
Hello from Mexico! Amazing! I love your videos
Hi Ivia! Glad you like them, thank you so much for watching 😊
Thanks for yr support 😊😊😊😊
Thank you for sharing ❤️
my pleasure! Thank you :)
Thank you for making a video on gold-filled!!
My pleasure! I know there aren't a lot of resources online, so I'm happy to share what I know :))
If you think of anymore gold-filled pretty please share, you’ll always have a heart from me
Love the ring and your tutorials. Very clear information. Thanks, thanks ❤❤❤❤❤❤❤❤❤❤❤❤❤❤😊please made more videos like this.
I really do need to make more like this one! I have several tutorials written down, will be making them soon :) Thank you so much love ❤️❤️❤️
Great video, very good demonstrations.
Very happy you enjoyed it, thank you! ❤️
I’m also new into jewelry making and your advices were precious many thanks for that
They look amazing 🤩
Love your work! 😍 I have a question… which metal is less damaged or more durable? Gold filled, brass or copper and the tips for keep it in good condition. Thanks 😊
Hiya Lady Stardust, yes more questions from me. Can you polish off the gold if you overdo it when shinning with very abrasive tools? would it not be better to mark the cutoff point of a ring for fitting a tube, then move 4mm along the wire, then cut, so the extra wire instead of being in your hand is still on the length of wire and available to use? It gets to me, we cut off the piece and put it in recycling when we could still use it. Using flush-cut cutters would help with cleaning up the ends prior to soldering. Less filing to do. Steve...
Beaaaautiful! 🌷
You have a very skinny fingers, lucky you, beautiful and highly skilled job, blessings and thank you for share your experience 😊
So beautiful :D
Thank you! 😊 Happy you enjoyed it :)
This is so amazing 🤩 where did you get the gold filled wires?
oh its look easy when u hve cmplte mterials like yours, bt i hve nt, i mde it w/ bsic fliers thts it 😻 its look amzing too🎉😘💍
خواتم
رائعة جدا جدا
وظريفة ومميزة وأنيقة
شكراً لك على هذا الفيديو المفيد والرائع
Nice,
This would be so nice to do on a date, taking a trip to make a ring, a certain small type of jewelry etc..just like how you go one a date to a pottery class..
I totally agree with you! Was thinking the same the other day, it would make an awesome date activity :))
Exquisite
hi!! i have been making rings for a little while now with gold fill but can’t seem to get rid of the crease/ solder line.. is this normal or should the ring look seamless? love your videos!! :)
Tqvm.
Hello,
Your work is just wonderful and you are very generous with your explanation, thank you.
Where do you buy your tube bezels from (like the one for aquamarine?
You are a star, thank you so much for sharing!
Could it be possible to share some basic tools to start with making rings?
Thank you for watching! :) As for the tool, please check out my channel, I have many videos about tools, and couple about most basic ones :) I also have some ring making tutorials. I will be making another step by step tutorial very soon, so stay tuned! :)
I am happy find you here; first time!^^
So happy you found my channel! I hope you will enjoy my videos 🙏🥰
Hey there how are you thx for the video so am wondering if that tube bezel works for flat back stones
Thanks a lot for showing the process. Do you put flux on your solder pick?
Love this video! How do get a match for the solder colour?
Hello :) that looks like great fun :) question: is gold filled solid gold, it’s so confusing eg; gold filled, plated, bonded etc etc please if you have the time can you tell me about gold filled and what it really means ?? I would be grateful :) (gal from oz)
Great video! Can I ask why you didn’t pickle the last ring after you soldered it?
Thank you very much for uploading the video! Can you tell me where I can buy the same gold filed wire! Thank you.
thank you so much for this video! i would realy like to lern this. Do i use easy, medium or hard solder for the birthstone ring? thx!!
Hi there! Thanks for sharing! Do you have a link to the bezel stone setting system?
Bellissimo tutorial grazie x tuoi tutorial sono bellissimi 💗💜🙏💟💞
Grazie mille! Lo apprezzo molto! Non parlo italiano, ma ho usato Google Translate per scrivere questo, spero che abbia senso ♥️☺️
Where did you get your bench peg please? I really like it😍
Hi, can I ask which pikl and flux gel are you using?? Or where are you buying these components?
If you cut gold filled wire like in the open ring, isn’t the brass core then exposed? Won’t it effect the ring?
I think you are the first ever person to show us how you solder gold filled metal. Do you think this could be done with chunkier pieces?
My pleasure! :)) I hope you enjoyed this video. I never done this with chunkier pieces, mainly because gold fill isn't ideal to solder and might tarnish over time. So if I do any soldering, it's usually just a little bit, like these rings
What is the best solder to use with copper rings? Is there one that isn’t silver or gokd? so that you don’t get a line? Is the one you use here okay? Would be better than the silver. Newbie to metal smithing 😊
So easy to understand even for a person that has never done it before. Thank you!
Glad it was helpful! It means a lot, thank you for watching! :)
Спасибо! Очень красиво! Где Вы покупаете золотую проволоку?
does the open ring tarnish over time since the core is exposed?
Lovely work! Thank you! I'm wondering about the open ring and the edges of the hammered area. Since the wire is gold-filled, won't the inner metal show through on the edges, and are they likely to tarnish along the edge?
That's very likely! Might require some extra cleaning from time to time
Where do you get your materials from
If you cut gold filled and leave it open will base metal show through?
Hey! Great tutorial! Just a quick question though.. How does the gemstone not fall through the center of the tube? Does it have a built in “seat”? Thanks!
Yes, there's a seat for it inside! So it sits nice and cozy in there :) Happy you enjoyed watching, thank you!
Can you please do an update to this video, working with gold filled? I know it’s been a few years, and I’m sure you have learned more ways to perfect it. Thank you.
Hi! I love this video as I struggle so much for setting bezel tube. You do not use any glue when you set stone that way? Is it secure? Please please let me know if you see this. Thank you once again.
p.s. your voice is so lovely!
Thank you so much for kind words, sweetheart! :) No, I don't use any glue in this setting. Just the pushers and making sure the stone is well secured. If the sizes are matched correctly (of the stone and bezel) it will be secure
ОТЛИЧНАЯ РАБОТА с золотом.❤❤❤❤❤👏👏👏👏💐💐💐
hi! what gauge is the one with the bezel?
I love these videos. I am currently on my own jewellery making journey and wanted to know if anyone has any advice or recommendations regarding buying gold filled supplies in the uk ✨
Hi! So happy you liked this video ❤ It can be tough when starting out and several years ago there weren't many places that offered gold filled supplies in the UK. Now, most of the major suppliers offer gold filled metal, so check out Cooksongold, The Curious Gem, Kernowcraft and Bellore Rashbel. I used to purchase my gold filled sheet from Rashbel and wires, chain and other components from the Curious Gem :)
How long on average does it take for you to make one of these? And how long do you think it would take a beginner?
Thanks for the video! Curious why you said sterling and GF need separate pickle solutions?
when I pickled silver with GF, silver got plated by the copper that as inside of the GF metal. It is wise to never contaminate the pickle which you use with silver by any other metal. Hope this helps!
After marking the wire length with the sharpie, could you use the saw to make the cuts and avoid the need to file?
absolutely! :)
What is the hardness of the wire you're using in this video?
Where to get the bezel pusher set? Thank you
I SEE YOU HAVE A BALL VISE!!! DID YOU GET ONE FOR ENGRAVING!?!?! That is goals for me atm!!!!!!! Xoxo
yaas, I got one, FINALLY!! It's a no-name brand and found it on Amazon. I was worried if I'm doing the right thing getting this one, but it looks ok. It has some flaws, but overall isn't bad! Hope you'll get one soon too!! xxx
AWWWE!!!!! THATS GREAT!!!!! IM SO EXCITED FOR YOU!!!! You DEFINITELY deserve it!!! I can't WAIT to finally get one! That'll be my next big purchase! Ill have to go check out Amazon... BLESSINGS!!!!💜💜💜
Enjoy& subscribed ^^
Thank you so much!! ❤️
Thank you so much for showing how to solder rings at home! Love your videos! I was wondering if this soldering technique also works for stainless steel wire mit 18K gold PVD plating? Can you help me with this? Thanks a lot!
I'm afraid I won't be able to give you advice on this, as I haven't worked with either of these metals before, sorry! I hope you'll be able to find an answer, good luck. And thank you so much for watching ❤
@@TheArtOfMetalsmithing Thank you for getting back to me on this :) No worries!
Thank you so much for sharing. Great works and tutorial ! I really love to watch your video channel.
I am wondering if the 14k gold surface of gold-filled wire would diminish or not.Could you tell me it is ok if I polish it by using file or sand?I am from Japan. thank you for your time! 🌸
Thank you! Very happy you liked it :) Gold fill is a bit better than plating, and lasts longer, however it still can be removed if too much sanding and polishing is done on the surface. It's usually best to avoid soldering with gold fill (and choose cold connections). But if soldering is required, it's best to solder very carefully, so there isn't a lot of cleaning required afterwards. Files might be too abrasive, so I personally prefer sanding paper and buffing sticks (or medium silicone attachments for rotary tool). It's a cheaper alternative to solid gold and more attractive alternative to cheap plating or brass. It does diminish over time a little, it won't last as long as solid gold, but I think it's still great to use this metal if you want to create gold colour jewellery of better quality than plating or brass! Hope it all makes sense haha 🌸🌞
@@TheArtOfMetalsmithing , love your video. Are you using hard, medium or easy solder? thanks
Where do I buy the pickle ?
Hello dear😊 I’m in love with your work, it’s amazing ! I was wondering where can I find all the gold filled materials? Maybe a website where I can check and buy all the supplies that I need. Thank you for your time 🤍✨
Thank you Giulia! :)) Glad you like it. I used to purchase my GF supplies in the UK, from Curious Gem :)
Thank you for your answer ☺️
Which is this wire?Where did you buy it from?