Hello. I watched your video and liked it very much. One thing I want to ask. How can you return all the values to default values i.e. how is the factory reset key combination????
Hi sir....we are using 3 phase with two meter...we use changeover to save the current bill as it will run on one meter for 15days and we change manually to other meter by changerover ...can we use this 3phase voltage protection...if yes how to setup sir
Dear sir,I am running 3ph.moter when my moter get overload and stop running at the same time this equipment cuts off power supply but it takes 30 seconds to recovery.I need 60 seconds for recovery sir where can i change value .I mean U3 or U7 or C2. Please reply me
I have bought 3 phase voltage protector. I was under impression that each phase can support 63 amps, but now I see in this video you mentioned 63 amps is total of 3 phase. Can you please confirm about this ? If I run the device in Async mode will it support 63 amps per phase ?
@@amicikartso in this case (loss of one phase) can we divide one of the two remaining phases wire into two connection wires and then well get three wires of input....so i think it will work fine? Plz aswer
@@amicikartbut you mentioned voltage limit max 300 volt but in Tubale electric line voltage goes more than 300, will it survive if we have voltage between 300-400 range for tubale motor
In this voltage protector this will show the voltage N to Live wire show that the voltage max 300V. But tubale motor work on Live to Live wire show that the voltage 300-400V. Live wire voltage is 220V AC and N wire voltage is 0V.
in my three phase connection, i am using this devise, but the problem is, if any one line has no supply, this devise disconnect all lines or stop all power supply
Namaste sir, can it be used for agricultural motor pump sets. The price is high. Can it be found in our Telangana? If you can tell me the contact numbers of the dealers in Telangana.
@@amicikart lekin Amazon se lete time usme mention tha ki, auto connect ho jayega, isiliye liya tha..kya isse kum mein phase auto connect kisi aur brand ka hoga kya....
ये प्रोडक्ट अपग्रेड हो गया है। ये अब सिंगल फेस की तरह तीनो फेस पर काम करता है इसमें एक फेस चलेजाने पर एक फेस कोही बंद करता है। और थ्री फेस की तरह काम करता है इसमें एक फेस चलेजाने पर तीनो फेस बंद कर देता है। ये दोनों के लिए सेटिंग चेंज करना पड़ता है। Please connect with us at 9809709898.
Thank you for your interest Sir. You may buy this product from our Amicikart website and also from Amazon India. Links to both are mentioned in the Video Description.
Sir our latest model support this feature...some changes in the setting is required.. please connect with us at 980 970 9898 our tech team will guide you in that respect
By working the Voltage Balance protection settings . However if by any chance you're facing any further issues, Please call us at our Tech Support at 9809709898 between 10AM-6PM
sir SYN and ASYN stands for synchronus and asynchronus mode which means you can make use of the product as single -3phase protector or as three-single phase protector
Sir ASYN and SYN stands for synchronous and asynchronous mode which means you can make use of this device as 1-three phase protector or as 3-single phase protector
I'm trying to listen but I'm not getting the explanation.. I think he is explaining for his native people.. Anyway, my question is to part is V, V, V for voltage, second part A. A. A, let's say the motor takes 8A, do u hv to set the amperage and how do u set plz..
![Smart Voltage Protector Best Settings, Display Explained, Hidden Features [Hindi]](http://i.ytimg.com/vi/eMyWz75bqnE/mqdefault.jpg)
![Smart Voltage Protector Best Settings, Display Explained, Hidden Features [Hindi]](/img/tr.png)
Very good explanation about
Thank you! I'm glad you found the explanation helpful!
Can it be use to 3-phase to single phase automatic switcher?
This is the 3-phase over and under voltage protector. If you want phase switcher tis is the buy link. www.amazon.in/dp/B0CZDXXVKQ
Do you have automatic 3 phase to single phase selector video explanation?
Automatic 3 phase to single phase selector video explanation not available.
Kiya ismai bijli units bhi set kar sakte hai example just set 100 units fir jaise 100 units fir automatic phase change ho
No Sir.
@@amicikart Aesa koi hai kya kyoki tomzn company ka hai already isne review kya hai ua-cam.com/video/mv988qdtAS0/v-deo.htmlsi=aTg_eD1lNoy4v1mK
how to change to ASYNCHRONUS mode , can you please explain.
Please contact at 9809709898.
I have lift inside home, i want to shut off lift, when single phase loss. What settings needs to be done. ASY OR SYNC
Please connect over call at 980 970 9898 our tech team will guide you
Sir very nice.
Mera saval..?
Kya 415 volt pe kam krega.mere pas 3 ph sammar h
No sir
Works for me.
415 is line to line voltage difference.
240 is line to neutral.
Hello. I watched your video and liked it very much. One thing I want to ask. How can you return all the values to default values i.e. how is the factory reset key combination????
No sir there is no such option
If we change from SYN to ASY, what about the phase loss and phase imbalance protection, still it works?
It will work like single phase.
Hi sir....we are using 3 phase with two meter...we use changeover to save the current bill as it will run on one meter for 15days and we change manually to other meter by changerover ...can we use this 3phase voltage protection...if yes how to setup sir
Please contact at 9809709898. We will explain of this product.
Dear sir,I am running 3ph.moter when my moter get overload and stop running at the same time this equipment cuts off power supply but it takes 30 seconds to recovery.I need 60 seconds for recovery sir where can i change value .I mean U3 or U7 or C2. Please reply me
All details are mentioned in the video sir along with recovery time setting...for any query after that please call us at 9809709898
I have bought 3 phase voltage protector. I was under impression that each phase can support 63 amps, but now I see in this video you mentioned 63 amps is total of 3 phase. Can you please confirm about this ? If I run the device in Async mode will it support 63 amps per phase ?
Per phase its 63amp
@@amicikart Thank You for confirming
Same here. Thank you for confirming.
Sir after installation voltage for all 3phase are shown properly.but load ampere showing 0 only. What to do?
Sir please connect over call at 980 970 9898
Can I use this with gelco EL+MCB 63 ampere ? If yes how to install
Yes use kar sakte hain..for installation procedure please call us at 9809709898
Can we use this product in Johnson lift
Sir 14kW tak ke products pe use kar sakte hain...
hello Sir
i want to use this for submersible motor with open neutral
Will this work???
Sir neutral required in input connection whereas in case of output neutral connection is not required.
if one phase goes off then will the other 2 phases continue working ?
no sir... it works when all 3 phase are live
Very good function
@@amicikartso in this case (loss of one phase) can we divide one of the two remaining phases wire into two connection wires and then well get three wires of input....so i think it will work fine? Plz aswer
Kindly share the manual the dimension of relay
Please contact at 9809709898.
Can we use it with 7.5 hp Tubale motor
Yes you can use.
@@amicikartbut you mentioned voltage limit max 300 volt but in Tubale electric line voltage goes more than 300, will it survive if we have voltage between 300-400 range for tubale motor
In this voltage protector this will show the voltage N to Live wire show that the voltage max 300V. But tubale motor work on Live to Live wire show that the voltage 300-400V. Live wire voltage is 220V AC and N wire voltage is 0V.
Amicikart 3 phase wifi smart energy meter ka installation video upload kariye.
Ok sir...hum koshish karte hain.meanwhile aap iska installation process humare technical team se samjh sakte hain... number is 980-970-9898
What is Ud error, and what to do about it, because many times during night the power cuts off and the device displays Ud
Please call us at our Tech Support at 9809709898 between 10AM-6PM MONDAY - SATURDAY
Having same issue. Did you find any solution of it
Please call us at our Tech Support at 9809709898 between 10AM-6PM, Monday - Saturday
in my three phase connection, i am using this devise, but the problem is, if any one line has no supply, this devise disconnect all lines or stop all power supply
This devise is upgrade with new features it will work like one phase. You need to change the setting SYN to ASY.
Very Helpful
Glad it helped
Gadites voltage protector 3phase shows error what to do?
Sir we are not sure about other brand products
Kya isko 3 face se singal face Ghar ke upkaran chala sakte hai
Sir, we have just upgraded this product which comes with this feature
Namaste sir, can it be used for agricultural motor pump sets. The price is high. Can it be found in our Telangana? If you can tell me the contact numbers of the dealers in Telangana.
No dealers in Telangana. You can buy online. www.amicikart.com/products/3-phase-voltage-current-protector/450878000000678138
Bhaiya agar 1 phase ka light chala jata hain to, ye auto reconnect ho jayega 2 phase se, ya 3rd phase se...
Sir wo dura product hota hai i.e. phase selector. Please check www.amazon.in/dp/B0CPY5K14F?ref=myi_title_dp for your requirnment
@@amicikart lekin Amazon se lete time usme mention tha ki, auto connect ho jayega, isiliye liya tha..kya isse kum mein phase auto connect kisi aur brand ka hoga kya....
Dry Run (Under Current) Protection hota ta 3 phase motor ke liye bahut hi useful product hota.
bilkul sir...
Sir 2 phase ke liye koi product nhi he kya
no sir
Can we use it in DB panels upto 80 KVA load???
No Sir
Kitne KVA Tak lod Chala sakte hai Volteg Protector Par
63A * 240V = 15KVA on each phase
Sir agar neutral fail ho jayga to ye off ho jayga k phase to phase hoga pls replay
Sir .... off ho jaega
yeh ghar ma lgy USB ki working ko effect to nahi kry ga ??
Not clear with your query..... it would be better if you could please call us at our Tech Support at 9809709898 between 10AM-6PM, Monday - Saturday
Dear sir
Koi esa protaction device he jo 3 phase pe bina nutral kaam kere
www.amicikart.com/products/3-phase-over-under-voltage-relay/450878000000041443
Agar 3 phase me 1 face drop ho to ye divice off ho jaata hai crunt pass nahi karta mene Aaj hi lgaya hai
ये प्रोडक्ट अपग्रेड हो गया है। ये अब सिंगल फेस की तरह तीनो फेस पर काम करता है इसमें एक फेस चलेजाने पर एक फेस कोही बंद करता है। और थ्री फेस की तरह काम करता है इसमें एक फेस चलेजाने पर तीनो फेस बंद कर देता है। ये दोनों के लिए सेटिंग चेंज करना पड़ता है। Please connect with us at 9809709898.
Bhai mene untold liya tha par out put q nai arrai
Please call us at our Tech Support at 9809709898 between 10AM-6PM, Monday - Saturday
440 V Me Kharab Hoga Kia
230 V Me Otocut Ho Jayega
No
How can i purchase it. I am in kerala wayanad.
Thank you for your interest Sir. You may buy this product from our Amicikart website and also from Amazon India. Links to both are mentioned in the Video Description.
Even the new model doesn’t support single phase loss?
Sir our latest model support this feature...some changes in the setting is required.. please connect with us at 980 970 9898 our tech team will guide you in that respect
Kindly provide a manual pdf file for 3 phase
For user manual Please contact at 9809709898.
5hp sigal phes motor with home suply kase chalega
Please call us at our Tech Support at 9809709898 between 10AM-6PM
Each phase 63 amp load capacity or three port total 63 amp?
Each Phase
न्यूट्रल कट में ये बंद पडेगा क्या
ha band rahega Sir
Ye Kitna kilowatt ka hai
13kilowatt
Rate ketina hai
Please click on the buying Link-s in the Video Description to check the Rates
Ud or Uh error kaise thik hoga
By working the Voltage Balance protection settings . However if by any chance you're facing any further issues, Please call us at our Tech Support at 9809709898 between 10AM-6PM
@@amicikart Thanks for support
@@pawangrewal626 hey can you tell how to fix it
Ud error code ka matlab ?
Voltage-imbalance Protection.....indicates fluqtuation
@@amicikart what to do about it? The device cuts off the power every other day and like today every 10 minutes, please guide
YOU HAVE NOT SHOWN THE WIRING DIAGRAM WHTHER IT SHOULD BE CONNECTED AFTER RCCB OR BEFORE RCCB
AFTER RCCB
Bhai output q nai arai
Please call us at our Tech Support at 9809709898 between 10AM-6PM, Monday - Saturday
rEL SYn, this for what?
sir SYN and ASYN stands for synchronus and asynchronus mode which means you can make use of the product as single -3phase protector or as three-single phase protector
Sir ASYN and SYN stands for synchronous and asynchronous mode which means you can make use of this device as 1-three phase protector or as 3-single phase protector
@@amicikart during settings last part is rEL SYn
I'm trying to listen but I'm not getting the explanation..
I think he is explaining for his native people..
Anyway, my question is to part is V, V, V for voltage, second part A. A. A, let's say the motor takes 8A, do u hv to set the amperage and how do u set plz..
@@amicikart during the setting, after C5 setting finish, next is rEL Syn, what is this ?