Hello bro i have a small doubt if the bulb is manually on through the switch can i turn it off with bluetooth and vice versa and i dont know how to wire it that way can you tell me how to do that if you know plz
Plz I don't have a PC . how can I upload the code using my android phone. I tried with arduino droid IDE app on my android phone and all I could get is a blinking relay and light connected to the relay . Why is it not turning on and off through Bluetooth controller app on my phone ? . plz assist
your outcome is different to your circuit diagram, in your diagram the arduino is powered by the 220V AC but in your actual circuit it's powered by 9V DC. Is there any chance of getting the diagram with the physical switch and 9V DC adapter?
Hello, I am from Indonesian Can I ask what happened when we turn on the light with Bluetooth and we disconnect Bluetooth with Arduino? Are the light will turn off?
I'm pretty sure you can. It seems both the switch and Arduino is connected to the same terminal on the light bulb, so arduino can turn on the lightbulb, regardless if the switch is off. U could think of it as a OR gate Problem is, if the light switch is on, then it cannot be turned of via the app, it needs to be done by the light switch. And same if the app is on, the app is only way to turn off.
![Arduino UNO Smart Home Lighting Simulation w/LEDs, HC-05 Bluetooth Module + mBlock 3 [Tutorial]](http://i.ytimg.com/vi/DwDVVhgyakw/mqdefault.jpg)
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Nice Dear , tried with many video but this one really solve my issue. thanks
Thank u
Bro is it working with this video plz reply me
Great tutorial. How would we connect this in a way that allows switching it off via bluetooth if its manually switched on?
සුපිරි වැඩක් bro😃
Thank u bro
Wonderful video Thanks Brother
Thank u bro....
Thank you, This video is a useful, informative, simple and clear description.
Thank u very much .....❤
Did it work for you
when light on from manual switch possible to reflect in app?
better to use 3-way switch so that you can turn on/off thru phone or switch. in that way, the logic will be like XOR.
nice👌
නියමයි සහෝදරයා
ගොඩක් ස්තුතියි සහොදරයා
@@slideas112:47
13:48 In the diagram here, shouldn't the relay contacts to which the 220 volt lamp is connected be COM and NO? Greetings.
Yes bro
perfect and lovely
How to increase buttons in Arduino bluetooth control App .only 6 are provided.
Give me answer sir
Wow. Learned how to wire a light bulb.
turn on switch don't switch off,
stay on.
turn off from u'r handphone.
is it safe?
niyamai kollo
Thank u
Bro you are using Arduino uno r3 with dip atmega328p
you are a good teacher. by the way, can you teach me how to make arduino programing
Welcome and following my channel .....
Bro can I use hm 10 blutooth module instead of hc 05 and need to make some changes in code please reply
Hello bro i have a small doubt if the bulb is manually on through the switch can i turn it off with bluetooth and vice versa and i dont know how to wire it that way can you tell me how to do that if you know plz
Great video
thank u soo much
Can this work with HC 04 Bluetooth module
Plz I don't have a PC . how can I upload the code using my android phone. I tried with arduino droid IDE app on my android phone and all I could get is a blinking relay and light connected to the relay . Why is it not turning on and off through Bluetooth controller app on my phone ? . plz assist
Can i use it over long distance???
everything is good but light doesn't controlled with bluetooth. what is the reason? what can i do to make light controlled by bluetooth app?
Jumper wires
May be that you did not connected the system correctly
Bulb 💡 glow chythooo????
Reply
So what if u turn on with the switch and tried turning on with the mobile app
can I use different switch?
your outcome is different to your circuit diagram, in your diagram the arduino is powered by the 220V AC but in your actual circuit it's powered by 9V DC. Is there any chance of getting the diagram with the physical switch and 9V DC adapter?
th 220 v is the output of the light bulb, it has relay so it won't supply the Arduino with 220v
Thank you
Hey .
Please tell me the code will be same for different Arduino right
Mine is slightly different so this code will work?
Thank you Bro, one trick that can fullfill my 5-6 hr, please remove RX and TX pin before uplode code
Thank u
Can i built this project by myself,using this video??
Hello, I am from Indonesian
Can I ask what happened when we turn on the light with Bluetooth and we disconnect Bluetooth with Arduino? Are the light will turn off?
If the bulb was lit at the time of disconnecting the bluetooth, it will continue to be lit in the same way. If the bulb is off The bulb is still off.
Can you please send this programing link ?
The link given by you is not opening
Code in discription ...download
Define Pin 13. And I think the Circuit is very easy.
Hello sir please how to upload aurdino code please provide information step wise
Please reply sir 😊😊
Can we control our room c link fan by Arduino Uno by proper circuit structure?
Can we switch off the light using phone eventhough the switch button is on?
I'm pretty sure you can. It seems both the switch and Arduino is connected to the same terminal on the light bulb, so arduino can turn on the lightbulb, regardless if the switch is off. U could think of it as a OR gate
Problem is, if the light switch is on, then it cannot be turned of via the app, it needs to be done by the light switch. And same if the app is on, the app is only way to turn off.
What is the component of 220V Ac plz tell me name of this component
I followed the video but my bulb didn't glow what to do
my bluetooth module is JDY-31 how can i do to pair it.
Will you provide the material info
can we still control even we going out...that far from home
No we can't cause Bluetooth range is not so far, for that a wifi controller need to installed in your home.
The Code file is not opening...😥
Bro सही से open कर
What if we turn ON both the Switches ( Mobile and Manual) ?
Bulb on
Can i do this project with arduino nano??
Yes of cose
Do you have coding if we want to implement voice control for this exact project?
ua-cam.com/video/hkOUWIv6v-w/v-deo.html
Hi all, I'm unable to open the Arduino code link, can you make it available in another way?
E malli please ?
Bro i need the correct code
Hi there gm is this relay module without optocoupler?
GM ,yes without optocoupler.......
@@slideas1 any vedio about to control geyser according to your timing and temperature
What is the exact price
i have bought 12 v i can observe the green light turning on and off.but bulb is not glowing i checked connection
Same.problem brother, have you resolved it yet?
Bro ye program nano me ho jaega
Sir, it is okay if I use HC-06 Bluetooth module?
Yes
@@slideas1 Thank you sir, I subscribed to your channel
@@allsongs1729 welcome
Hello, your given link for downloading the code isn't working. Please share the code.
Bro will it work properly
I mean the output comes or not plz reply me
Plz reply me back bro because iam doing it as my final year project diploma 😅
When we are entering password for Bluetooth
It is going in saved not connecting.. please explain
What if we don't use adapter ?
Es un interruptor de 2 vías ???
Unfortunately not. If one is on, then it cannot be turned off by other ie AND gate
Can i have a Diagram of this project Sir ?
can it be any codeing issue
hey which arduino are you using?
arduino r3?
Yes arduino uno r3
How much is the total price of components?
What if I turn the light on with Bluetooth and turn the switch off ? Will the light be on or off ?
This way the bulb does not turn off.
There is analysis in my uno r3 board , perhaps I had not been completed my project 😢
Is Unor3 is suitable for this project ?
hello, I am not able to open the arduino code link, can you make it available in another way?
Bro can we turn on 4 bulbs
Yes ,4 relay module and modify code....
@@slideas1 thanku very much
Sir the code given in the discription gone expired an alternate code for it ?
Send mail
@@slideas1 i don't have mail please send the code in comment section
Can you give the link of application that you are using
From where i can order this model
How can we connect multiple lights in this?
Use a model with several relays
But do we need to change the coding?
codeing any thing we have to change a bro
Bro nidhehara program vunthe naku petu link petu bro
Complete circuit was working but had a problem with the bulb it's not glowing
Have you resolved your problem? Regarding the bulb not glowing??
Do you face any problems when you upload your code?
relay module is not letting current to flow on bulb
Great video sir, can I have a code, please?
Thank u...code in discription ..download ...
Hello sir can i get a new programing coding link , the link on description is expired
char val;
void setup() {
pinMode(13,OUTPUT);
Serial.begin(9600);
digitalWrite(13,HIGH);
}
void loop() {
if(Serial.available()){
val = Serial.read();
Serial.println(val);
}
if(val=='1'){
digitalWrite(13,LOW);
}
else if(val=='2'){
digitalWrite(13,HIGH);
}
delay(100);
}
Aiye oya Arduino uno Programming karala den නැතිද ..oyata permanent කළොත්..
So technically your neighbor can control your devices if he's connected to your Bluetooth?
Pls code 8ch relay panel.
What is the name of the wires you used to connect the relay module, light bulb, and switch?
Jumper cables
Three categories
M-M
F-F
M-F
Three bulb lagar kar ek video bana dijiye
May I ask did this system can connect more than 3 bulbs? did you have some examples to refer to?
No bro you should have extra relay modules. But it is possible for 3 bulbs at a time to work with single relay module
There is a fatal error in that you are powering the lamp from 220 volts from the relay and the switch side
cAN I RUN A CIELING FAN INSTEAD OF BULB?
Yes definitely
How much distance it can work
20 - 30 meters
Thanks 👍 bro
How much arduino and relay?
What is total cost of this project
What if I on both of them
Hir sir...can add fan in this project...how it in circuit and the coding....please explain...
Please reply
@@kulesiswarkulesh2032 yes can
@@slideas1 how I contact you sir...
Can I get your email...
@@kulesiswarkulesh2032 following my face book page..👍👍👍
where is project report sir
What about that wires ... What are they called....
Jumper wire and auto wire
bro how much volts relay module
This 12v relay ..if u want u can used 5v relay module
Could you please show step by step on how to program the auduino
Good idea ...👍
you can also just download the code
Price kitna hai bhai ?
how should we erase old command
Program kese Lena hei
Bro program kinda description lo ledu bro okasari program link petava bro plz
What happen if both switches and bluetooth turn on
Even then the bulb is on
it looks like a 3way switch
the green is also like low voltage
can you give the buy link
Free
hello bro the code is not working
circuit diagram?
do you have the code for arduino?
Code in discription ....download ..