@@IndoCropCirclesOfficialit's because the clean surface reflects more light, overwhelming the dim light from behind like a one way mirror. If you shined a bright light on on the other side it would look transparent again.
@xrotatuilx Yes, it is called carousel because it is a rotating part of the CNC machine, and it could be manually or automatically operated, but it is still part of the CNC machine system.
@@gilbertogilberto4588eles tão falando de escapar o aro do torno, eu ja trabalhei com torno cnc e se a peça escapa é muito perigoso, mas lá os tornos são fechados, aí tá tudo aberto.
Schön wäre es mal die fertige Oberfläche zu sehen. Der Drehstahl ist mit nur 1 ! Schraube befestigt und ragt zu weit aus.Die Maschine ist eine gantry-Bauweise eine sehr steife Konstruktion aber durch die unzureichende Werkzeugbefestigung wird der Vorteil leider nicht genutzt. Am besten einen schwingungsgedämpften Werkzeughalter nehmen und möglichst kurz einspannen und mit mindestens 2 Schrauben befestigen. Es gibt spezielle Schneidplatten fürs Glanzdrehen von Felgen, die haben eine "Schleppschneide" heißt der Schneidenradius ist kein vollkreis sondern polygon, hat den Vorteil dass man bessere Oberflächengüte bei höheren Vorschub erzielt.
@fwarleader If he made it a little longer at the end part and you enjoyed the beauty of the end result and satisfied with it then you probably wouldn't return to view it again.
I need to do that to my factory rims on my 02 Chevy. It's a old farm truck so I'm trying to keep it factory on everything. Country driving dings rims up a lot.
@@DavideMolinaro-dj8tv Hardness of diamond? No. Its an HSS tool tip used on Aluminium. Diamond is the description for the surface spec finish, when compared to a surface roughness gauge (Ra) thats all.
I could watch this for hours! It's like magic seeing those wheels get all nice and shiny again. Makes me appreciate the hard work that goes into it. Plus, the sound is kinda calming too! 🎥✨
Its spins fast enough that the machined finish is reflecting back as if it is a solid reflective surface and obscure your ability to see through the wheel.
Not bad but I would had turned around put it on a cnc lathe with a granular diamond wheel powered bring wheel and speed travel it to create skip chatter looks amazing almost like the broaching you see on custom bolt actions
Omg!!! That looks soooo much safer than that dam Miltronics I used to use!!!! All I’ll say is, if you’ve ever used the vertical clamp one and didn’t secure it properly and didn’t close the door, pray your torso unsent exposed😂😂😂 Good ol Keystone Automotive industries 😂😂😂
Thanks for showing final results for 10 seconds😊
😂😂
.10 seconds
😂
As a car guy , I gotta admit this is mesmerizing...
Кактебязавут
❤
It kinda sounds like 🗿🗿🗿
M. @@ЕвгенийИбатов-л1ш
@@Rivet_Head242 nobody cares that you think you're a car gay.
Pretty amazing how it went from being see-through to looking like a solid object just from the shave
No is not, the black color just became aluminum bright, but coz the hi speed make it looks solid but is not, look at at the end and pause it
@@IndoCropCirclesOfficial.. he said “looking like”.
@@IndoCropCirclesOfficial He knows that, read the comment dude
@@IndoCropCirclesOfficialit's because the clean surface reflects more light, overwhelming the dim light from behind like a one way mirror. If you shined a bright light on on the other side it would look transparent again.
Black reflects less light a mesh becomes near invisible when painted black
I am a cnc programmer
I love cnc work
Even i am retired now but I have a lot of time for ir ❤
Привет вам от оператора ЧПУ станка AMADA!
Exactly mate my as well 27 years
CNC machining is such a wonderful skill that it's magical
Где тут ЧПУ? Простои механический станок. Я на таком работал. Называется "карусельный".
@xrotatuilx
Yes, it is called carousel because it is a rotating part of the CNC machine, and it could be manually or automatically operated, but it is still part of the CNC machine system.
Bruh he put the wheel on and ran a program I don't see the skill in that
@@theairaccumulator7144 exactly, and for any CNC work this is so simple as breathing
not everybody can use CNC machine you have to be brain IQ to be good programming CNC machine. respect very good IQ 🖒
Esse equipamento tira todos os arranhões da roda , muito bom 👏👏👏👏🇧🇷
😅😅😅
😊
Da sua roda tira mesmo kkkkk
N😂❤ooi
youtube.com/@danishalivloger?si=dnIBIucJtAJhrENU
With personal bitterness, as a retired Hand Engraver & Machining, I still profess that this, CNC Machining, is as cool as heck! 😃❤️🩹👍👍
I feel the same way you do because of all the businesses that have closed down I'm forced to be retired engraver😊
😊9w😊❤w😊😊
😊9w😊❤w😊
😊9w😊
Did that for five years. Hope that thing never comes unclamped
Afina muito o material , fica comprometida a segurança.dos ocupantes do veiculo
@@gilbertogilberto4588eles tão falando de escapar o aro do torno, eu ja trabalhei com torno cnc e se a peça escapa é muito perigoso, mas lá os tornos são fechados, aí tá tudo aberto.
@vidalokadorapnaciona why can't it be behind a strong transparent barrier such as a fence or thick plexi.
@@sharifnasser7635 it should be behind a steel door. If that wheel came loose it would kill someone
That's what I thought, I bet this is in a country health safety is non present @@michaelcoonce6694
I ran CNC mills and lathes for 15 years and enjoyed it.
You are lying.
@@basimahmed-be6gjwhy? 😄
@@EK-fy8hdask him
Яяяяяя@@EK-fy8hd
I have 25 and i love cnc
I am a CNC programmer and a machinist, nice finish ! Keep it up the good work !
Beautiful! What a pleasure watching the results ❤
that's trippy nice job :)
I've never seen that before, that's dope.
I just realized how cool solid wheels would look on a modern car...
Beautiful finishing!.
Thank you! 😊
Schön wäre es mal die fertige Oberfläche zu sehen.
Der Drehstahl ist mit nur 1 ! Schraube befestigt und ragt zu weit aus.Die Maschine ist eine gantry-Bauweise eine sehr steife Konstruktion aber durch die unzureichende Werkzeugbefestigung wird der Vorteil leider nicht genutzt.
Am besten einen schwingungsgedämpften Werkzeughalter nehmen und möglichst kurz einspannen und mit mindestens 2 Schrauben befestigen. Es gibt spezielle Schneidplatten fürs Glanzdrehen von Felgen, die haben eine "Schleppschneide"
heißt der Schneidenradius ist kein vollkreis sondern polygon, hat den Vorteil dass man bessere Oberflächengüte bei höheren Vorschub erzielt.
Exactly
Are you available for paid consultation?
@@johntaylor8271
I worked in cbn/pcd cutting business some years ago, maybe i can give you some information or contact
@@nullkommanix7372 are you in the US?
the skill of this .... cutter ---- is truly amazing. he presses the "start" button. but make sure it is CLAMPED!
Man I watched this like 7 times. Wished it was a little longer at the end to get a good look at the end work.
If he made it a little longer then my guess is that you watched it only once.
@@hmjeon8609 Why would you need to guess when I said I watched it like 7 times? What are you guessing about? Not sure what your point was.
@fwarleader If he made it a little longer at the end part and you enjoyed the beauty of the end result and satisfied with it then you probably wouldn't return to view it again.
@@hmjeon8609 Oh I see I misunderstood, you are right absolutely! LOL
AS THE LATHING CONTINUES IT LOOKS LIKE IS MAKING LIKE AN ALUMINUM DISK AND VOILA A BEAUTIFUL AND RADIANT LOOK!.
Wow that is amazing dude that fly still standing on top of that rim you didn't move a bit Well he does look a little dizzy
Precision technology !!!😊❤
Agora ficou bom mais leve e mais fragio, continue
I need to do that to my factory rims on my 02 Chevy. It's a old farm truck so I'm trying to keep it factory on everything. Country driving dings rims up a lot.
That's looks so good
Il y a rien d'exceptionnel 😮
Le quotidien d'un tourneur !!!😊
Bien dit. Il veut sans doute changer la couleur de ses jantes ?
Not everyone is a turner, it's new to everyone else. I had no idea this existed, until YT.
👍🏿@@jeffhale2278
That's just beautiful Harriet
Rotate And "BALLANCE" On a nother level!!😮😮😮😮😮😮
Diamond turned reminds me of the 80s. Funny how styles are cyclical
ASMR shit right there!! As well as visual pleasure! Nice thank u for doing this-Roman
Velocidade e avanço absurdos!
What’s is this great machine and great operator
Just had my AMG rims on SL refinished, I never knew how it worked, didn't care, just make them pretty and shine again. 👌🏿
What a super cool video how enlightening can you be? Wow, what is technology doing anyways🙃🙂
That looked so satisfying 😌
So satisfying 😮
@@paulwincott2987 thx buddy
Que maravilha q máquina é essa
Beat me to it
How to adjust how much pressure to apply? Is it automatic?
No pressure, you cut out only 0.05 of millimeter,the hardness of diamond create a mirror surface
@@DavideMolinaro-dj8tv
Hardness of diamond? No.
Its an HSS tool tip used on Aluminium.
Diamond is the description for the surface spec finish, when compared to a surface roughness gauge (Ra)
thats all.
Yup its just surface cleaning
My work diamond turn next step is polish to mirror like finish!
My wheels are very similar to this one. Where do you get this done at ?
Dikit meleset pisau bubut ,pisau itu bisa patah total dan terlempar berkeping"..sunggu ukuran posisi pisau ny akurat..
Love these videos!
I could watch this for hours! It's like magic seeing those wheels get all nice and shiny again. Makes me appreciate the hard work that goes into it. Plus, the sound is kinda calming too! 🎥✨
Its spins fast enough that the machined finish is reflecting back as if it is a solid reflective surface and obscure your ability to see through the wheel.
That's so freaking cool
Topzera. Muito bom mesmo! Máquina de fazer dinheiro 💰🥂
I liked it better the way it was, is this flat finish something that’s in style now?
I did it for my rim to make it look nice after some scratches. It rusted badly. Is there an after coat after this to prevent rusting?
If Chuck Norris wasn't a human SuperHero, he'd be doing that
he also does this while saving planets
Wow. That's so cool.
“You give it you gotta be able to take it” 👌
Looked so different 😮
Not bad but I would had turned around put it on a cnc lathe with a granular diamond wheel powered bring wheel and speed travel it to create skip chatter looks amazing almost like the broaching you see on custom bolt actions
Le bruit me fait penser aux JT9D 2A des premiers 747-100 a plein régime 🎵👍
That bit is impressive im surprised it doesn't go flying off after breaking
That's cool! Thanks for sharing 🤘
Doesnt this affect wheel balance?
@@vincentco7995 no
My intrusive thoughts kept telling me to put something in there
Der macht sogar den inneren Kreis..
looks good
Used to run airplane wheels. Had a Grob that ran a forging to completion ready for surface treatment
Did this for 7 years at titan wheel corporation. I did it on big earthmover rims . Nice actually saw one of these come off it’s scary
Transparent to opaque
is it safe?
Not cnc. But a tracer type vertical lathe.
50 years experience.
Cnc - computer numerical control. any machine can be made CNC
Don’t matter Charles . Who gives a fuck 100 years of experience ❤
@@kuustiestright, this one hasn't been made so
@@jonothankaplan why? I can make limit switches for reading the surface, put a controller and stepper motors, which will make a CNC machine out of it
@@jonothankaplan you can't know this because too little is shown. so drawing any conclusions is wrong
It’ll take some time.. but this short had me bobbing and weaving!!
It's still out of balance❤❤❤❤
Super machine!
Awesome mechanical engineering.
I wish I could see them before and after
The tool only hold by one screw is asking for a disaster to happen. Also having the tool hold by 2 screws would remove the vibration in the finish.
الشغل دا لو موجود فى مصر هياكل دهب
Mad! This lathe machine is great.
二人とも現役時代からスーパースター…
この共演はやばかったです🤗
So what does something like that cost per rim?
its part of the process not an aftermarket stupid buy
Some 1 put me on game what's going on in this clip 💯
I had this done to my car wheels but what they don't tell you is that each spoke of the machined wheels becomes slightly thicker, between 1 to 1.5mm.
I need this on My wheels!
Holy shit that is amazing.
It makes melody played with electric guitar
This was smooth
🤔 en México, donde harán ese trabajo...mis rines lo necesitan...🛞
Does it speedup in center?
Absolute gorgeousness
The hole remains the same, but why does it become opaque when rotating?
Люди придумали столько удивительных технологий но до сих пор жрут друг друга.😊
From a normal wheel to rust magnet thankyou for your service😊
（Japanese）
一番最初。ソ連感が否めないw
（English）
The first one. I can't deny the feeling of the Soviet Union lol.
I'm sorry if it's taboo.
So wobbly though
Can you show how tf it looks in the end?!
That sounds like a church service starting up... And ending wow😊
How much would it be to do all four rims they are 24 inch
India me kab aayegi ye adbhud machine
@@GARRYSTUDIO Availble to bhut time se hai par yr log alloys vgara pe kamm nahi krte
So that's how they do it! Who knew?
How much would this normally cost
Wondering if I put my 4x4 on axle stands in gear I could do this on my drive to cut cost.. Would a good wood chisel work?.. Bonjour
OMG that guy must have like a 1000 million IQ!!!!!
Omg!!! That looks soooo much safer than that dam Miltronics I used to use!!!! All I’ll say is, if you’ve ever used the vertical clamp one and didn’t secure it properly and didn’t close the door, pray your torso unsent exposed😂😂😂 Good ol Keystone Automotive industries 😂😂😂
Wish I was the old guy standing there turning the controls saying "Just started yesterday."
How much cost cnc machinr? Model?
That is ASMR for me
What about rust after this.?
Where are u located?
amazing
Premiumtirewheel