My man just did it for 2key hob on a 1998 Ford ranger. Click 8 times fast then programs all key hobs at once any button. I tried it myself I couldn't click fast enough. My man did like charm. Thanks so much😊
If you have more than 1 FOB, I had 4, do all at the same time. When you get to the part where you press a button on the FOB, do all, one after another within the 20 Seconds.
Hello I can't seem to get my fobs working. It's weird because there were working fine just the other day. If you've able to offer another suggestions, I'd deeply appreciate it. Ty
Did not work on my 2010 f150 Tried your steps then tried starting truck on the 8th and nothing both times Tried new battery also Think I am ordering new remote 😮
What do you do if after 8 times the truck does not activate the door locks for programing? My fob does not work after 3 years and the battery shows 2.9v. Its a 2008 ranger.
Not sure if you're still having a problem, but I've seen comments on several videos of people saying theirs worked trying it 5 times. And a few said 9 times.
@@YouLookinAtMe-Bro My door locks now work for some reason after the 8 key on setting thing, but the fob dont work until I did it about 5-6 times, THEN it started to work with the fob. Thanks for the info, it now works.
Would you need to do this procedure after replacing the remotes battery on a 02 Ford f150, I replaced battery on remote and it will not open doors at all. Thanks.
Excuse me to bother you I have a 2003 f150 truck put a brand new battery but my alarm will not go off I connect my battery and my alarm keeps going off what should I do let me know please
Programs and worked except I have 2 key Fobs.. I programmed my wife's and mine doesn't work.. reprogrammed mine and my wife's doesn't work.. seems I can only have 1 fob working.. new batteries and haven't had this problem since the truck was new on 2002.... any advise
I have a 1999 ford ranger and I replaced the battery in the remote and even ordered two new remotes on ebay.This method does not work.I guess it will cost me a fortune but all I can do now is take it to a dealer or locksmith that can do it.And I have seen many other people that say this did not work for them either.
I've was able to set the Remote but stops working when I walk away then I have to use my key then it starts working again I lock it walk away an stops doing same thing it started doing with the Original what else could it be other then the Remote?
Have a 2004 explorer xlt and worked, also have a 2001 explorer sport but can’t make it work, already tried several combinations and nothing, if anybody made it work in a different way please help me!
I programmed the key but the issue I have is that when I hit the alarm bottom i can't turn it off only stops when I start the car any idea why is this happening
Something strange about the early 1998 Crown Vic's, only they seen to not have this procedure work or any other procedure. That is all 1998 before June manufacture that is. They are going to make me pay $100 for this, UNBELIEVABLE! If anyone has any advice I'd love to hear it. I do have the OBD II scan tool but there is nothing to do with key fobs on it.
Same thing happened to me. I ended up popping mine apart, unassembled it & cleaned it out with a cotton swab dipped in alcohol. Let it dry & reassembled it & tried to program it again & it worked!
Can you buy keys that are not programmed like he is like just say like one of the four keys are Toys and you buy one in the Amazon man says you can use them as a toy but I bet you can that would be insane
Take the key fob apart. Pull out the insides & clean it with a q tip dipped in alcohol. Let dry & reassemble. My new fob I bought on Amazon wouldn't program until I did this. Now it works!
My man just did it for 2key hob on a 1998 Ford ranger. Click 8 times fast then programs all key hobs at once any button. I tried it myself I couldn't click fast enough. My man did like charm. Thanks so much😊
Thank you very much for posting this video. I programed 2 remotes on my 2000 Expedition.
what is the frequency of the remote is it 433 or 315
If you have more than 1 FOB, I had 4, do all at the same time. When you get to the part where you press a button on the FOB, do all, one after another within the 20 Seconds.
Thank you so much brother you see me so much aggravation I lost my key fob the other day and you save A trip to the dealer God bless
After attempting a few times (as indicated), I was able to program a FOB I got from a junkyard. The tips were very helpful to understand the process.
Thank you for doing the video simple,I just did the programing in less than 3 minutes 🤙🙏
THIS DOESNT WORK FOR ME the instructions say i need my original fob and i dont have it can someone HELP
Thank you so much I just fixed my 2006 ford Transit
This worked on my 2003 Ford F150.
Thanks for the video👍 I was watching your video and do it at the same thing and it really works👌🛻
Hello
I can't seem to get my fobs working.
It's weird because there were working fine just the other day.
If you've able to offer another suggestions, I'd deeply appreciate it.
Ty
I tried this and the doors tried to lock but didn't go any further. Do you have any other ideas?
2000 Ford Ranger
Any idea how to program a 2022 Ford Jayco exact same remotes but can't seem to get it in program mode.
Thank You so much. It worked on my 2002 Escape ..
you just saved me 65 $ thank you!!
Hey I bought the same key fob 50 bucks and my truck is a 2000 f150 I’ve done everything but it won’t go into key programming mode at all help
Awesome tip Joe, I have a 2010 F150 and only 2 fobs, ha now I'm off to eBay. Thanks
Steve Rob Sweet. Hope your programming is successful and glad the vid helped.
Did not work on my 2010 f150
Tried your steps then tried starting truck on the 8th and nothing both times
Did not work on my 2010 f150
Tried your steps then tried starting truck on the 8th and nothing both times
Tried new battery also
Think I am ordering new remote 😮
If the key fob it’s not working and you don’t have the key of the car, there’s a possibility to open it, how can I do?
My truck cycles every time I turn the key. What can be the cause?
What do you do if after 8 times the truck does not activate the door locks for programing? My fob does not work after 3 years and the battery shows 2.9v. Its a 2008 ranger.
Not sure if you're still having a problem, but I've seen comments on several videos of people saying theirs worked trying it 5 times.
And a few said 9 times.
@@YouLookinAtMe-Bro My door locks now work for some reason after the 8 key on setting thing, but the fob dont work until I did it about 5-6 times, THEN it started to work with the fob. Thanks for the info, it now works.
My new fob works but the old one is now not working? Any ideas oh and mine works at the 5 turn
Would you need to do this procedure after replacing the remotes battery on a 02 Ford f150, I replaced battery on remote and it will not open doors at all. Thanks.
cheers it worked on my 2005 transit
Excuse me to bother you I have a 2003 f150 truck put a brand new battery but my alarm will not go off I connect my battery and my alarm keeps going off what should I do let me know please
Thanks for the video. Very helpful
Nice truck. Love them Rangers.
Thanks worked on my 2002 Ford Escape
Does it work on Fordf650?
Does this work if the original key is broken and the chip is lost?
I try do the 8 moves on the switch but the locks dont open or close u have any idea???
I have 1997 Ford F-150 Mark III Edition and it didn’t work any suggestions?
Programs and worked except I have 2 key Fobs.. I programmed my wife's and mine doesn't work.. reprogrammed mine and my wife's doesn't work.. seems I can only have 1 fob working.. new batteries and haven't had this problem since the truck was new on 2002.... any advise
you need to program them both at the same time: on/off 8 times (door locks will go on) then press LOCK on 1st fob then press LOCK on 2nd fob.
Thank you for the reply and YES it worked by programming them together. I have both Fobs working now without issue. Your a genius. Thank You
No worries dude glad to help
99 f150 and couldn’t get it it to cycle on the 8th turn. Took it to batteries plus and they couldn’t get it either.
I have a 1999 ford ranger and I replaced the battery in the remote and even ordered two new remotes on ebay.This method does not work.I guess it will cost me a fortune but all I can do now is take it to a dealer or locksmith that can do it.And I have seen many other people that say this did not work for them either.
1998 explorer sport stick shift. Did not work
Thanks is being a great help 🤔🤗😎
what is the frequency of the remote is it 433 or 315
Can anyone tell me if this works on a 2005 f-350 diesel I’ve watched 5 or 6 different videos but I can’t seem to get it to work for me
not worked in our F150 Lariat 2005.....after 8 times (on/off) NOTHING to changed(((
Thank you
I've was able to set the Remote but stops working when I walk away then I have to use my key then it starts working again I lock it walk away an stops doing same thing it started doing with the Original what else could it be other then the Remote?
Thank you such a help
I will be using a replacement key for a my ford will this still work?
Has to be electronic so they will work?
Thx!!!it work on my f150 2005!!!
Thank You for the info.
Have a 2004 explorer xlt and worked, also have a 2001 explorer sport but can’t make it work, already tried several combinations and nothing, if anybody made it work in a different way please help me!
I programmed the key but the issue I have is that when I hit the alarm bottom i can't turn it off only stops when I start the car any idea why is this happening
Did you try the unlock button 2 times real fast?
Or holding the panic button down for a few seconds?
Mine shuts off with the unlock button. 🤔
Are these fobs reusable?
Will this work on a 1994 f150 my remote has only 2 bottoms
it's good video !
Something strange about the early 1998 Crown Vic's, only they seen to not have this procedure work or any other procedure. That is all 1998 before June manufacture that is. They are going to make me pay $100 for this, UNBELIEVABLE! If anyone has any advice I'd love to hear it. I do have the OBD II scan tool but there is nothing to do with key fobs on it.
Do they work for 93 ford ranger
Damn didnt work for mine.
Thanks man
It didn't work on my 2016 transit. Turn it 8 times and nothing happens
Does it matter is never have one
Does the door need to be open or can it be closed
Same thing happened to me. I ended up popping mine apart, unassembled it & cleaned it out with a cotton swab dipped in alcohol. Let it dry & reassembled it & tried to program it again & it worked!
Did not work for me, watched another video, and on the 8th time he started the truck. Then the doors locked and was able to program my key fobs.
99 f150 and couldn’t get it it to cycle on the 8th turn. Took it to batteries plus and they couldn’t get it either.
Is this work in ford territory 04
Can you buy keys that are not programmed like he is like just say like one of the four keys are Toys and you buy one in the Amazon man says you can use them as a toy but I bet you can that would be insane
Does this work for a 2014 e250?
Did it work?
Yes
This did NOT work for my 99 F250 diesel pickup--Any further ideas????? Thanks
Yeah it didn't work for me either, did you figure it out?
Won’t work for my 99 F250
Or my 07 Taurus
Missing a step. Often you need to press the old remote then the new one.
didn’t work for 1998 ford f-250 :(
Yeah is that a Ranger I like if it is I like those
It didn't work on my 2008 f250 diesel
Doesn't work on my E350 Econoline.
my car is not work
??
Didn't work
Take the key fob apart. Pull out the insides & clean it with a q tip dipped in alcohol. Let dry & reassemble. My new fob I bought on Amazon wouldn't program until I did this. Now it works!
No travaja en 2001 para vajo
Would this work with no power locks starting out with?
Hey what if it doesn’t work. I can hear something clicking in the engine but the fob doesn’t engage