Fixed! P0496 Chevy Equinox GMC Terrain 2010-2017 Easy!
Вставка
- Опубліковано 23 лис 2022
- Fixed! P0496 Chevy Equinox GMC Terrain 2010-2017 Easy!
Equinox Playlist: • Chevy Equinox
In this video I will show you how to replace the EVAP Purge Solenoid on your 2nd generation Chevy Equinox. This is on the 3.0L V6.
Symptoms of a P0496 will include a check engine light, and most likely no other noticeable symptoms. Some may experience a hard start / crank condition (this was the case for me after filling up with gas).
This was a pretty easy job that, if you do it yourself, can save you some money. Below are some links to the part, tools and other useful items for doing this job.
AC Delco Vent Purge Solenoid:
amzn.to/3tVqWW5
Mechanics Tool Kit
amzn.to/3iwDpJz
Jack and Jack Stand Combo
amzn.to/3nAFec1
Disclaimer for DC Auto Enhancement
We are doing our best to prepare the content of this site. However, DC Auto Enhancement cannot warranty the expressions and suggestions of the contents, as well as its accuracy. In addition, to the extent permitted by the law, DC Auto Enhancement shall not be responsible for any losses and/or damages due to the usage of the information on our website.
By using our website, you hereby consent to our disclaimer and agree to its terms.
The links contained on our website may lead to external sites, which are provided for convenience only. Any information or statements that appeared in these sites are not sponsored, endorsed, or otherwise approved by DC Auto Enhancement. For these external sites, DC Auto Enhancement cannot be held liable for the availability of, or the content located on or through it. Our Privacy Policy was created by the Privacy Policy Generator. Plus, any losses or damages occurred from using these contents or the internet generally.
2010 Chevy Equinox GMC Terrain
2011 Chevy Equinox GMC Terrain
2012 Chevy Equinox GMC Terrain
2013 Chevy Equinox GMC Terrain
2014 Chevy Equinox GMC Terrain
2015 Chevy Equinox GMC Terrain
2016 Chevy Equinox GMC Terrain
2017 Chevy Equinox GMC Terrain - Авто та транспорт
You did a great job with a video it's the only one online that's actually helpful.
Thank you for letting me know. It is actually really difficult to record it well because of it's location. I was hoping people would watch and say "I can't see a dang thing" I appreciate you commenting.
Thank you sir! Spent an hour looking at pdf files, manuals, and could not find it, looked at your video, swapped out part in 20 minutes. Had an issue where the fans kicked in high as soon as I started the suv, I forgot to reset the engine light, after reset it's perfect!
Glad it worked out for you, thanks for watching and giving me your feedback!
My fans did the exact same thing. Seems fine after clearing the codes. Kind of freaked me out at first though lol
@@couchpotatoe3204 5 months running strong no issues! Hope the same for you.
@@wichito8736 That's encouraging. Just finished and have a couple "permanent" DTC codes set now which cannot be cleared with my scanner apparently, but she's purring like a kitten now and the permanent codes should clear after 3 drive cycles. Learned something new (permanent codes). Cheers.
@couchpotatoe3204 I'm having the same issue. So permanent codes cannot be cleared with the scanner tool?
Nice video. Just did this. I pulled the 4 bolts out to move the throttle body as it makes it easier to see. Make sure new rubber bushing flat side is the same as the old one you removed as it would not let the bolt get started for me .
Excellent video, difficult shots but uou got them anyway. Thanks pal.
Thank you, I'm glad it was helpful.
Thank you for the very helpful video. I also removed my throttle body without unplugging for easier access and gained a service stabilitrak warning. tried to clear but kept returning. Hoping throttle body is just resetting. Appreciate helpful comments.
Sometimes you have to do a throttle relearn. Thanks for watching and your feedback!
@@DCAutoEnhancement You were right! All ok now. Thanks so much!
Great video, put a Napa one in and does a ticking sound but the car runs great
Thank you for the video.This also applies to the 2016 Chevy Equinox AWD LTZ?
It should
Thaks sr
Thank you for watching the video. I know it wasn't easy to see what was going on.
I replaced the part and my light is still on after driving it for a few hours how do I turn the check engine light off?
I don't recall if I cleared my code with a scanner or if it shut itself off. EVAP systems usually require approximately 3 drive cycles to clear. That would be 3 15 min drives shutting the key off between drives. If the light persists, check wire connections and hose connections. If everything is good with the connections, inspect the hoses look for any damage that could cause an air leak. Let me know what happens
Nice shop. Are you going to do a video of the new garage?
Maybe once I get everything put away and organized!🤣😂
Does this usually fix the code? Is there any other way that this code comes up?
I am pretty confident that this is the fix for this code. Are you having the same symptoms?
I have to replace this now, bought the car from my brother a few months ago. How much effort did you give to pull the vapor line? I Have the clip pushed but the line doesn't want to budge. Also, is there a tab to push when removing the connector or it's just pull out? Because like you mentioned, it's hard to see since it's in a tight space, Would removing the bolt first to loosen it make it easier to remove the connectors?
I think as long as you can get to the plug and the hose, it's best to leave the bolt. If you twist the tube/hose, it may break it free. There should be a tab on the connector if I remember correctly.
@@DCAutoEnhancement thank you very much for that. Also, you have the best video regarding replacing this part by far. 💯 I already subscribed and will be using your channel for my 2011 equinox
@@scenicenglish7465 thanks, I appreciate it!
@@DCAutoEnhancement I appreciate your efforts making these videos. One last question, would you recommend using a silicone based lube on that rubber bushing when reinstalling?
@@scenicenglish7465 I don't recall using a lubricant. I would say if you are going to use a lubricant just make sure it's safe to use with rubber.
Thanks for the video, do you know what is the failure mode for this code P0496??
I guess I don't understand the question.
Not worry, I already figure it out......
The failure mode, (at least on my case), is when I fill the gas tank it take longer to start up and the first seconds the engine rattle besides that no other simpthon.
Thanks for your quick response.
@@victorgarmin2311 I had the same problem after getting gas. I didn't have the rattle though. Did this fix the rattle for you?
@@DCAutoEnhancement I just buogth the replacement part, I hope arrive tomorrow and I will chenge it on Sunday, I will reply once I finished.
@@victorgarmin2311 good luck and thank you for watching and commenting.
Hello. Do you know part number? Thanks
amzn.to/3tVqWW5
Does the code go away on its own
If I remember correctly, it will but EVAP codes have to go through a certain amount of drive cycles.
@@DCAutoEnhancement I replaced mine and rested the code but it still shows it on my scan tool
@@SeeYouInHellDad it may store the code until the drive cycles are complete. It's you check engine light on?
@@DCAutoEnhancement no because I rested it. But the code is still present in my scan tool
@@SeeYouInHellDad does your scan tool show if it is an active code or a history code?