Good information. Nice job.... from Malaysia.... I just want to ask. My mercedes w211 E200 KOMPRESSOR engine. What the code number for zentrales gateway unit. Thanks
Hello Vehix411, I have a question, for example the board is broken, possible to re-soldering chips and eeprom from broken board to second handed one, will going to work without programming?
hello prefct video same i can ask you same thing i put in my car hedraulic trunk and it is dont was before on my car so in settings in car i don’t see option limer trunk on or off it’s because in my getaway don’t have this option?
I have a 62 plate (2013) E250, I can’t find this module anywhere, or am I just being stupid, I’m from the UK also so have a RHD does that matter as to where the location is?
Can you just change the VIN manually? I’ve flooded my rear lift gate ECU on my GL350 installed used one it says wrong VIN. I’ve desoldered original processor and soldered in newly acquired ECU, put it in, and it says that original ECU needs programming. If I put the processor with wrong VIN back, can I just change the VIN and keep all programming from other car. It also has Freescale processor which I understand is a Motorola
Is this Possible for a 2008 Mercedes Benz e350 base model rwd. It has three current codes 9028 fault in CAN communication with control module. 930E synchronization of the dtc memory cannot be ensured. 9068 panoramic door roof is not normalized.
How about a CGW from a w204 c250? It’s incorporated into the front SAM unit. I think I fried mine with an electrical discharge when connecting my car to xentry scanner with engine still on.
can this 2011 gateway module be programmed like you did the one you showed in the video send me a link where I can show you the gateway module I'm talking about
I have a 2012 s550. Had water in the fuel control module and needs to be replaced. Can you help me clone this part. Have the original and a used I bought from eBay. Thank you
I see you are running a Carprog version 12.33. I ordered the Carprog and in the instructions they said not to update or the MCU in Interface will be damaged. I am currently using Carprog Version 10.93 but can't program the Zentrales Gateway Module. When I try it has 5 attempts but does not download anything. Any help would be appreciated.
If it was physically bad and you installed the donor without Programming it should communicate. Now the milage will be wrong in it and the vin number also all your service records that the car used to have will be different so you will have interference between your cluster milage and this device data
@@vehix411 Thanks for Reply, I have installed it, all Data seem proper, however 91B5 code is appearing when scanning the car with a scanner. Several Alarms are shown on the dash board, such as LR/DSR and few others. Whats shall be solution for this problem ?
I heard Karman auto is scamming people. Taking money and not returning parts etc. I called and emailed multiple times with no response. Ill take a chance and try programming myself.
Great information bro,how can I reach you?any contacts?
Karmanauto.com
Good information. Nice job.... from Malaysia.... I just want to ask. My mercedes w211 E200 KOMPRESSOR engine. What the code number for zentrales gateway unit. Thanks
Is there a reason why it says no response from unit when you checked the vin after program?
how did you take out the board from enclosure? the pins look pretty well fixed in the plastic and there is no quick disconnect.
Hello Vehix411, I have a question, for example the board is broken, possible to re-soldering chips and eeprom from broken board to second handed one, will going to work without programming?
Hi i have a question where is the Zentrales Gateway in a w203 c230 2005 located
hello prefct video same i can ask you same thing i put in my car hedraulic trunk and it is dont was before on my car so in settings in car i don’t see option limer trunk on or off it’s because in my getaway don’t have this option?
I have a 62 plate (2013) E250, I can’t find this module anywhere, or am I just being stupid, I’m from the UK also so have a RHD does that matter as to where the location is?
Can you just change the VIN manually? I’ve flooded my rear lift gate ECU on my GL350 installed used one it says wrong VIN. I’ve desoldered original processor and soldered in newly acquired ECU, put it in, and it says that original ECU needs programming. If I put the processor with wrong VIN back, can I just change the VIN and keep all programming from other car. It also has Freescale processor which I understand is a Motorola
Is this Possible for a 2008 Mercedes Benz e350 base model rwd. It has three current codes 9028 fault in CAN communication with control module. 930E synchronization of the dtc memory cannot be ensured. 9068 panoramic door roof is not normalized.
Can the Carprog and software program a 2011 S550 gateway module
Where did you buy carprog?
hey Dan this Huseyin, what year and model Mercedes use this module and does car prog have all this pinouts?
Thanks 🙏 good video and explanation
2006 C350 3.5 does mine have seperate gateway?
How about a CGW from a w204 c250? It’s incorporated into the front SAM unit. I think I fried mine with an electrical discharge when connecting my car to xentry scanner with engine still on.
can this 2011 gateway module be programmed like you did the one you showed in the video send me a link where I can show you the gateway module I'm talking about
I have a 2012 s550. Had water in the fuel control module and needs to be replaced. Can you help me clone this part. Have the original and a used I bought from eBay. Thank you
Hi Vehix411! Thank you for share this video! Nice work! Can you describe the signals for the cable colors?
this is called JTAG: a way of accessing serial memory data
I see you are running a Carprog version 12.33. I ordered the Carprog and in the instructions they said not to update or the MCU in Interface will be damaged. I am currently using Carprog Version 10.93 but can't program the Zentrales Gateway Module. When I try it has 5 attempts but does not download anything. Any help would be appreciated.
You need to get original that’s why it’s not working
@@vehix411 where do we get the original?
Hi sir what tool and software do I need?
Will the car work without copying service data information from previous Gateway ?
If it was physically bad and you installed the donor without Programming it should communicate. Now the milage will be wrong in it and the vin number also all your service records that the car used to have will be different so you will have interference between your cluster milage and this device data
@@vehix411 Thanks for Reply, I have installed it, all Data seem proper, however 91B5 code is appearing when scanning the car with a scanner. Several Alarms are shown on the dash board, such as LR/DSR and few others. Whats shall be solution for this problem ?
Awesome video!
Hello friend i have ml 350 diesel may abs ,ecm ,srs ,front headlight ,ism ,and my car is not start can you help ?
Hi there ... Where is this located on a 2015 GLK 250 ? pls ...
Amazing that he actually pronounces solder crr
Superb sir,steve uk
Good information
where can i pick this up ?
Awesome, thanx a lot, 👍👍👍
Nice Thanks Good Video
Hi nice work, can you please tell me where is located in a mercedes ml 350 2006. Thanks!!
we're is it located in w204 blue effincy
Hi my name is Robert somebody help me my car is mercedes e200 w212 2010 where is central gateway module location please 🙏?
At last, someone that can pronounce solder correctly, not bloody sodder!
I have a problem with my C200 2016 benz
where is it on the 2011 c300
Where is this module located in 2008 mercedes?
Should be under the drivers seat. You'll have to remove the seat from the car to get to it. Its in a compartment in the floor.
Awesome video. Can I send mine to you?
Karmanauto.com
How do I communicate with you I need mines reprogram
Where is this module located? I've torn half of this 2015 E350 apart trying to find it
Your 2015 does not use that module. It has the central gateway function integrated into the front SAM.
@@rennmotorsllc9787 the "front SAM" is famous for drinking from the nearby windshield drain when it floods up
Car prog original or clone ?
Wondering same thing!
I need your service
Karmanauto.com
Orig or clone carprog?
Original
@@vehix411 where did you buy it?
Awesome!!
I heard Karman auto is scamming people. Taking money and not returning parts etc. I called and emailed multiple times with no response. Ill take a chance and try programming myself.
I tied calling and texting never got a response wanted to make sure there legit what u do to get it reprogramed
Hi. Great video. Do you have a video for the 2003 e500 Zentrales gateway VDO 410 213 005 012. Or the... A 211 540 31 012