Can Am X3 Trail Ride Aftermath/Tablet Holder Install
Вставка
- Опубліковано 5 гру 2020
- Can Am Maverick X3 Trail Ride aftermath. How to install a tablet holder on a Can Am X3 RC Turbo. Watch before you buy! How to install a tablet holder on a Can-Am X3 64 inch RC, Base, XMR! Please like and subscribe and follow along on this next project build the BLUE REAPER! This is a educational video for a 2019 Can Am Maverick X3 RC Turbo 64 inch unit.
UTV DIRT Swag!!! It's finally here!!! Show your support and visit our Merch store to get your custom UTV DIRT swag today!!:
click.teespring.com/wf/click?u...
Follow us on Instagram:
/ utv_dirt
pd
amzn.to/2VGSjSP - Авто та транспорт
Good looking ride!! I just purchased a 2022, and I went with a 14 inch system 3 wheel with a 4+3 off set, running a system 3 , 370 32" tire..NO RUBBING!! just wanted to say, I think I saw you are running 15 inch wheels with 5+2 off set.. May be you might want to go to a 4+3 off set and see what that does!!
Thanks! Yeah I should of went 14s it probably would of been perfect. I sold this one and will probably be getting a new one when the 2023s come out. Thanks for watching!
@@UTVDIRT yes sir!! I appreciate you as well..Thank you for taking the time and making video for guys like me!! Lol..We all learn from each other!!
I'm the one that commented on flipping the latches on the box, I'm glad it worked out!
Yes it worked out great! Thanks for sharing the info.
I was about to pull the trigger on 32" Carnivores myself. I read on the forums the same thing that they wouldn't rub. Other ppl were saying they would rub and that you'd have to buy offset rims or wheel spacers. Thanks for the update. I'll probably go with the 30s.
Yeah that's why I wanted to get this video out so it could help other people. Thanks for watching!
Heat gun and push in the plastic.
Yeah someone had mentioned that I could use a heat gun. I might try wheel spacers first and see what happens. Thanks for watching!
The shop where I bought my x3 max installed 32’s on my car two inch spacers and adjusted the shocks no rubbing so far plenty of room!!
Happy new year
Happy New year!
Any updates ?
Looking for an up date too. I was thinking on going with the same set up. But could do without the rubbing. What was your fix.
My question is when you install that tablet holder what are you covering the fluid reservoirs back up with
I took the factory cover panel off to install the holder. It snaps back in behind the holder.
I'm sure you'll figure it out , you always do mr mike . Great update fellas
Yeah we will definitely figure it out. Lol
Thanks for watching!
1.5" spacer may solve your issue with rubbing.
Thanks I will have to check into some spacers.
What map software dis you go with
I would go with Lifetime Trail maps.
Super atv makes a 3 inch shock spacer
That might lift it up enough to solve that problem I got it on mine it worked
Thanks! I will check into that shock spacer.
What wheel offset are you running? I have a 4+3 wheel and I have the same rub at full lock on compression. A 5+2 wheel should eliminate that. The farther out the tire is offset the more swing a tire has instead of a pivot like factory 0 or 1 offset
They are 15 inch tires with a 5+2 offset and still rub.
Well that’s good to know, I get a little rub. I just don’t worry about it. Lol
@@brandonfenstermaker2375 Yeah I might just try the wheel spacers and see how that goes.
Are those 15s or 14inch rims and tires? I went with 14s and 32 carnivores and no rubbing!
They are 15 inch tires with a 5+2 offset.
what about 2inch wheel spacers to set the tires out, might give you the clearance you need. did you set your cluch up for your tires ?
Yes I did a KWI clutch kit for the 32s. I will probably try the wheel spacers first and see if that helps.
That rubbing is so minimal id let her ride and not worry about it. You could replace that inner fender panel a lot cheaper than doing suspension mods.
Yeah that is the other option. I might just try spacers and see what happens.
I'm new to the channel. Nice job! I ran into the same tire rub issue on my 64" 19 XMR. I ended up using a spring lift from High Lifter. Took care of the problem, looks awesome, and gave me more ground clearance. By the way, what windshield are you using?
Nice! I will have to check out those springs. The windshield is probably the best mod I have purchased so far. I picked it up from Bent Metal off road. I did a install video on it. Check it out. Thanks for watching!
I have 32" k9's and 5+2 offset rims.
Mine Rubs likes that. But 600miles later still same rub marks. Never got any worse. Looks just like yours.
That's good to hear. Thanks for the info!
How much do this cost
The tablet holder was only 50 bucks. I have a link in the description of the video. Thanks for watching!
I fill your pain...all toys are a money pit
Yeah I know especially this one! Lol