It appears to have about the same fill rate as my Yong Heng single. One difference I did notice is the temperature… mine is cooled with ice water and doesn’t go above 115 F even while filling 3 tanks in a row with a fan blowing across the head/cylinder/pipes. I start with a 6.8 Ltr then fill a 3 Ltr and last a 100 cui. All carbon fiber. I stop at 300 BAR or 4350 PSI. I trying to see what the advantage is with 2 pistons but haven’t yet. Am I missing something right in front of me? I refill all my tanks when they go below 250 Bar if that helps?
Yes, I was also filling air tanks with a single piston New Warrior compressor, just like the Yong Heng. The only difference is that it doesn't put so much pressure on as a single, and they are rated for scuber and air tank filling. I think the first cylinder works like on the yong heng and warrior, the second cylinder works better at high pressure and probably takes some of the strain off the first. You can't go wrong with either for value and getting the job done. My New Warrior has done a great job for three and a half years. I was ready for an upgrade, so this is what I came up with.
informative video, thank you, wich model are you running there ?
Incredibly fast. The water cooling makes a big difference.
Seems to be a good bit of kit mark 👍🏻
tell you that’s not bad at all pal great upgrade 👍
Hello. do you use this air to breathe?. In my case, the air smells and tastes of oil. is this also the case with you?
Pcp compressors are not made for breathing air, only for pcp air guns.
I have the same one. I added a computer radiator inline with the cooling make a huge difference. I fill my 65 cf tank with it
I never understood why they don't make these things easy to mount!
It appears to have about the same fill rate as my Yong Heng single. One difference I did notice is the temperature… mine is cooled with ice water and doesn’t go above 115 F even while filling 3 tanks in a row with a fan blowing across the head/cylinder/pipes. I start with a 6.8 Ltr then fill a 3 Ltr and last a 100 cui. All carbon fiber. I stop at 300 BAR or 4350 PSI. I trying to see what the advantage is with 2 pistons but haven’t yet. Am I missing something right in front of me? I refill all my tanks when they go below 250 Bar if that helps?
Yes, I was also filling air tanks with a single piston New Warrior compressor, just like the Yong Heng. The only difference is that it doesn't put so much pressure on as a single, and they are rated for scuber and air tank filling. I think the first cylinder works like on the yong heng and warrior, the second cylinder works better at high pressure and probably takes some of the strain off the first. You can't go wrong with either for value and getting the job done. My New Warrior has done a great job for three and a half years. I was ready for an upgrade, so this is what I came up with.