HavaCrack: 43% Reduction Gear Install - Nissan Patrol - PART 1 of 3

Поділитися
Вставка
  • Опубліковано 5 вер 2024
  • Part 1 of 3 videos showing most steps of how open up a a Nissan Patrol/ Safari TX12a transfer case and install the 'Marks 4WD Adaptors' 43% Reduction Gear.
    Part 1: Dismantling the case up to taking off the rear cover. (Marks 4WD instructions 1-5)
    Part 2: (coming soon): Separating the rear/ middle/ front case sections. Parts in Kit. Bearing identification. Grinding clearance for Low Range gear. (Marks 4WD instructions 6-11)
    Part 3: (coming soon)
    Note: I may get something wrong, I am not a mechanic so no thumbs down... #havacrack #patrol4WD #patroltraction

КОМЕНТАРІ • 10

  • @davidstrazzari5279
    @davidstrazzari5279 7 місяців тому

    Thanks to you I was able to self install my own reduction gears (relatively problem free), and without this three part series I would have spent a lot more money on workshop labour instead of just tools. Again I cannot thank you enough for providing a visual guide of the 'how to'.

    • @HavaCrack
      @HavaCrack  7 місяців тому

      Thanks for the reply, I am glad it helped someone else, you just have to suffer my monotone! I did loose one small bit of video of the process in p3, but by the time anyone got to that they were on the home stretch. Not sure if you have had a chance to see how the gears work on a track but for my manual it was great. Regards, Mick

  • @sedwards4716
    @sedwards4716 3 роки тому

    Thanks for making this series. Helped quite a lot

    • @HavaCrack
      @HavaCrack  3 роки тому +1

      Glad to help others that is why I make them. I am never going to be a UA-cam sensation from them. Regards Mick

  • @hedgemcnorry9459
    @hedgemcnorry9459 4 роки тому

    good idea bagging the bits

    • @HavaCrack
      @HavaCrack  4 роки тому

      hedge mcnorry Especially if you are getting old and have too many other things to remember, or forget! mick

  • @typo368
    @typo368 2 роки тому

    how heavy is the transfer case? roughly TIA :)

    • @HavaCrack
      @HavaCrack  2 роки тому +1

      Maybe 30kgs-35kgs.. Once out of the vehicle it can easuly be lifted by one person. To get it out you just need a trolley jack, I drove my 4wd onto ramps under the front wheels which gave enough height. To remove/install you need 2 people, one to lift/lower etc and one to manouvre but it is easier than removing the whole transmission. Mick

  • @joselopezcanolopezcano9398
    @joselopezcanolopezcano9398 4 роки тому

    Es una pena que no sea en español

    • @HavaCrack
      @HavaCrack  4 роки тому

      José lopez cano Lopez cano Me cuesta hablar inglés, lo siento, solo tienes que ver las fotos. saludos michael y traductor de google