Lol, I've been watching them before now, she's actually pretty creative, so when I seen that thumb I was even more LIKE....yeah, that thumb was tha Truth! lol
Love the spacious windows in the work area! Awh! Must be getting cool on the Orrgon Coast. I am guessing 58F at night and 65F during the day for mid-October!
Hello, thank you for your video. Can you tell me if the smoke goes out of the machine using the conveyer or goes on the filter or outside if you use an air extractor?
My favorite part of this whole video is her clickbait thumbnail where in order to sell this laser engraver she welcomes us to that over the shoulder thick ass shot for literally no reason. It speaks to the merit of the engraver. 😂 laser engrave the ass-less chaps used for the next thumbnail and I may just buy it. Keep hustlin lose the “dude-bro-what-up-yt-it’s-ya-boi-“hand gestures tho.
Long subscriber here. Love your you guys, but I've been skipping watching this for a couple of days because of the bootie click bait. Trust me when I say that only young kids fall for that, and they don't care about the building of your beautiful home as most of do.
To have just to one time printing those letters as a tuxedo there is nothing like it in your windows next to the messages bell saying you have any choice.
Really seeing some great possibilities with that feeder deck addition ! Now you can make furniture, and maybe start with a real desk & storage for that laser engraving station... instead of the sawhorses you're using now ? By the way, was that halo effect coming from smoke off the laser station, or a misty morning ?
So many possibilities! We already have so many ideas for the house. You're right we really need a proper working area lol. One day.... :) (The halo is from the ring light we use for lighting)
How does getting free stuff from corporations so you can then make an advert for your social media followers tie up with your ambition to be self-sufficient?
This is so amazing, thank you cannot wait to test the Conveyor Feeder, one question how do we set the Xtool software ZOOM setting to the roller on the mouse?
This is because I did not do any "tabs" in the cut out settings (like how I did for cutting out the wood). That can be easily fixed by adding a few tabs.
Big fan of watching you build this project, but a little frustrated with the 2 week gap, then a product sales pitch. You have said before your videos are 6 months behind real time, so I can't imagine there should be a footage issue. I get the product sales pitch and it's necessity, but I would personally rather see them in between your regular Saturday uploads of the project we are all here for.
I'm doing to best I can. I'm only one person. Building, filming, and editing take A LOT of time. I used to be in advance for the content, but now we are pretty much caught up to current time. We are always actively working on the build, but things take time and sometimes it takes more than a week to complete the step we're working on. Also, at this time, our sponsors are how we keep our content free and support our channel. I work really hard to create sponsored content that is entertaining, but if you are not interested in the video, just don't watch it.
So when ever I see hot women with click bait like yours I usually gloss right past. You win, I clicked…but I’ll never subscribe. Just show off your skill not your body.
I’m sorry but your recent click bait intro’s and endless sales pitching are a step too far - what happened to the home building, have you all but stopped that? - hope the UA-cam algorithm is happy as I’m not and will be moving on. Bust wishes for the future
I'm doing to best I can. I'm only one person. Building, filming, and editing take A LOT of time.We are always actively working on the build, but things take time and sometimes it takes more than a week to complete the step we're working on. Also, at this time, our sponsors are how we keep our content FREE for you to watch, and support our channel. I work really hard to create sponsored content that is entertaining, but if you are not interested in the video, just don't watch it.
Our sponsors are how we keep our content free and support our channel. I work really hard to create sponsored content that is entertaining, but if you are not interested in the video, just don't watch it.
Hey I’m not gonna lie the thumbnail got me 😂😂
😂😂😂😂😂😂😂.It worked.
Lol, I've been watching them before now, she's actually pretty creative, so when I seen that thumb I was even more LIKE....yeah, that thumb was tha Truth! lol
No kidding...
As an owner and user of the S-1 variant, I can say these lasers are fantastic. Good overview of the conveyor system.
Thank you! They totally are!! Hoping to try out the new fiber laser one of these days. :)
That Xtool is crazy brilliant. I have 5 laser engravers, but that’s something else 😊
Good morning 🌅, very interesting, way over my head, And it looks like you need a flat assembly table, Great work stay safe from France,
Merci beaucoup!! Yes we definitely need to upgrade our working area
Love the spacious windows in the work area! Awh! Must be getting cool on the Orrgon Coast. I am guessing 58F at night and 65F during the day for mid-October!
The views are amazing! It's definitely getting chilly! We have a few days here and there in the mid 60s but there's not many left I'm guessing. :)
Damn it thumbnail got me and then the video was actually good!
Wow guys you two are amazing. Great team work makes the dream work. That laser machine is something else. Lovely design. What a view I'm jealous.
Thank you so much!! :)
love your video. P2 is a amazing machine! I bought it from your video last year.
Thank you!! It really is amazing. We love using it! :)
Looks awesome!!! Good job!! ❤
Thank you so much!!
That came nice. Love the work.
Your Thumbnails was hilarious 😂
bonitas nagals on thumbnail👍
Hello, thank you for your video. Can you tell me if the smoke goes out of the machine using the conveyer or goes on the filter or outside if you use an air extractor?
My guess is DREAM IT, BUILD IT
I see we meet again, gentlemen of culture.
THE DREAM HOME I BUILT
Very close! :)
QUESTION--How long did it take to learn the operating program?
It was SO easy to learn. By far the most intuitive and easy laser program I've ever used. I'd say less than 30 minutes to get going on the program. :)
My favorite part of this whole video is her clickbait thumbnail where in order to sell this laser engraver she welcomes us to that over the shoulder thick ass shot for literally no reason. It speaks to the merit of the engraver. 😂 laser engrave the ass-less chaps used for the next thumbnail and I may just buy it. Keep hustlin lose the “dude-bro-what-up-yt-it’s-ya-boi-“hand gestures tho.
Great video! 👍
Thx so much!! :)
Long subscriber here. Love your you guys, but I've been skipping watching this for a couple of days because of the bootie click bait. Trust me when I say that only young kids fall for that, and they don't care about the building of your beautiful home as most of do.
bel lavoro ma sono stato distratto dalla tua bellezza, non mi piace fare questo tipo di commento ma prendilo come un complimento buono
To have just to one time printing those letters as a tuxedo there is nothing like it in your windows next to the messages bell saying you have any choice.
Nice asa
I clicked on that thumbnail with my whole hand.
Really seeing some great possibilities with that feeder deck addition ! Now you can make furniture, and maybe start with a real desk & storage for that laser engraving station... instead of the sawhorses you're using now ? By the way, was that halo effect coming from smoke off the laser station, or a misty morning ?
So many possibilities! We already have so many ideas for the house. You're right we really need a proper working area lol. One day.... :) (The halo is from the ring light we use for lighting)
Dream it build it
Yep !! :)
DREAM IT BUILD IT
Yep!! :)
Clever advertising on the thumbnail.... definitely click bait. We outgrew the Xtool lasers but they are good for home use.
What are you using, now?
suscribed
Thank you!!
Sorry unrelated question. What make is your green jacket please ? The style is Just what I'm looking for .
It's a great jacket!! We both have one. It's N. E. Limited. Here's a link: www.bimart.com/ne-limited-mens-flex-canvas-jacket/p/9944782
How does getting free stuff from corporations so you can then make an advert for your social media followers tie up with your ambition to be self-sufficient?
You guys think a thumbnail like that will work for me?
Can do without those provocative type of pictures.
This is so amazing, thank you cannot wait to test the Conveyor Feeder, one question how do we set the Xtool software ZOOM setting to the roller on the mouse?
👍👍👍
Thank you!!
Have you stopped construction???
No we are always working on construction. Sometimes things just take longer than expected.
Yes, click bait.
Think rounded corners would of looked better
Thx for your input! :)
I don't like how some letter dro and stick up. I think it is a design flaw in the bed.
This is because I did not do any "tabs" in the cut out settings (like how I did for cutting out the wood). That can be easily fixed by adding a few tabs.
Auf Deutsch ungefähr "Vom Traum zum Haus ".....
Big fan of watching you build this project, but a little frustrated with the 2 week gap, then a product sales pitch. You have said before your videos are 6 months behind real time, so I can't imagine there should be a footage issue. I get the product sales pitch and it's necessity, but I would personally rather see them in between your regular Saturday uploads of the project we are all here for.
I'm doing to best I can. I'm only one person. Building, filming, and editing take A LOT of time. I used to be in advance for the content, but now we are pretty much caught up to current time. We are always actively working on the build, but things take time and sometimes it takes more than a week to complete the step we're working on. Also, at this time, our sponsors are how we keep our content free and support our channel. I work really hard to create sponsored content that is entertaining, but if you are not interested in the video, just don't watch it.
Are you guys cold because you shouldn’t have a jacket on
It's getting chilly these days! While we were filming it was low 50s.
@@PacificPinesRanch okay but I was wondering
So when ever I see hot women with click bait like yours I usually gloss right past. You win, I clicked…but I’ll never subscribe. Just show off your skill not your body.
Too small you'll regret not going bigger
I’m sorry but your recent click bait intro’s and endless sales pitching are a step too far - what happened to the home building, have you all but stopped that? - hope the UA-cam algorithm is happy as I’m not and will be moving on. Bust wishes for the future
She missed the thumbnail should be called a bumnail remark, or thought it was funny. I’m not a fan either.
I'm doing to best I can. I'm only one person. Building, filming, and editing take A LOT of time.We are always actively working on the build, but things take time and sometimes it takes more than a week to complete the step we're working on. Also, at this time, our sponsors are how we keep our content FREE for you to watch, and support our channel. I work really hard to create sponsored content that is entertaining, but if you are not interested in the video, just don't watch it.
I have to agree! I'm a live and let live guy, but....
That nice back drop click baited me
W0men try NOT to resort to prostitution and sex trade in any way, shape or form challenge (IMPOSSIBLE edition)
Nice Butt!
Thumbnails are classless. Let your work do the talking.
Aucun intérêt !!
Our sponsors are how we keep our content free and support our channel. I work really hard to create sponsored content that is entertaining, but if you are not interested in the video, just don't watch it.
DREAM IT BUILD IT
Dream it build it
👍👍👍
Thank you!! :)