VULCAN 900 fuel problems

Поділитися
Вставка
  • Опубліковано 14 жов 2024
  • Was having problems with the bike. It was not wanting to run at high speeds

КОМЕНТАРІ • 33

  • @pd8559
    @pd8559 Рік тому +2

    Might have been interesting to have put the new pressure regulator on your air pump to measure how it’s performance compared to the older pressure regulator. Would have given another data point.

    • @lp.670
      @lp.670  Рік тому +3

      Thank you for your comment sir very true sir sorry I didn't do that I was getting frustrated with everything the 1600 was a lot easier to check the pressure and I didn't think about it at the time thank you for your comment sir 👍

  • @JulianGjore
    @JulianGjore Рік тому +1

    Good evening sir. How come you don’t have the 2nd (white wire) and the part that goes with it on the back?
    I am having problem with my fuel pump where at this time it doesn’t work with normal wire connection. If I connect power directly into the negative (black wire) located on top of the pump assembly, pump works great.
    Not sure what’s going on since I do have power coming in at the connection plug but not where the two wires are connected inside the pump where two points are.
    Appreciate your help.

    • @lp.670
      @lp.670  Рік тому

      Sounds like to me you have a break in your wiring check out all of the plugs on the wires thank you for your comment sir 👍

  • @lindacampbell9187
    @lindacampbell9187 Рік тому +1

    Good video L P.! That's an interesting question you brought up about "once the bike gets hot is that fuel pressure even lower?" ~humm🤔 I don't know really. My uneducated guess would be that liquids get thinner when they get hot. So, that would mean less pressure? But I don't know about gasoline

    • @lp.670
      @lp.670  Рік тому +1

      Thank you for your comment when the fuel pump gets ware on it the pressure will drop plus the heat will make it drop more not much through thank you for your comment 👍

    • @anthonypollard-jr3dn
      @anthonypollard-jr3dn Рік тому +1

      Hey LP, finally got my Baron pulley kit, I think that plus the mod you did in with the restricter plate will be amazing. Seeing this I should probably check my fuel pressure too!

    • @lp.670
      @lp.670  Рік тому +1

      @@anthonypollard-jr3dn thank you for your comment sir now is your fuel pump after market if so yes but be careful make sure your clap's are Tite and no gas leaks just be careful sir 👍 thank you sir 🙏 and too how does your bike do at wide open if no problems then your fuel pump is probably ok

    • @anthonypollard-jr3dn
      @anthonypollard-jr3dn Рік тому +1

      @lp.670 it does really well so far, just with the rpm drop coming and having heard the stock fuel pumps can be problematic before seeing your vid, wondering if isn't a good idea keep an extra lying around! Tha KS again for an awesome video

    • @lp.670
      @lp.670  Рік тому +1

      @@anthonypollard-jr3dn yes sir it would be a good idea to have spare one around just in case you need it and stay ahead of the ball game another words great idea 💡👍

  • @2wheelsOrDieNC
    @2wheelsOrDieNC 6 місяців тому +1

    I was riding n she started dying. Got to point wouldn't run at all. I put that quantum rebuild kit in thinking fuel pump was going out. Put everything back together 😢 nothing. I sprayed some fuel in intake n she turned right over so its definitely a fuel delivery issue. Have you ever traced down fuel line to injectors? If so do you have a video?

    • @lp.670
      @lp.670  6 місяців тому

      Sir do you hear a noise in your tank if so your second filter is clough watch my other video.....filter clough Vulcan 900 .... I think this will help you out with your problem listen to the sound the bike is making at the beginning of the video I hope this helps you out let me know sir 👍

    • @2wheelsOrDieNC
      @2wheelsOrDieNC 6 місяців тому +1

      @@lp.670 will do. Thanks for your help.

    • @lp.670
      @lp.670  6 місяців тому

      @@2wheelsOrDieNC you are very welcome sir and I hope you can get your bike running again with out eney problem's and thank you for your comment sir 👍🌟

  • @BigErnGearz
    @BigErnGearz Рік тому +1

    I just changed the fuel pump on mine. Maybe lasted a week or two and never even got to put any real milage on it. Now guess what I have to change out again. That trash Quantum pump. Not sure where to find a quality pump from.mine is doing the exact same thing you said at the end.

    • @lp.670
      @lp.670  Рік тому

      Thank you for your comment sir it might be your second filter that's causing your problem just like it was mine when try to clean it up in my other video I could not get all of the stuff out of it but the bike is running great and today I found out that you cannot get a second filter for the pump with out buying a new complete fuel pump assembly.... but I have a video of me cleaning the second filter and it came last Friday and you need to see the crap that came out of the gas tank and that was my problem the hole time bad gas will water.... thank you sir for your comment 👍

  • @nathanharvey2741
    @nathanharvey2741 Рік тому +1

    Have you ever had any problems with the Quantum Fuel Systems fuel pump while riding , I can hear it whinning like its still priming on a slow roll like coming up to a stop sign never had any problems i don't reckon other than the sound

    • @lp.670
      @lp.670  Рік тому

      Yes I have it would not get over 60 mph but in a later video I have fixed the problem and now the bike is running great again and it was not the fuel pump and I have put over 300+ miles on her I can't remember the video I think It's the 4 video after this one you will be surprised to see what it was and no more noise now thank you for your comment sir 👍

    • @user-fu8gq5xg5u1
      @user-fu8gq5xg5u1 Рік тому

      I have it - rattle. It works quietly, but sometimes it creaks like a rusty door

  • @user-fu8gq5xg5u1
    @user-fu8gq5xg5u1 Рік тому +1

    It's me again. Sir, you didn't notice an interesting thing about quantum pumps.
    If you take the original pump and blow into it, then the air does not pass through.
    If you take and blow into the quantum, then the pump is blown. It's like there's no pressure shut-off valve. This is an observation.

  • @2wheelsOrDieNC
    @2wheelsOrDieNC 6 місяців тому +1

    What exactly are you doing banging on regulator?

    • @lp.670
      @lp.670  6 місяців тому

      Trying to increase fuel pressure

  • @ramondelosreyes3056
    @ramondelosreyes3056 7 місяців тому +1

    Best to clean out tank and an online filter, the transparent kind

  • @trail457
    @trail457 Рік тому +2

    So,what was the final pressure?

    • @lp.670
      @lp.670  Рік тому

      Thank you for your comment sir with the new fuel pump I didn't check it but I will soon and will be making a short video of it thank you for your comment sir 👍

  • @xxxxxx-db2bi
    @xxxxxx-db2bi Рік тому

    Buongiorno posso chiedere il difetto della moto se la pompa non ha pressione? La mia quando accelero non oltrepassa i 30 km h

  • @RavenWShaw
    @RavenWShaw Рік тому

    Was cuz the removal of the restriction plates

    • @lp.670
      @lp.670  Рік тому

      No Sir the problem was water in the fuel tank and I have a video of it I think the video is call clogged fuel filter Vulcan 900 and since that video I have no more problems with her you can see the video thank you for your comment sir 👍

  • @ryansmith9797
    @ryansmith9797 Рік тому +1

    My fuel gauge stoped working

    • @lp.670
      @lp.670  Рік тому

      Check the wires it might be the problem I hope you can fix it 🙏 thank you for your comment sir

  • @wandanial3367
    @wandanial3367 Рік тому +1

    VDS problem it's cut ,fuel pump

    • @lp.670
      @lp.670  Рік тому

      Thank you for your comment sir The problem was the second filter in the fuel pump and bad gas station now I got it going great again very happy now thank you sir 👍👍👍👍👍

    • @2wheelsOrDieNC
      @2wheelsOrDieNC 6 місяців тому

      2nd fuel filter in pump? Im aware of the tea bag lookin filter inside plastic housing. But where is 2nd?