Hello, will this computer program work with the current line of flysky radios such as the fs-i6x? Is it possible to program a fs-i6x to control wheels as you did ?
Hello. I don't know if this program will work with anything newer radios... I'm quite sure it is possible to control a MOA car the same way as I did on a newer radio. I moved from this radio to a turnigy 9XR many years ago and now I will try the Radiomaster Zorro. Programing will be done the same way.
xxgg I don't have any guide... I just took one self center part off and made a copy, out of plastic that I had laying around, with the dremel and knife. Then you need to find a spring and put it in place. just go for it, it's very simple to make.
im using 2 servo as wheel for my robot,how to make it forward reverse and left right using 2 channel only? i hv problem with the mix and reverse, please help me
Hi, You have to make Ch2 as Master and Ch3 as slave 100% forward and reverse. I haven't run this radio for many, many years so I don't even have the program on my laptop anymore... it's hard for me to do a follow up on this video...
@@progressive_rc that u so much for the reply. I will loom at the master and slave option. I had this radio sitting around for years. So i figured iwill try to make use of it now. Thank you again
Illogical Reasoning this will work with any kind of motor. Brushed or brushless. The type of motor depends on the ESC that you use. It is totally independent of the radio setup.
@@progressive_rc how to have the 2 key at self centre? Mine is Mode 2 transmitter, flysky ct6B, is it possible to make the first joystick self-centred?
Em termos de RCCrawlers tens um forum português (www.rccrawler.pt/forum/) e internacional (www.rccrawler.com/forum/) No FB também consegues encontrar. Procura os grupos: RC Crawler Europe PNSAC Crawlers Pro Shafty & MOA Group Certamente existem mais, mas eu estou nestes...
i made a video on How to install the Frsky module in the flysky CT6B, i believe that you can also use this process to connect any module of your choice also to the transmitter with the steps i have listed.. so check out the video with this link. ua-cam.com/video/VdQ5vigHoyE/v-deo.html
Bro you helped me a lot I didn't find any more informative video than this. Thank you very very much❤
Hi does one controller can be binding to 5 receivers to use on 5 vehicles?
Hello, will this computer program work with the current line of flysky radios such as the fs-i6x? Is it possible to program a fs-i6x to control wheels as you did ?
Hello.
I don't know if this program will work with anything newer radios...
I'm quite sure it is possible to control a MOA car the same way as I did on a newer radio.
I moved from this radio to a turnigy 9XR many years ago and now I will try the Radiomaster Zorro.
Programing will be done the same way.
Could u explain how to make the throttle self centering please?
Hi, sorry for the late reply.
I made the part myself. It's very easy to make with a dremel and some hard plastic.
*****
Is there a guide on how to do it yourself?
xxgg
I don't have any guide...
I just took one self center part off and made a copy, out of plastic that I had laying around, with the dremel and knife.
Then you need to find a spring and put it in place.
just go for it, it's very simple to make.
im using 2 servo as wheel for my robot,how to make it forward reverse and left right using 2 channel only? i hv problem with the mix and reverse, please help me
That's truly awesome
how did you program ch3 for forwarding and reverse? i can't seem to make the motor go in reverse. plz help
Hi,
You have to make Ch2 as Master and Ch3 as slave 100% forward and reverse.
I haven't run this radio for many, many years so I don't even have the program on my laptop anymore... it's hard for me to do a follow up on this video...
@@progressive_rc that u so much for the reply. I will loom at the master and slave option. I had this radio sitting around for years. So i figured iwill try to make use of it now.
Thank you again
How can I do the self centering? Where could I buy the parts?
Sir,
without using tekin fxr, can I do ? by using only arduino and dual h bridge motor drivers?
Can I control two motors seperately, my steering is by a motor not servo ....
Hello, can you please tell me if this setup is possible with a brushed DC motor? Thank you.
Illogical Reasoning this will work with any kind of motor. Brushed or brushless.
The type of motor depends on the ESC that you use. It is totally independent of the radio setup.
Are you using all drone esc and receaver
No.
At the time I shoot this vídeo there were no shuch things 😅
I used double Tekin FXR's.
But it works with any esc...
@@progressive_rc I'm trying to figure out a way to use my broken qx350 drone Electronics on my 2001 at Frances Team Losi stadium truck
@@progressive_rc dx5 transmitter
can you use this tx for four wheel steering?
S30Uploads Never tried it myself but I'm you can.
It has 6 channels so I can't see why not...
are you from Portugal? i am asking because of
"Sagres" bear cover on your Crawler
Sagres beer all the way!
Sim, sou português...
Sir,
Can you please tell me, what motor controllers you are using?
Hi.
I am using 2 Tekin FXR that were smashed together to occupy less space.
how did you get the left hand stick to return to centre automatically??
I made a plastic part with a dremel and add a spring...
The part is simple to make, you just have to copy the other one.
cool. good to know. thanks!
Can you send the config?
I don't see why not...
As long as you have two ESC you can control two motors seprately, no matter what they are going.
how come mine dont have reverse?
Hanayume Aizawa do you have the two sticks with self center?
It can also be the ESC configuration...
@@progressive_rc how to have the 2 key at self centre? Mine is Mode 2 transmitter, flysky ct6B, is it possible to make the first joystick self-centred?
@@anitadeore3973 I hopened the radio, made a small plastic part with the dremel and added a spring. It's relatively easy job ;)
@@progressive_rc can you please make video of it? And please share the connection and circuit diagram of this crawler project.
tens alguma pagina no facebook?
Sim, tenho facebook, mas para que queres?
OK obrigado
gostava de ver mais coisas de carros radio controle...
Em termos de RCCrawlers tens um forum português (www.rccrawler.pt/forum/) e internacional (www.rccrawler.com/forum/)
No FB também consegues encontrar.
Procura os grupos:
RC Crawler Europe
PNSAC Crawlers
Pro Shafty & MOA Group
Certamente existem mais, mas eu estou nestes...
Hey bud I sent you a pm on rccrawler.com I'm going to try this on a spare berg I have.
i made a video on How to install the Frsky module in the flysky CT6B, i believe that you can also use this process to connect any module of your choice also to the transmitter with the steps i have listed.. so check out the video with this link. ua-cam.com/video/VdQ5vigHoyE/v-deo.html
Sagres ??? so podes ser tuga:)
Tuga e com bom gosto na cerveja! ;)
é uma das coisas que só discuto quando esta vazio :) hihi