I just got my first 450 helicopter with the FS-CT6B transmitter and this video is great. The book that comes with it leaves one in the dark but this video has gone through everything and the bird works great now. Thanks
I have to give you props on this video. one of the best i have ever seen on UA-cam or anywhere on the internet. think the people that make the transmitter & elect. should be offering you a job as the president of the company. Wish i would of found this video along time ago would of save me from crashing my heli 2 times now & from 1 time the heli crash in my house after complete spooling up in the house it was scarey and those blades really hurt when they hit you my leg was swollen 4
Thank you for this complete and instructional video. Used this video to get going on the CT6B for my Align Trex 450 SE and HK 450 SE V2 clone. Just purchased the FS T6 now that I have more experience. Again,Rock solid video instruction! Keep them coming.
Thanx man! For a weeks i'm looking for such extensive tutorial for station config!. Can you please write what channel is every servo, because it's seems that in video you say different things. I owe you a beer!!
Great video, and it helped me alot. I tried flying my Trex450 with the "stock" radio program, and let's just say it was difficult. I set it up per your video, and I started hovering right away. One thing I would like some help with, the aileron movement is very sensitive for my liking (I only have to move the sticks 1/8" or so to damn near turn it upside down...). Is the dual-rate programmable without assigning a switch? I'd like to slow the aileron rates down alot, to keep from overcorrecting.
chris lambert. did you ever find out your question about the sw a switch for throttle cut. I am having the same exact problem and was hoping you had an answer.
Can I use these videos to set up my Tarot 500 with this radio? Are you sure that the gyro wires going into the receiver have the CH5 yellow single wire and CH4 green wire towards the sticker? Mine will only plug in backwards to what you posted in the comments. Is my GY401 wired backwards? I think it's a fake one. Thanks for the great videos!
this is the best vid on youtube, but i have a problem, as soon as i flick the sw,a swith for the throttle cut out to try and fly it, it ALLWAYS starts up at about 35% throttle and i cannot make it stop spinning without hitting the kill switch. and i followed you instructions exactly as you say. im v frustrated as i dont know how to fix it and really wanna fly it. someone please help do i have a faultly transmitter or anything?
hello the FS-CT6A the receiver makes BIND; Looking receiver but do not know the receiver plays, you will now tell me the receiver to buy for helicopter (there and receiver plane ??)
Thanks for this video man, i spend 3 hours in the menu, and then the motor does not start. whith your walkthrough it works perfekt, but i dont understand your settings in the Mix-menu. Doesnt matter, it runs, thanks from cologne, Germany
thanks. i am having issues with the FS ct6b and no forum has the answer. I cannot get the transmitter to save the settings on a mac or pc. i have no idea how to reverse the sticks because it is not allowing me to save. Any idea?
Hello, i have a question. When i go to open up the t6 program i have a message that says invalid port number. Any stick movements or adjustments i make do not register. I looked on a forum and it said something about you needing to select a specific COM port. Could that be my problem?
I am having a problem my throttle isnt working when I push the throttle saftey on right side thats when power goes to motor. When I watch what your doing some of what you have said to number you say 276 and what I see is only 76. Is what I see whats supposed to be or the numbers you say. Thanks
I just got my first 450 helicopter with the FS-CT6B transmitter and this video is great. The book that comes with it leaves one in the dark but this video has gone through everything and the bird works great now.
Thanks
I have to give you props on this video. one of the best i have ever seen on UA-cam or anywhere on the internet. think the people that make the transmitter & elect. should be offering you a job as the president of the company. Wish i would of found this video along time ago would of save me from crashing my heli 2 times now & from 1 time the heli crash in my house after complete spooling up in the house it was scarey and those blades really hurt when they hit you my leg was swollen 4
Thank you for this complete and instructional video. Used this video to get going on the CT6B for my Align Trex 450 SE and HK 450 SE V2 clone. Just purchased the FS T6 now that I have more experience. Again,Rock solid video instruction! Keep them coming.
this is the best t-6 video setup from any youtube member
VERY helpful. I've had to purchase a second Hausler 450 with the same radio since the factory settings were so screwed up and caused a fatal crash.
Thanx man! For a weeks i'm looking for such extensive tutorial for station config!.
Can you please write what channel is every servo, because it's seems that in video you say different things.
I owe you a beer!!
Great video, and it helped me alot. I tried flying my Trex450 with the "stock" radio program, and let's just say it was difficult. I set it up per your video, and I started hovering right away. One thing I would like some help with, the aileron movement is very sensitive for my liking (I only have to move the sticks 1/8" or so to damn near turn it upside down...). Is the dual-rate programmable without assigning a switch? I'd like to slow the aileron rates down alot, to keep from overcorrecting.
chris lambert. did you ever find out your question about the sw a switch for throttle cut. I am having the same exact problem and was hoping you had an answer.
Can I use these videos to set up my Tarot 500 with this radio?
Are you sure that the gyro wires going into the receiver have the CH5 yellow single wire and CH4 green wire towards the sticker? Mine will only plug in backwards to what you posted in the comments. Is my GY401 wired backwards? I think it's a fake one.
Thanks for the great videos!
congratulations, nice vídeo dude!
first of all great video
but,when i enter to the T6config i cant choose another option in the settings
please help me !
@2010HeliPad
Oh, yeas, it helps :)
I cant believe that now i'm in process of connecting cable ties :)
great video man, I think i would have thrown my heli away if i didnt find this video.
this is the best vid on youtube, but i have a problem, as soon as i flick the sw,a swith for the throttle cut out to try and fly it, it ALLWAYS starts up at about 35% throttle and i cannot make it stop spinning without hitting the kill switch. and i followed you instructions exactly as you say. im v frustrated as i dont know how to fix it and really wanna fly it. someone please help do i have a faultly transmitter or anything?
hello the FS-CT6A the receiver makes BIND; Looking receiver but do not know the receiver plays, you will now tell me the receiver to buy for helicopter (there and receiver plane ??)
Thanks for this video man, i spend 3 hours in the menu, and then the motor does not start.
whith your walkthrough it works perfekt, but i dont understand your settings in the Mix-menu.
Doesnt matter, it runs, thanks from cologne, Germany
Thanks again in 2023
thanks. i am having issues with the FS ct6b and no forum has the answer. I cannot get the transmitter to save the settings on a mac or pc. i have no idea how to reverse the sticks because it is not allowing me to save. Any idea?
Hello, i have a question. When i go to open up the t6 program i have a message that says invalid port number. Any stick movements or adjustments i make do not register. I looked on a forum and it said something about you needing to select a specific COM port. Could that be my problem?
Hi I cannot get any com ports to show under settings? its all blank please help.
channel 5 and 6 are not working on my fs-ct6b.please help to solve this problem
I am having a problem my throttle isnt working when I push the throttle saftey on right side thats when power goes to motor. When I watch what your doing some of what you have said to number you say 276 and what I see is only 76. Is what I see whats supposed to be or the numbers you say. Thanks
@2010HeliPad hi can i use this radio with any simulator like realfliigh G5 or reflex or any simulator? plzz reply/// thnxx
When I go to adjust my endpoints the servos jump and over half the time theywont adjust and I need them to. How can I fix this?
i did the same thing you dd but my radio is not moving nomatter what i do
ciao ho messo fuori posto il programma t6 elicottero è possibile
Respect the beard
VERY informative Thankyou
how do I reset all my t6 config
?