Hey bro would you say the 1” drop springs was exactly 1 inch? I wanna go from 4 to 5 inches in the front. I don’t want it to rub so I hope it’s exactly an inch or a little less
@@jeffreyolivas thanks bro is that i wanna drop my truck 10 inches but my brother said va a pegar el tanque en piso something like that but thank u bro
Wondering if you could help me with this I lowered mine for 9 inch in the back but my driver side tire is rubbing through the plastic to the fuse box wiring harness how to fix it if you got any ideas
I cut little slits on the inner part of the quarterpanel and then once they were cut i hit them with a rubber mallet to make it almost flat bro and then once that was done i was good but if you are on low pros u should be good
So you cut your crossmember. Also bro, did you fix your pinion angle ? Cause it has to be in a certain angle to operate correctly if not it’ll fuck your tranny seal up, needs to be at a certain degree, just tryna find out if you did, if so how, I put pinion angle shims but didn’t mean too much , I’m at 10in in the back
It all depends on the size wheels bro if u runnning 24s u gona rub bad since ur pitting the shaft closer to the crossmember. When i was on 17s it was perfect but then on 22s i did rub more. I suggest notching the crossmembers bro
It all depends on the size wheels bro if u runnning 24s u gona rub bad since ur pitting the shaft closer to the crossmember. When i was on 17s it was perfect but then on 22s i did rub more. I suggest notching the crossmembers bro
I’m sitting at a 5/8 drop on my extended cab rn but I have a rear rake nothing too crazy but I’m thinking I wanna go to a 9” drop in the back should I just buy 1” drop blocks or 1/4” it’s nothing too crazy but idk
did you fully cut the crossmember where it holds the gas tank or did you just notch it for clearance
Good shit bro! Just subscribed!🤘🏽
La Guera bet g 🔥new videos coming this week
Hey bro would you say the 1” drop springs was exactly 1 inch? I wanna go from 4 to 5 inches in the front. I don’t want it to rub so I hope it’s exactly an inch or a little less
Yes bro it’s about 1 inch or less it’s barely noticeable
Sick
Thanks bro💯🔥
Rip to the tank 🤦🏽♂️
Never had a problem with the tank⚡️🥱
Where did you order the drop blocks ,mine won’t line up right and it ends up being offset from the axel flip kit
Got mine of ebay, look up in there
What’s the song called when you were showing the white truck ?
Cumbia calejera
2:20 , what’s dat on top of the block , where’d u get it ? it’s in between the diff and the block , it’s like wrapped in the diff
Thats part of my drop kit bro thats how they come from DJM
hey bro When you dropped your truck did you move the gas tank to another part or u just leave it where it originally was?
I never did anything to the tank bro but i was planning on lifitng it up 2” inches
@@jeffreyolivas thanks bro is that i wanna drop my truck 10 inches but my brother said va a pegar el tanque en piso something like that but thank u bro
@@luisangelgarcia3553 yeah bro it is gona scrape but it aint too bad tbh
@@jeffreyolivas alrrr thank u bro
Did you have to go with a 2 piece drive shaft?
Negative one piece
Wondering if you could help me with this I lowered mine for 9 inch in the back but my driver side tire is rubbing through the plastic to the fuse box wiring harness how to fix it if you got any ideas
How low are you on the front?
Can you send me measure of where you cut the bed for the notch?
I dont have the truck no more
Algún día tendré una troca así roja,chaparrita y chingona
Todo se puede 🔥
Ya la tienes carnal ?
i want a 4/8 drop on 22s do i have to cut my bed? 04 chevy
Na u good bro
1:20 what's the name of the song and u guys have some clean trucks
Thanks g & its called El ferrocarril slowed version
No problem g , but that's not the song bro
Where did you get your lowering blocks and do you have the link?
On ebay bro the link dont exist no more
Saludos desde Chicago
Saludos primo🔥🔥
my truck on a 4/8 and i put 2in drop blocks to make it to a 4/10 and my cross member was hitting my drive shaft
Urs a exteded cab or single cab? Mine was a single cab and i just cut the crossmember for the gas tank and i was good
Did you cut or rolled for the back so it won’t rub?
I cut little slits on the inner part of the quarterpanel and then once they were cut i hit them with a rubber mallet to make it almost flat bro and then once that was done i was good but if you are on low pros u should be good
how did you fix your pinion angle on the differential
Dint have a issue with that tbh
Fallowing saludos desde Lexington Nebraska
Saludos primo
So you cut your crossmember. Also bro, did you fix your pinion angle ? Cause it has to be in a certain angle to operate correctly if not it’ll fuck your tranny seal up, needs to be at a certain degree, just tryna find out if you did, if so how, I put pinion angle shims but didn’t mean too much , I’m at 10in in the back
Did you rub on the crossmember I’m rubbing
do you need flip kit before adding drop blocks
Yeah bro because the u bolts are longer and the plate
Quick question bro how much do you be hitting your frame now😂?
Like scraping bro?
@@jeffreyolivas yeah
Where did u buy the blocks and how much cuhh?
Got them on ebay bro i belive $50 bucks with everything needed
Do you have a link for the drop blocks bro?
There it is g
www.amazon.com/Suspension-Solid-Blocks-Square-Spring/dp/B017JF5PHQ/ref=mp_s_a_1_6?dchild=1&keywords=lift+blocks&qid=1609466493&sr=8-6
@@jeffreyolivas appreciate it bro
I don’t get it if it says lift how would that lower 2 inches if it says lift 2 inches
Does the drive line hit the frame?
No sirrrri i cut the crossmember that holds the gas tank and i was fine
Did you rub on the crossmember I’m rubbing bad
It all depends on the size wheels bro if u runnning 24s u gona rub bad since ur pitting the shaft closer to the crossmember. When i was on 17s it was perfect but then on 22s i did rub more. I suggest notching the crossmembers bro
It all depends on the size wheels bro if u runnning 24s u gona rub bad since ur pitting the shaft closer to the crossmember. When i was on 17s it was perfect but then on 22s i did rub more. I suggest notching the crossmembers bro
Does anyone know where I can get something lower than a 5/7 drop kit?
I’d buy a 5/7 drop kit bro and then add blocks after in order to go lower
Donde puedo conseguir Los lowering blocks bro 💯🔥
Yo los compre en Ebay bro
La Trokita Roja como Los puedo buscar en eBay bro ? Son universal
Hey bro how you running a 4inch drop upfront with 17s ?
I was dropped on control arms bro with stock spindles
Oo I see bro because I have a 3/8 but when I wanna put my spindles it hits with 17s I’m wanting a 5/8
@@JustABlackTacoma go back to stock spindles & run control arms & springs
What are the wheels on the white truck? 👍
24” Escalade Rep wheels bro
Do you have drop shackles on this truck
Yess 2” shackles
I’m sitting at a 5/8 drop on my extended cab rn but I have a rear rake nothing too crazy but I’m thinking I wanna go to a 9” drop in the back should I just buy 1” drop blocks or 1/4” it’s nothing too crazy but idk
Patrick star?
Yes sir live in action
What wing is that on the red truck
Cresspo wing
what tire size you running bro
Honestly cant remember man its been too long
Ay bro how did you go from 4 in the front to 5? I wanna go from a 4/9 to a 5/9
I added 1 inch drop springs i was on oem ones
@@jeffreyolivas Thanks bro. And where did you get the lowering ones from? Or what brand are they?
@@cristianSanchez-ln6pu honestly they were ebay brand bro but they rode good tbh not bad at all i had belltech shocks with them as well
@@jeffreyolivas can you send the link bro?
@@cristianSanchez-ln6pu there it is bro ---> www.ebay.com/itm/392613045819
Ur on monster notch bro I got a under bed would it’ still work?
No bro it wouldnt work
Are you going to put airbags on the truck cuh
Sold the truck like 1 year and half ago
Where’d you get your blocks from bro ? Link?
www.ebay.com/itm/264685174423
Albert Diaz that’s what i got bro
@@jeffreyolivas u have new link?
What tire size you running on the stock steels right now
On front 275/70/17 and rear 265/55/17
La Trokita Roja does it rub in the front?
Kaspar40oz not at all bro
La Trokita Roja do u have mini tubs or rolled fender?
Kaspar40oz full tubs with fenders rolled as well
Monster notch or underbed notch?
Monster notch
@@jeffreyolivas i got a extended cab bro, I was wondering what’s better having, the 2 bars or single bar ?
@@ramonguerrero9359 2 bars bro for sure
What drop shocks bro for rear for that drop what do I need
You need a flip kit, Shackles, 2” blocks
That will put you at a 10” drop
@@jeffreyolivas can you tell me what shocks would I need could I use my stocks bro
@@TonyLopez-ww7ko u need belltech shocks bro look them up
@@jeffreyolivas which part #
What size are the u bolts bro ?
Honestly cant remember bro they came in the kit with the Drop blocks
V6 gang or V8?
V8 bro
Esta.n chingonas
Gracias primo🙏🙏🙏
Hey primo. Aver cuando areglas mi troka. 2003 chevy silverado
@@sergioramirez5417 que tiene? Hmu on insta @strictly_statik