Another episode of OSHA violations.. but I love it!!! Keep the videos coming. I have a 94 6.0 swapped and always enjoy seeing what you guys are going to do next.
I have seen just about every truck out there get a step notch before. Many I have done myself, but every time I still get all giddy like a lil girl when it's done! I love how you said need to trim the bed floor a bit, most would think die grinder maybe a lil hand held electric one. Nope! Not your dad! He busts out a 12" spinning wheel of metal be gone tool!! LoL you guys did an awesome job on it!!
I plan on doing a C-notch to my race truck. Mine is a 96 Ram long bed. It's also a v6 auto currently but is getting a 360 swap real soon. Watching these videos (even though these are GM and mine is Dodge) is really inspiring me to get mine started. I'm thinking drop spindles up front, axle flip and notch the rear. Engine and trans swap. Maybe a procharged or a Cummins turbo...but either way thanks for the motivation.
Almost ready for a 4 link set up lol. A few brackets,tubeing and hime joints. I remember bout 8 ish years back, I helped a buddy build the frame for a 84 ram. Bags, full back half, links, custom frame.Had the help of lazer cutter though. Just a big puzzle lol. Anywho, thats gona be looking sweet when your done.
Love what you're doing. I've got a 92 fleetside that i just dropped a built 489cid bbc into. I can't wait to start beefing up the drivetrain then suspension to hit the 1/4 mile. I'm hoping to get it under 4,000 lbs and get into the 10's with it.
Love watching the progress on Black Jack man, been subscribed since you got it! Always have had a soft sport for OBS trucks and you’re giving me great ideas for a future project of mine
If you want to get rid of that rust on the frame try using rust converter primer, I highly reccomend it did it on my 92' stepside. After you can coat it with paint to make it last longer.
I love the way it looks especially bein a step side and lowered looks 10x better in my opinion. That thing is dirt nasty low lol if I had it and it was lowered like that id have to get me some baby moons and put on it
Man that looks amazing!! Some fresh paint and some headlight/taillights would make this a real head turner at the track!! But I still love the look of it now man. Y’all did a hell of a job!
Have you considered to make an aerocap for the bed to get rid of the air pocket that trucks have behind the cab? I'm sure you could do it pretty cheap and end up gaining from it somehow. Idk just a thought . Keep on kicking ass 👍🏻🔥
To I saw video that you have to lower the truck before you notch it to find the center the frame I am working on is stock hieght at the moment do you know if this is true to put on the lowering kit first before I notch it
Nice job. What do you have for front lowering so far? Dropped spindles and coils put the bottom bumpstop a millimeter from the frame. Gonna need a smoke wrench solution for the front now.
I am getting ready to do the same thing my beds all off just been waiting for you to do yours so I can get a idea now I can start cutting her up thanks great video
Yall definitely take some pride in yalls work,,badas work n project yall have man,, definitely take the meaning (backyard engineering) to the next level!!keep up the good content guys,if possible give me a shootout @EnriqueGarza been following yall channel for a while now 😎
Talk about nervous We cut a brand new at the time 2018 f150 frame to c-notch it because a kit wasn’t made yet. It was for a disabled man who had to use a wheel chair. The truck is waaaay low.
they make a set of wheels that look identical to weld pro stars but they're knockoffs and alot cheaper!! but they're seriously identical! those would look so killer
Damn homie nice build you have going on. Love your vids. Keep up the good work man. On a side note how much would you charge to send a c-notch made by you out to FL 😎
The fenders on the step side trucks are fiberglass, so the lip you hammered I just completely cut off. You might want to just rent or borrow a fender roller and pull them out a touch. Or do like I've done in the past and use a baseball bat and have someone drive ahead slowly lol
I’m sure you got flamed in the comments already but you never wanna cut the frame until the notch is pretty much installed and welded for integrity of the frame and use A saws all or cut off wheel for a cooler method other than blow torch
I had to go back and rewatch to make sure, but you can see in the video that I get the notches like 80% welded in before the frame is actually cut, on at least 3 axes. Torch isn't gonna hurt the integrity of the frame enough for me to worry about and its much cheaper and faster than a cutoff wheel. This truck has lifted the wheels since this was installed, its plenty strong.
Your dad loves that torch more than anything lol AWesome notch kit....saved $$$ and so much stronger than most
Man a hot wrench makes so many jobs easier
Another episode of OSHA violations.. but I love it!!! Keep the videos coming. I have a 94 6.0 swapped and always enjoy seeing what you guys are going to do next.
Gotta have over 10 employees to meet OHSA requirements. Shops smaller than that are exempt.
Listen to your old man. Looks awesome with the front end sitting theway it is.
I just can't do it lol I do want to build a gasser someday, but this ain't gonna be it lol
I have seen just about every truck out there get a step notch before. Many I have done myself, but every time I still get all giddy like a lil girl when it's done! I love how you said need to trim the bed floor a bit, most would think die grinder maybe a lil hand held electric one. Nope! Not your dad! He busts out a 12" spinning wheel of metal be gone tool!! LoL you guys did an awesome job on it!!
I plan on doing a C-notch to my race truck. Mine is a 96 Ram long bed. It's also a v6 auto currently but is getting a 360 swap real soon. Watching these videos (even though these are GM and mine is Dodge) is really inspiring me to get mine started. I'm thinking drop spindles up front, axle flip and notch the rear. Engine and trans swap. Maybe a procharged or a Cummins turbo...but either way thanks for the motivation.
Almost ready for a 4 link set up lol. A few brackets,tubeing and hime joints.
I remember bout 8 ish years back, I helped a buddy build the frame for a 84 ram. Bags, full back half, links, custom frame.Had the help of lazer cutter though. Just a big puzzle lol. Anywho, thats gona be looking sweet when your done.
8:35 for the money shot, right in the face. Lol. Awesome vid, maybe I'll grow a pair and finally cut mine up. Thanks for posting.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐
Love what you're doing. I've got a 92 fleetside that i just dropped a built 489cid bbc into. I can't wait to start beefing up the drivetrain then suspension to hit the 1/4 mile. I'm hoping to get it under 4,000 lbs and get into the 10's with it.
I love it. Great montage of sparks and pretty blues. I like how you think outside the box and get this stuff done on a budget. Good and functional.
Love watching the progress on Black Jack man, been subscribed since you got it! Always have had a soft sport for OBS trucks and you’re giving me great ideas for a future project of mine
Now that's top Notch fabrication. Anytime Captain Inferno make an appearance, the project will be a success.
If you want to get rid of that rust on the frame try using rust converter primer, I highly reccomend it did it on my 92' stepside. After you can coat it with paint to make it last longer.
Dude it tucked the monster truck tires very nicely, looks so good,
Hell fn yes!!!! That thing is sitting Tight! Great work guys.
I love the way it looks especially bein a step side and lowered looks 10x better in my opinion. That thing is dirt nasty low lol if I had it and it was lowered like that id have to get me some baby moons and put on it
Man that looks amazing!! Some fresh paint and some headlight/taillights would make this a real head turner at the track!! But I still love the look of it now man. Y’all did a hell of a job!
Have you considered to make an aerocap for the bed to get rid of the air pocket that trucks have behind the cab? I'm sure you could do it pretty cheap and end up gaining from it somehow. Idk just a thought . Keep on kicking ass 👍🏻🔥
All they needed was a torch and a Chicago welder !!! Beat that Jesse James!! You gentlemen earned my respect ✊!!!
So badass brotha can't wait to see her going down the track!!
Looks good especially if you've never done it before. I kinda like the stance and should help weight transfer
Awesome job!! Looks much better.
Doctor Dad-structo does some good work! And you, too! Looks amazing. Can't wait to see it all done and rollin' down the road. \m/
That looks sofa king bad ass!! You guys did an amazing job. I can't wait to see what's next.
Best video yet very impressive guys great work
This video is a great way to start the week! Looks badass.
The fire chief love that fire ax. Your dad is a machine with that. Love it.
I like it with those wheels I think they could use center caps and it’ll look sick af once the front is lowered
To I saw video that you have to lower the truck before you notch it to find the center the frame I am working on is stock hieght at the moment do you know if this is true to put on the lowering kit first before I notch it
I love how it sits now. I would probably leave it like that
Truck looks awesome. Good work keep it up.
Nice job. What do you have for front lowering so far? Dropped spindles and coils put the bottom bumpstop a millimeter from the frame. Gonna need a smoke wrench solution for the front now.
I am getting ready to do the same thing my beds all off just been waiting for you to do yours so I can get a idea now I can start cutting her up thanks great video
I cheated on the bars. They're all 30 degree cuts. Worked out really well lol
Yall definitely take some pride in yalls work,,badas work n project yall have man,, definitely take the meaning (backyard engineering) to the next level!!keep up the good content guys,if possible give me a shootout @EnriqueGarza been following yall channel for a while now 😎
Dude y'all kicked some serious ass on this!! Great looking fab work!! Looks like you have done several. Very impressive!!
Talk about nervous We cut a brand new at the time 2018 f150 frame to c-notch it because a kit wasn’t made yet. It was for a disabled man who had to use a wheel chair. The truck is waaaay low.
they make a set of wheels that look identical to weld pro stars but they're knockoffs and alot cheaper!! but they're seriously identical! those would look so killer
Ebay 4 link with bags delivered start at 200 bucks just so you know 👌keep grinding its really starting to come together
Great job bro! You did some sik welds too! 👍🏽🔥💯
Sick!!! It's making me miss my old truck lol same low but it was a striaight bed
That looks awesome man 👏🏽 . wish you could do mine like that 👌🏽
That came out absolutely beautiful
Two maniacs at work! Love your vids and good luck with the rest!!
Milk crates and a sheet of plate as your wilding. Crazy, hey man whatever works brother.
Killer!!!!
That truck just needs a diet and time for the track
Pops is a surgeon with that flame wrench. Nice welds, maybe not “Instagram hard”, but It was enough for me
What tire size on the back your runing? Innthe video?looks great man
Gotta love dad he be game for what ever,you should do something special for him ,just a thought great vid as usual
Well, I mean I am gonna let him drive the black truck. That's why we went with the small block instead of an LS.
Damn homie nice build you have going on. Love your vids. Keep up the good work man.
On a side note how much would you charge to send a c-notch made by you out to FL 😎
lol how much you willing to pay?
Time for a 4 link and a panhard bar and coilovers! He's starting to look like a bad mammer jammer guys
Yep weld beadlocks will be epic on this thing
Your dad and that chop saw blade again, reminds me of my dad
The ol man is gangsta as f#%k !!! I always enjoy the vids Brutha ! Sitting NICE !! Fa sho !! Hey real Talk you was oozing with PRIDE there for a bit !
Ol man liking that Cali Lean
That looks so fucking sick man!!!
Tjats gonna look good af
My favourite part was when he tried to put the fire out with a spanner 😂
Wow 😱😱 nice looking truck bro I'm working on a 97 myself over at my channel
Great job looks awesome
“It’s not going to make anyone on instagram hard.” Lmmfao🤣😂🤣😂
Hey that looks awesome and it is going to hook so much better now can't wait to see the track video...your the reason im starting my youtube channel
That's awesome, man! Can't wait to check it out 🤙
Hell year man looks cool I think my dad is doing a 2/4 drop and I’m buying 17” wheels
You guys killed it you dad don’t play lol truck looks sick af
Put a fleet side bed on it bro. Looks badass tho.
That’s sweet great work!!
Yessss
1. JB looks sick!!!!
2. The look on your face when you first dropped the frame!
3. I cringe every time i see Papatron with that fricken death-wheel!
I was watching the blade on it the other day and I can't believe it hasn't come apart yet. He had that thing flexing like crazy!
@@SniderTron3000 CRAZY ain't the word for it! Haha
Don't give a F**K if I'm first or not! Happy as F**K to be watching another SNIDERTRON 3000 video!
Fucking work of art!!! Looks amazing
Awesome
Lol if you say let's build a space ship dad be like let me get my tourch, gotta love him
looks great man
Great fabrication skills.
Your Dad is awesome Josh; his motto is go with a big disk or go home. lol
I’m surprised you guys are still conscious after all that smoke in there. Lol. Good work though!
U tuck more than that ,we'll call u buffalo bill !!! Just kiddin looking good guys
👍
Would you LOOK AT THAT!!?? Just LOOK AT IT!!
What materials did you guys use ?
JB is looking good man, now you just need to find a Kyle Gass and you will have the greatest band in the world,lol.
Yal did a good job on that
Sick af
Sniddertron 3000 sr. Sure loves that torch
Another question, sorry lol, but with just the flip and notch, how much did it lower it?
Just a flip kit is usually around a 6" drop
I always say when in doubt tourch it out!
Did you all put the leaf springs under the rear end and flip the u bolts?
Yeah, I think that's what we did
SniderTron 3000 I ended up watching the further videos and they answered my questions lmao thank you
Just busting your chops on the table mine wasnt any better love the death wheel
Nice work
I love it! it looks really good!
Cool stuff man 👍😎
Hi what is the exact measurements you used?
You guys are awesome
I think you did a great job
How did you cut the finders with and wht did you use
when you say you cut the fender.. what did you cut because my 95 rubs and i’ve just hammered it out cause i’m scared to put a cutting wheel to it
The fenders on the step side trucks are fiberglass, so the lip you hammered I just completely cut off. You might want to just rent or borrow a fender roller and pull them out a touch. Or do like I've done in the past and use a baseball bat and have someone drive ahead slowly lol
SniderTron 3000 i’ll try the bat method or with a piece of tubing thanks 👍🏼👍🏼
Are use my mig 170 I was skeptical at first but it has proven itself over and over I see you’re no stranger to it
Sick welds bro!
How much clearance does that notch give you
I’m sure you got flamed in the comments already but you never wanna cut the frame until the notch is pretty much installed and welded for integrity of the frame and use A saws all or cut off wheel for a cooler method other than blow torch
I had to go back and rewatch to make sure, but you can see in the video that I get the notches like 80% welded in before the frame is actually cut, on at least 3 axes. Torch isn't gonna hurt the integrity of the frame enough for me to worry about and its much cheaper and faster than a cutoff wheel. This truck has lifted the wheels since this was installed, its plenty strong.
Looks real good 🤙🏽
Take that pride baby
Looking awesome !!!!