Motor Mount BLEW UP |motor was sagging| NO damage!!

Поділитися
Вставка
  • Опубліковано 15 вер 2024
  • Huge thanks to AWR for making a great product. Not sponsored at all, would be nice if I was though! They are also right the bushings do loosen up a bit around 500-600 miles and the vibration dies down a good amount. Over all very happy with the purcahce and the install was fairly easy.

КОМЕНТАРІ • 25

  • @MTHLOWKEY
    @MTHLOWKEY Рік тому +1

    My guy putting all his trust in those plastic ramps with no jackstands or tires to save you from getting crushed. You brave for that 😂

    • @Michael_Carroll
      @Michael_Carroll  Рік тому

      Yeahhhhhh when I was under there with the RMM out and the motor was rocking I was looking around like … I’m in danger😅 definitely won’t be doing that anymore

  • @michaelsachs-gp8qh
    @michaelsachs-gp8qh Рік тому +1

    Getting ready to put in a COBB

  • @emilycasaceli3124
    @emilycasaceli3124 Рік тому

    The background music is so good!!

  • @cliftonmcintosh6193
    @cliftonmcintosh6193 8 місяців тому +2

    I had to change mine just at 45.000 not good enough Ford rear mount change as well to mountune (yes it does look like that) 👏🏿👏🏿👏🏿

  • @michaelsachs-gp8qh
    @michaelsachs-gp8qh Рік тому

    A lot off people that do their rear mount say it's weird at first hear some noies but it brakes in after a couple of miles and it's fine, don't know anyone that had to do the front mounts so not sure what to say please keep us updated.👍

    • @Michael_Carroll
      @Michael_Carroll  Рік тому +1

      The vibration and rattling has gone down a lot one I hit the 600 mile mark!! Still feels amazing, and not hearing as many noises anymote

  • @thijsrooijakkers2153
    @thijsrooijakkers2153 Рік тому

    Well that's not good to find out your motor mount has shat itself. Good excuse to upgrade it to something better. Upgraded my rear motormount to the mountune version, still rocking my stock driverside and passengerside motormount. Am planning to change out the passengerside motormount for a new oem one -before it gets destroyed- and at that time also put in some powerflex bushings for good measure. Thanks for the video, it will help me out when I will be upgrading my motormount. Please say hi to the family and give the dog an extra cuddle. Greetings from the Netherlands, #TrueOG

    • @Michael_Carroll
      @Michael_Carroll  Рік тому

      Much love for all the support Thijs and thank you for the comments!

  • @michaelsachs-gp8qh
    @michaelsachs-gp8qh Рік тому

    I have the 2018 ST 4,000 miles 3 oil changes just dis mine Amsoil getting ready to install cold air intake Injen, Radium aluminum PVC plate get rid of that plastic garbage and then install the Radium PVC catch can and then I will put it on a proper lift and install my MBRP off road down pipe which they dont make any more, new MBRP stainless exhaust full 3" which I modified a little and Cobb motor mount at the same time a lot easier if I pull the exhaust then the down pipe and then the motor mount on a real car lift so I can stand up and see whats going on and then put in motor mount, then down pipe and then exhaust all in one shot and add a new tune to my cobb acess port. 😊

  • @ethanotto7089
    @ethanotto7089 Рік тому

    I have the awr mounts as well and my motor makes the same noise you where hearing at the end of the video it’s normal I believe it’s just a stiffer mount so you hear it more. Also as you drive it more the mounts will break in some and vibrate a bit less.

    • @Michael_Carroll
      @Michael_Carroll  Рік тому

      I did notice that how literally around 600 miles things started vibrating less

  • @LA_Commander
    @LA_Commander 9 місяців тому

    With cars that are very low to the ground, it's much easier to use a jack and jackstands. It takes me less than 5 minutes to raise my ST to change the oil or whatever. Plus, you can adjust the height to fit your body (lol)

    • @Michael_Carroll
      @Michael_Carroll  9 місяців тому

      Yeahhhh I’ve been noticing that actually😂

    • @LA_Commander
      @LA_Commander 9 місяців тому

      @Michael_Carroll lol! Get a low profile jack from Harbor Freight. Makes life much easier

  • @michaelsachs-gp8qh
    @michaelsachs-gp8qh Рік тому +1

    WOW I have never heard of anyone blowing out or having to change thier passenger and driver front mount must have been a defective part that 🦨 every one hust does the rear mount.

    • @Michael_Carroll
      @Michael_Carroll  Рік тому

      Yeah I mean I have 96,000 miles on the car now not sure if it was wear and tear or what

    • @michaelsachs-gp8qh
      @michaelsachs-gp8qh Рік тому

      @@Michael_Carroll you can get a lot of miles out of a car the motor Mont should not blow up but you have moded the car and put some torc on the motor mounts so I guess it possible. Looks good for the mileage.

  • @michaelsachs-gp8qh
    @michaelsachs-gp8qh Рік тому +1

    How much were the front motor mounts and were did you order them from.

    • @pawdre5151
      @pawdre5151 Рік тому +1

      The passenger motor mount runs for $200 and the Trans mount runs for $220 from AWR.

    • @Michael_Carroll
      @Michael_Carroll  Рік тому

      I bought all the mounts in a bundle so you save some money that way… it was 535 for all 3 mounts

  • @michaelsachs-gp8qh
    @michaelsachs-gp8qh Рік тому

    What year is the ST again.

  • @michaelsachs-gp8qh
    @michaelsachs-gp8qh Рік тому +1

    SENT THAT OLD DESTRIED MOUNT TO FORD THATS BS.

    • @Michael_Carroll
      @Michael_Carroll  Рік тому

      I have 90k miles on the focus I feel like they’ll say it worked long enough😂