Sorry, I messed up with this New WLToys RC Car.

Поділитися
Вставка
  • Опубліковано 30 січ 2025

КОМЕНТАРІ • 180

  • @TomleyRC
    @TomleyRC  2 роки тому +22

    Massive School Boy Error by me. Apologies... I've updated accordingly and given myself a talking to about taping up your wheels if you go on Sand! It's actually not to bad once the diffs are sorted! shop.makerfire.com/collections/1-10-scale/products/wltoys-104019-1-10-2-4g-4wd-55km-h-brushless-high-speed-racing-car?aff=286

    • @FarmerFpv
      @FarmerFpv 2 роки тому +1

      You should punch holes in the top of the tires so the sand and water escape when driving. I do it to all my RCs with a leather punch. If the tires are already glued on using a brass tube in a drill and sharpen it by running an Exacto blade inside it then drill holes in the tire. I put 4 holes most people put just 2 holes. Rich Duperdash has a good video on how to do it with a brass tube.

    • @LGHTSPD675
      @LGHTSPD675 2 роки тому

      Tomley, I've bought 3 different WLToy RC Cars due to your videos. They are great value. But could still be some bizarre initial build quality or adjustment issues on this one, really twitchy handling has many culprits. It would be interesting to see the wheel alignment measurements. A little toe in at the rear and a smidge of toe out at the front can help straight-line stability for off road soft tire and suspended vehicles. Also a little negative camber on the rear helps as the travel on a-arm suspension changes the camber naturally over the stroke from fully compressed to full drop out (and vis-versa), crossing over the tire center line while the wheel is slipping/spinning changes the way the tire pushes on the vehicle. That tire hop and differential lumpyness was a great observation, i couldnt tell if it totally fixed the issue or not. Keep us posted if you continue working it through it. Always appreciate honest reviews, something seemed wrong and you are helping us figure out.

    • @muhammadrifqi8024
      @muhammadrifqi8024 2 роки тому

      can you review the rc zd racing mx 07?

    • @JohnRobinsonRC
      @JohnRobinsonRC 2 роки тому

      HUGE thanks to you Phil. I just received my review copy and both diffs are locked. I never watch someone else's video before reviewing my own but your title was so cryptic and I am glad i did. What a pain they are to open though to get to the diffs! 🙄😳 But seriously. Thanks for the tip! have a lovely evening. 😊👌👍🏼

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      @@JohnRobinsonRC I'm glad you watched. It should means you'll have a better experience than me! I'll look out for your video... and yes, they are a right pain to access!

  • @Chio_OB
    @Chio_OB 2 роки тому +13

    It's a testament to your integrity to admit mistakes, good man!

  • @MCsCreations
    @MCsCreations 2 роки тому +13

    This just shows your ethics, Phil! Thanks a bunch and kudos!!!
    Fantastic review as always! 😊
    Stay safe there with your family! 🖖😊

  • @oneforall549
    @oneforall549 2 роки тому +8

    This is why I love this channel! Who else admits thier mess up and shows fixing it! Love honest reviews and this is were it's at! He actually reads his comments! So awesome! Thanks

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Thanks dude. I can't always reply to them all... but I certainly look at them

    • @oneforall549
      @oneforall549 2 роки тому

      @@TomleyRC see prefect example! Your Killing it dude!

    • @klippschliefer4968
      @klippschliefer4968 Рік тому +1

      The RC saylors done it before. They admited a mistake too, and except from Spectrum stuff, they review 100% honest.

  • @zarccarsandothertoys.572
    @zarccarsandothertoys.572 2 роки тому +15

    Great stuff, I really admire your honesty, that is quite literally your best character trait, well done once again on an excellent preview, review!!!

    • @TomleyRC
      @TomleyRC  2 роки тому +3

      Thank you. As well as giving fair reviews for you guys, I also like to be fair to the manufacturers as well.

  • @dougs2k808
    @dougs2k808 Рік тому +3

    Just got my WLtoys 104018 (Same as 104019 except different body) and can confirm the diffs are still an issue. I ended up designing and 3d printing a 1mm spacer for the diff housing so I could leave the little washers in.
    They also lacked grease on the inside and absolutely zero grease on the outside. Finally got to take her for a rip after I sorted out the diffs and greased them up. It's quite a good little 1/12 monster truck. Thanks for mentioning the diff issue!

  • @SharkysGarageRCandMore
    @SharkysGarageRCandMore 2 роки тому +8

    Yet again Phil you show your ethics as a good person.
    Watching this again with the new cut.
    Love bounce montage.
    Miss the lil blue truck soundclip.

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes, once I’d removed the sand, the difference was so much that I couldn’t leave the original video without mentioning it. So decided to do a quick re edit. (Well.. 2hrs or so isn’t all that quick lol)

  • @JohnRobinsonRC
    @JohnRobinsonRC 2 роки тому

    Impressed mate that you have made the decision to remove and apologise. Many channels would not so well done. Wishing you a lovely evening.

  • @michaeldorich4485
    @michaeldorich4485 2 роки тому +2

    Thanks for the your correction and honesty. We all make mistakes. If the tires still tend to wobble to some degree I would mention one thing to consider. I bought an Arrma Infraction Mega and the rear wheels wobbled a lot. When I move the rear tires to the front they did not. I found that the rear axles in the wheels were not straight. You could hardly tell by looking at them, but once they were changed it made a huge difference.

    • @TomleyRC
      @TomleyRC  2 роки тому +4

      Cheers Michael. When I tested it with once removing the sand, it was like a night & day difference. I was not happy to leave the original video up as it was not really fair

  • @alexjohnson2088
    @alexjohnson2088 2 роки тому +3

    Thank you Phil I reckon this could be our upgrades from the hbx16889

  • @zarccarsandothertoys.572
    @zarccarsandothertoys.572 2 роки тому +1

    Wow, one of the very few UA-camrs who cares about his viewers by actually reading their comments, this is what will make our community of RC enthusiasts flourish!!!

  • @cheseborger
    @cheseborger 2 роки тому +24

    Babe, wake up. Phil uploaded twice in one day.

  • @DoRC
    @DoRC 2 роки тому +2

    That's definitely why you always want to seal the wheels and vent the tires. Sand can't get stuck in them and get them unbalanced. Also stops water from getting stuck in and ruining the foams. Got a video on my channel that shows how to do it :-)

  • @richards-garage
    @richards-garage 2 роки тому +3

    Oooh, thanks for that. Gonna check my 1/8 truggy tyres for sand as they wobble all over the place. Great video. Looking for something for my little one, this could be the one

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes, big thanks to the comment section for pointing out my mistake!

  • @Pellum151
    @Pellum151 2 роки тому +1

    some great footage here ...love the beach stuff. Great reviews man ..thanks

  • @pascalhemerik448
    @pascalhemerik448 2 роки тому +1

    It makes you a better man admitting when you’re wrong. My compliments to you💪🏻👊🏻

  • @radiocontrolcardevelopment7329
    @radiocontrolcardevelopment7329 2 роки тому +3

    Djeezes those wltoys cars are getting seriously good

  • @wltoysxtreme
    @wltoysxtreme Рік тому +1

    The old thinner CVD joints in the 124019 yes they where thinner but much much higher quality, I run a 540 absima 8.5t with 3s (80mph) and never yet broke a standard CVD

  • @alvaroloyola3342
    @alvaroloyola3342 2 роки тому

    hello, I just want to say thank you for your videos, and today the hyper go 16209 arrived.... it's a little beast!!!! (I got hooked on her in your video) just thank you!!! keep doing what you do cause you do it so nice. 👍

  • @jameswisecarver
    @jameswisecarver 2 роки тому

    Oh uh 1612 here in Arkansas USA!! Afternoon Tomley! Thanks for the vid e o!

  • @RC-Expats-HK
    @RC-Expats-HK 2 роки тому

    Hey mate .. this updated vid is more fair on this little rc .👍🏼
    I had trouble initially on mine first few minutes. After that it opened up and drove fine !
    Still keep up the good work Phil 👍🏼👍🏼

  • @trasher2848
    @trasher2848 2 роки тому

    Really cool shots on the beach!

  • @just.jose.youtube
    @just.jose.youtube 2 роки тому +6

    This is the way the go. Respect. 🙂

  • @mikebird8290
    @mikebird8290 2 роки тому +3

    HI PHIL SIR THIS IS WHY WE ♥️ YOU'RE CHANEL. THANKYOU FOR POSTING A TRULY HONEST VIDEO SIR.🇬🇧🕊️👍🏼

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Thanks Mike. I like to give fair reviews for not just the viewers, but the manufacturers as well 👍

    • @mikebird8290
      @mikebird8290 2 роки тому

      @@TomleyRC GREAT MAN, I SALUTE YOU SIR 🇬🇧🕊️✌🏼

  • @steves06tc
    @steves06tc 2 роки тому +1

    Double upload is always nice even if it’s kinda the same video 😝 great to see you figured it out.your absolutely correct about the diffs and it’s actually common with a lot of cheaper rc’s where theirs either no diff fluid,mold defect,and some just cranked down too tight.

    • @Rcjamaica876
      @Rcjamaica876 2 роки тому

      Ok so when I purchase all I hve to do is take apart and check diff right??

  • @KPtain_RC
    @KPtain_RC 2 роки тому

    A very interesting car. Above all, I am very jealous of this great beach, which makes this work even more fun! 👍 Awesome and funny video, thanks! 😃

  • @snyperal
    @snyperal 2 роки тому +3

    Everyday is a school day. Quite impressive then, apart from the diff issue 👏 👍

    • @TomleyRC
      @TomleyRC  2 роки тому +3

      Yes, made a big difference!

  • @fishnrc294
    @fishnrc294 2 роки тому +1

    Your a good man for admitting being wrong. Made a huge difference after. It’s funny because I’ve had expensive RC’s where right from the start had loose pinions,no shock oil, loose wheel nuts,drive shaft pins fall right out etc. etc. So it’s even more aggravating when you pay so much & have to wrench on it & like you said how many people have the time or skill to wrench on it. A good example is my Losi Lasernut I absolutely love it but it breaks or shall I say falls apart all the time & I keep having to buy parts. It’s been down & just got a new pinion & gear because the pinion came loose for the lost count time & ruined both the pinion & the gear was bent. I also got a set of center dog bones because the pins on the end keep falling out. It’s becoming a money pit. But hopefully after these new parts it’ll be up & running. I’m pretty gentle with mine I see people bashing them & I’m like ok did I just get a bad one because mine would fall apart. Oh ya & the rear rod ends keep breaking 🤨

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Yes, I get a lot of comments saying this is ‘cheap junk’ etc… when I have also had expensive stuff that has issues straight out the box. That’s why it’s important to have a little hand on experience with this stuff

    • @legomotorsytmk230
      @legomotorsytmk230 2 роки тому

      lemme guess it was a losi dbxle 2.0

  • @FarmerFpv
    @FarmerFpv 2 роки тому

    You naughty boy, you, lol. Excellent video, Phil.

  • @arcaderacer586
    @arcaderacer586 2 роки тому +3

    RC Expats Hong Kong did a review a
    Couple days ago and also said it didnt steer very well and also broke the cvd. I dont know about this one. I want to love it but im torn LOL. We have the brushed version and absolutely love it. My daughter named it Dr. Danger LOL

    • @MangoJim90
      @MangoJim90 2 роки тому +1

      👍🤭🥳🙌

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Yes, the brushed is really good. Might be worth waiting to see if the update it with stronger CVDs and sort the diffs

  • @richards-garage
    @richards-garage 2 роки тому +3

    You made it much better doing the work on those diffs

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes, huge difference!

  • @DustyFingersRC
    @DustyFingersRC 2 роки тому

    I see this as further confirmation of your honest reviews ;)

  • @MangoJim90
    @MangoJim90 2 роки тому +3

    😍🥰👍👍👍 wow, Phil!!!!!) Lightning faith calibration 😀🤭🤫👍

  • @BangForYourBuckRc
    @BangForYourBuckRc 2 роки тому

    That’s probably what was causing your runtime to be only 6 min too! Good job figuring this one out Phil!👍🏻👊🏼😃

  • @lawrencewinter
    @lawrencewinter 2 роки тому

    always respect a man who's ready to call himself out. Great vid chap, looks fun. You reckon this one or the 144010 as a basher?

  • @nealstarling5422
    @nealstarling5422 2 роки тому +1

    Very well done ! Thanks
    does any rc car have perfectly balanced wheels/tires…nope. Very rare if they do.

  • @brucebaker0316
    @brucebaker0316 Місяць тому

    Good video Fella!! 🤟 debating on it

  • @TheFortWall
    @TheFortWall 2 роки тому +2

    I got one of the brushed ones. Less than 7 days of owning it and the rear diff sounds like its eating itself.
    I only used it on grass and bought it because of a few tubers saying its a good starter car so I was pretty pissed. Supplier is saying they are replacing it but I have been waiting for a replacement now for longer than I owned the bloody thing. Including the time it took to ship to me originally. it simply shouldn't have happened to start with so WLToys haven't got a great name in my books atm.

  • @PhilipBallGarry
    @PhilipBallGarry 2 роки тому

    Thanks for the updated vid Phil 👍. I'll bet the battery life is considerably extended now you've sorted out those diffs too? The ESC and motor must have been working overtime overcoming all that additional friction.

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes, I expect it will be better. I'm so glad it was just the diffs :)

  • @andreRC88
    @andreRC88 2 роки тому +1

    Better to see 2 times ,is no much really to see on UA-cam been boring lately just waiting for new videos,but yes not perfect wltoys but little work makes little smile on your face.i not got any bad to say to my wltoys,got my 12423 for 4 years and still all stock electronic,and is working fine happy days

    • @TomleyRC
      @TomleyRC  2 роки тому

      It has certainly been a bit quiet recently. Hopefully it’ll pick back up

  • @viniciusbrito7512
    @viniciusbrito7512 2 роки тому

    U honest bastard! Thanks for the info and great vid, as usual! U rock, mate!

  • @MarcosBueno.
    @MarcosBueno. 2 роки тому

    I do not quite understand the brico that you have made to correct the deviation in line of the differentials. Add a washer or remove a washer to prevent sprockets from skipping? Thanks for your videos.

  • @gbraadnl
    @gbraadnl 2 роки тому

    Honesty goes a long way

    • @gbraadnl
      @gbraadnl 2 роки тому +1

      I actually wondered: Beach first didn't seem like a good idea. Glad this partially got sorted

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes… it make sense that sand would have got in… but I’ve ran so many cars on that beach and never had this issue. At least I’ll remember for next time!

    • @gbraadnl
      @gbraadnl 2 роки тому

      @@TomleyRC While most of the wheels are glued the venting hole might be bigger. Without foam this can collect sand. My cars immediately showed signs of wear off ceased up on the steering because it collected sand around the servo (12428). Many things can contribute to this behavior. Nonetheless, great to see you come back to this so quickly!

  • @tobydyes
    @tobydyes 2 роки тому +1

    That's why you should tape the holes on the tires

  • @geroolea4676
    @geroolea4676 Рік тому +1

    Im thinking to buy a vorteks but i dont know if these one is better😅

  • @afrog2666
    @afrog2666 Рік тому

    Bounce montage deserved a like xD

  • @Pablo668
    @Pablo668 2 роки тому +1

    Good on you for admitting the mistake and changing your vid. To err is to be human.

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Yeah… when I removed the sand it was too much of a difference to ignore.

  • @EJ-74
    @EJ-74 2 роки тому

    I wouldn't say you messed up it shouldn't come like that. That's entirely there fault. imo Appreciate ya showing these things. Looked like it ripped pretty well once the issue was worked out. 👍🏻

  • @vitodambra72
    @vitodambra72 2 роки тому +2

    Phil can you post a link for those paddle tires? I want to get this model & add those tires i live across from beach, thanks mate 😉👍🏽💯

    • @TomleyRC
      @TomleyRC  2 роки тому

      Of course :) s.click.aliexpress.com/e/_DDvBUQJ

  • @andrealves1250
    @andrealves1250 Рік тому

    Hello keep up the good videos that have helped me and my people. Does this new wltoys 104019 have a control delay? Or in other words if there is a delay in the accelerator like for example the wltoys 124017 v2?

  • @mattster197
    @mattster197 2 роки тому

    "Its got more girth" Perfect that's what she said opportunity missed not once but twice!

  • @mikeupton5406
    @mikeupton5406 2 роки тому

    EVERYONE KNOWS your legit. Not at all surprised if something wasn't the best/accurate content it would be fixed.
    I was tired, just home from work. Do not recall anything out of line.
    A prop balancer for R/C planes and some home made adapters for various tires and rims. I would imagine there's a better way.
    The rims on this truck are good looking.

  • @rogueFactor
    @rogueFactor 2 роки тому

    i see you're gettin' a speed run in before getting a speed run in at the Fitness club. =oP

  • @lashed777
    @lashed777 2 роки тому

    Thanks for the updated video. A query unrelated to RC, what beach did you visit? I know I don’t live far from you and it looks really nice.

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Mablethorpe 👍

  • @BlueDually4x4
    @BlueDually4x4 2 роки тому

    Everyone makes mistakes, you corrected it and retested so no harm done.

  • @jdsrcs8061
    @jdsrcs8061 2 роки тому +2

    Where did you get those paddles!?!?!? Great update!!!

  • @jhaybz29
    @jhaybz29 2 роки тому

    Hey man~ can you make a simple bashing video of this with new wheels? I feel like this one actually has a lot more potential but with a few fix. This feels like a kit for the intermediate peeps who wants something cheap that they can ticker with

  • @modelnutty6503
    @modelnutty6503 2 роки тому

    fair enough, vents in rims can take in water dirt or sand pretty quick.

  • @Rek_Rc
    @Rek_Rc 2 роки тому

    If wltoys makes a 10th scale short course truck that runs like that, I'll be the first, and second, and third in line to buy one.

  • @spockfpv
    @spockfpv 2 роки тому

    Thanks so much. Much better!

  • @KathysFlog
    @KathysFlog 2 роки тому +1

    98.5k subs. Time for a comp to get to 100k!

    • @TomleyRC
      @TomleyRC  2 роки тому

      Nope.. I’m done with Comps. To much hassle 😎

  • @mikemangiameli561
    @mikemangiameli561 2 роки тому

    Looks like a nice rc

  • @RickOAA
    @RickOAA 2 роки тому +1

    The brushless Wltoys 1/12th and 1/14th cars will need the "metal upgrade" center shaft and at least the rear diff upgraded. The upgrade parts appear to have solid bronze gears vs the original sintered metal parts. Also, a set of LC Racing CVD's wouldn't not be a bad idea. The originals are spaghetti. They bend easily.

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes, a few of the LC Racing parts fit straight on 👌

  • @fredyt8318
    @fredyt8318 2 роки тому +1

    Good job 👏

  • @xplay751
    @xplay751 2 роки тому

    I converted a brushed version to brushless,I keep snapping the right cvd,I broke 3 of them so they need to get that sorted out

  • @muratogun1989
    @muratogun1989 9 місяців тому

    Hello, I just bought the wltoys 104018 model. Is there any part I need to lubricate? Should I do running-in for the battery? If I want to buy a second battery, what is the highest mah battery that is suitable?

  • @thegreattreon0177
    @thegreattreon0177 2 роки тому

    How did sand get into the wheels if they're supposed to be glued and sealed off?

  • @Bluecray
    @Bluecray 9 місяців тому +1

    Mine wont go well full throttle in a straight line, it swops ends rapidly!! It came with the front wheels toed out a bit
    What can I try please

  • @mikemangiameli561
    @mikemangiameli561 2 роки тому

    What thing do you use to hold stuff when you solder

  • @jaklamho
    @jaklamho 2 роки тому

    Is there any CVD upgrade for the 104019? It breaks...

  • @МихаилФадеев-я3е
    @МихаилФадеев-я3е 2 роки тому

    Tell me, does this model have a delay when you press the gas?

  • @saddharmaya3038
    @saddharmaya3038 Рік тому

    you should review the 104016

  • @rccarsandmusic2641
    @rccarsandmusic2641 2 роки тому

    There is a great chassis brace available on Aliexpress for this a the whole series 124002a-10

  • @Rcjamaica876
    @Rcjamaica876 2 роки тому

    What excatly did you do to the diff please??

  • @tobydyes
    @tobydyes 2 роки тому +2

    By that lamp post look like you was on two wheels

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yeah… so so close!

  • @muhammadrifqi8024
    @muhammadrifqi8024 2 роки тому

    can you review the rc zd racing mx 07?

  • @LucasLee-sl3xm
    @LucasLee-sl3xm Рік тому

    Hi guys sorry for the late comment 😅 but can anyone tell me how do you loosen up the diffs? Kinda new to this. Anything helps!

  • @RaiuAdami
    @RaiuAdami 2 роки тому

    Question, could you make a video comparing Adventure Force RCs to WLToys RCs? It'd be really interesting to see just how bad Adventure Force's copying of hobby grade designs are in comparison to something that has much more substance to it

  • @antonioholley568
    @antonioholley568 Рік тому

    What size 3s did you use

  • @Darkside09423
    @Darkside09423 Рік тому

    Can crystal and controller be change

  • @tobydyes
    @tobydyes 2 роки тому +2

    Battery don't last long cuz it's brushless taking a lot power

  • @mehimrc1314
    @mehimrc1314 2 роки тому

    Did you get a strongly worded email from wltoys saying "please help us out here Phil" only joking, nice honest re-review 👍

    • @TomleyRC
      @TomleyRC  2 роки тому

      Haha.. well considering I released the original video at 13:00 today, and within the first 2hrs a few comments suggested Sand in the tyres. So at about 15:00 I removed the sand, charged a battery, grabbed my GoPro… shot some footage, re-edited the original video and uploaded it. WLToys are probably still asleep 😅

  • @idjc2621
    @idjc2621 2 роки тому

    3660 is the same size as Arrma 3s line. Lots of Power for the SIZE

  • @traxxasfans
    @traxxasfans 2 роки тому

    A great place two take a cheap basher the beach .

  • @AshishAmatya
    @AshishAmatya 2 роки тому

    so in summary u don't recommend this rc to do well right out of the box ?

  • @owen8538
    @owen8538 Рік тому

    Can it safely run 3s out of box

  • @ManuelOrtizification
    @ManuelOrtizification 2 роки тому

    Honestly never expect much from RTR wheels my self, most RCs might as well come without wheels as far as im concerned 🤣
    Those diffs and CVDs that sheer off is way more off putting. 😅

  • @mossyhollow3732
    @mossyhollow3732 2 роки тому

    Guess I’ll check my wheels for sand now.

  • @shahkelewek9582
    @shahkelewek9582 2 роки тому

    I hope wltoys see this video n make improvment.

  • @acche-rc
    @acche-rc 2 роки тому

    Is this better or the bezgar hm101?

  • @amcgrath5918
    @amcgrath5918 2 роки тому +4

    "dont wanna be pulling things apart" oh god no - noone wants to do that! *glances sideways*

  • @mikemangiameli561
    @mikemangiameli561 2 роки тому

    I'm taking a break from Rcs I'm afraid to have any other Rcs die on me lol . Had a bad 😞 week with RCS motor died two servo and two escs died so I'm down to just one running. Yeppie Mr hand was back.

  • @Moggmodels23
    @Moggmodels23 2 роки тому

    Very nice video mate you should not go on sand it mess it all not

  • @tobydyes
    @tobydyes 2 роки тому

    I also got to remember it's a low quality battery it might not be right on a capacity

  • @rccarsandmusic2641
    @rccarsandmusic2641 2 роки тому

    The diffs are the same as the 104001's.

  • @dt4807
    @dt4807 2 роки тому

    We forgive you, don’t let it happen again! 😏😁

  • @manchildrc
    @manchildrc 2 роки тому

    #respect

  • @rudrasinhvaghela5794
    @rudrasinhvaghela5794 2 роки тому

    Try the new 1/18 scale Traxxas trx4

  • @donniemarks94
    @donniemarks94 2 роки тому

    Very nice little budget truck also me likey bouncey 😆

  • @KathysFlog
    @KathysFlog 2 роки тому

    S E C O N D