Watching the solder balls move jnto place on that attachment was really awesome to watch! Great stuff my friend. Your videos are informative and just a pleasure to watch. Take care.
@@TheCod3r Exactly. And the Teflon coating...well, that does nothing. Now, if I could find a way to keep solder balls from having static charges that make them jump all over the goddamn place.
Man. I have a V1 switch with a bad sd card connector on the motherboard. It's been modded and thought it was going to sit on my shelf forever. I got a few connectors for it, but didn't want to attept repair without knowing the right way to do it. I can't tell you how much watching you video is going to help. Will attempt to do it this week and hopefully get this back up and running!
Probably a stupid question, but when you replaced the solder on the chip with leaded the solder pads looked OK, as in nice and seperate solder on each pad. Could you get away with just putting chip on without using balls?
Not really a stupid question 😁 you can on some chips, like really small ones such as the MAX17050 fuel guage because the pads are easier to make contact with but with bigger chips like the MAX IC while it's technically possible you'd still need to get the pads the exact size. There's a guy on youtube (I forget his name lol) who can do it on any chip with just a soldering iron which is pretty cool
Hey Thecod3r. Quick question: how does the video chip in the Nintendo switch Short circuit or breaks as easily? I seen so many switch repairs on your UA-cam channel and others and it seems to be common. Is there a way to prevent the video chip to burn out besides using Nintendo licensed ac adapter and Nintendo licensed dock
Great Job. Do you know by chance the microswitch used in the Xbox one s for turning it on and off? I accidentally ripped it off the last time I wanted to refresh the thermal paste.
Nice job mate....so enjoy your videos please keep them coming and here to help get your videos out to everyone....lol fixing someone else's fix lol .....nice job
Reballing must be incredibly nerve wracking. I know how to do it (even though I don't have the tools or workplace necessary), but I don't think I could ever do it. I don't have the kind of patience necessary. Side note: wow that Switch is filthy. I always keep mine clean (granted I don't use the touch screen much, and I keep it docked most of the time, but still).
I took it apart and found it had a dust bunny in the socket so jammed jellied tight I no there the pole to the connector side could not get 9n the hole all the way and didn't allow fill contact with the pins shined a light in there an can see the jammed dust 9n the commector
havent watched yet but reading the headline, usually just replacing the sd card mod fixes the issue, very unlikely it is anything worse than that as its hard to bridge those pins unless they had it open and was unplugging it and replugging it in whilst on , looking forward to see whats up with it as i watch :D
Nice repair, I’ve seen a few switches being sold because their sd card slots don’t work and on the surface it seems like they just need a new sd card slot but in reality they could need the chip replaced which isn’t so easy lol. Btw I tried to sub on twitch using my prime but it looks like I must have used it already on someone else, can’t remember who I don’t use twitch.
Yeah some can be easy, others are tricky to figure out but generally if the connector is OK and the module is OK the chip is bad. Thanks for trying to sub on twitch, not a major issue though mate, I appreciate the gesture:)
@@TheCod3r I’ll remember that but to be honest now I’ve got a switch Im not a huge fan so I don’t think I’ll be buying anymore to refurbish. Im more into proper consoles fixing and modding them. No worries mate if I can figure out twitch you’ll see my sub 😃
hey bud l got a good deal on 3 Xbox 360's all have the RROD but if l can not get them working l can use for practice i.e. taking HDMI connectors off chips and all the other goo stuff all for £25
To be honest I do sometimes do some odd jobs for free if it's part of another job, like if a joycon rail wasn't working I'd replace it at cost but if it was a bigger issue I'd just requote the customer
I don't use Instagram for business mate. I'd need you to get in touch using the website so it goes to my inbox. Instagram is just for UA-cam stuff but I barely use it
![[FATAL ERROR]: Switch Doesn't Read SD Cards | Can I FIX It?](http://i.ytimg.com/vi/ON_UOAkQl00/mqdefault.jpg)
First
Haha nice you legend
u sob! lol
Cheater
Nice! Love that little brass attachment thingy!
It's awesome mate, worth every penny 😁
Watching that attachment flow the solder balls was cool as hell.
Indeed, that thing really is amazing
Watching the solder balls move jnto place on that attachment was really awesome to watch! Great stuff my friend. Your videos are informative and just a pleasure to watch. Take care.
Very nice fix and video again, oh and the lighting on the scopeview is much better m8. Keep up these great repairs 👍
Thanks mate much appreciated
I've been using a small (3") frying pan to reball for quite some time. Works a peach. Hold the pan, hot air from underneath...flow flow bro.
I'd assume it has pretty sweet thermal conductivity since it would be made of aluminium 😁
@@TheCod3r Exactly. And the Teflon coating...well, that does nothing.
Now, if I could find a way to keep solder balls from having static charges that make them jump all over the goddamn place.
oh man that reballing was soothing to watch
Man. I have a V1 switch with a bad sd card connector on the motherboard. It's been modded and thought it was going to sit on my shelf forever. I got a few connectors for it, but didn't want to attept repair without knowing the right way to do it. I can't tell you how much watching you video is going to help. Will attempt to do it this week and hopefully get this back up and running!
That's awesome man. Glad this video will help you out. The connectors are fairly easy to replace if you heat up from underneath 😁
Bro, hand reball is crazy haha I always use atleast an iPhone stencil and solder paste.
Haha yep I must be out of my mind 😅
Amazing work 💯👍🏾
loved the video and its refreshing to see something that is not a usb c port, m92, bq or video chip, specially m92 and usb c port are too common
Cheers mate, I agree it's nice to get something different. I'm working on another different one today too :)
great job nicely done 👊
Awesome vid phill an good explanation on the max ic
Cheers bud 👍
Probably a stupid question, but when you replaced the solder on the chip with leaded the solder pads looked OK, as in nice and seperate solder on each pad. Could you get away with just putting chip on without using balls?
Not really a stupid question 😁 you can on some chips, like really small ones such as the MAX17050 fuel guage because the pads are easier to make contact with but with bigger chips like the MAX IC while it's technically possible you'd still need to get the pads the exact size. There's a guy on youtube (I forget his name lol) who can do it on any chip with just a soldering iron which is pretty cool
@@TheCod3r I'd love to see that because I tried reballing a tristar with just an iron for shits and it did NOT go well.
Hi... I'm from Indonesia
I always watch your videos and I really like them.... I really want to be like you
Good call on that brass tool, I bought one of each as I do enjoy useful tools :D
Yeah they're really really good mate. Can't go wrong with them for smaller chips. I did check they do up to a ps4 sourhbridge too 😃
Well done ... very neatly
Btw, you didn't add the link to that solder iron attachment you used :D
Yeah it's there mate just refresh the video 😁
@@TheCod3r Nice :D
great video master
Once again phil ..great fix and great video
Thanks buddy
Great work.
The bubbling flux on the IC you reballed made it look like an absolute DISASTER. Then when it boiled away perfection.
This sd card slot was made to give trouble. In the new Switch Oled they changed that and it got much better.
Yeah it definitely gets better in the new model (and in the switch lite too)
Great Job Phil, nice Soldering and analyzing the Mistake to the Point. Sucscribe is on. Take care man greets from Germany
Hey Thecod3r. Quick question: how does the video chip in the Nintendo switch Short circuit or breaks as easily? I seen so many switch repairs on your UA-cam channel and others and it seems to be common. Is there a way to prevent the video chip to burn out besides using Nintendo licensed ac adapter and Nintendo licensed dock
i need your help, i took my switch back off to clean it and replace the thermal paste and now my sd card does not work can you advise me please?
Thank you Chad, can i call you Chad ?
I like your competence.
Haha call me anything you want, just don't call me late for supper 😝
Great Job. Do you know by chance the microswitch used in the Xbox one s for turning it on and off? I accidentally ripped it off the last time I wanted to refresh the thermal paste.
Sadly not mate I've only ever used donor bosrds to fix them. Sorry
Love this video
Nice job mate....so enjoy your videos please keep them coming and here to help get your videos out to everyone....lol fixing someone else's fix lol .....nice job
Cheers buddy much appreciated. Glad you're enjoying the content 😊
n1 m8 new multimeter?
Yeah mate my other one died lol
Reballing must be incredibly nerve wracking. I know how to do it (even though I don't have the tools or workplace necessary), but I don't think I could ever do it. I don't have the kind of patience necessary. Side note: wow that Switch is filthy. I always keep mine clean (granted I don't use the touch screen much, and I keep it docked most of the time, but still).
Can that tool also be used for ps4 southbridges?
Yeah I'd say so. I did try it on a southbordge, it hangs over the tool slightly but it did melt the solder
Nice fix Phil. Do you have another multimeter is other defect?
Greetings
My old Android has a socket that does the same thing
I took it apart and found it had a dust bunny in the socket so jammed jellied tight I no there the pole to the connector side could not get 9n the hole all the way and didn't allow fill contact with the pins shined a light in there an can see the jammed dust 9n the commector
havent watched yet but reading the headline, usually just replacing the sd card mod fixes the issue, very unlikely it is anything worse than that as its hard to bridge those pins unless they had it open and was unplugging it and replugging it in whilst on , looking forward to see whats up with it as i watch :D
Nice repair, I’ve seen a few switches being sold because their sd card slots don’t work and on the surface it seems like they just need a new sd card slot but in reality they could need the chip replaced which isn’t so easy lol. Btw I tried to sub on twitch using my prime but it looks like I must have used it already on someone else, can’t remember who I don’t use twitch.
Yeah some can be easy, others are tricky to figure out but generally if the connector is OK and the module is OK the chip is bad. Thanks for trying to sub on twitch, not a major issue though mate, I appreciate the gesture:)
@@TheCod3r I’ll remember that but to be honest now I’ve got a switch Im not a huge fan so I don’t think I’ll be buying anymore to refurbish. Im more into proper consoles fixing and modding them. No worries mate if I can figure out twitch you’ll see my sub 😃
@@Alexander_l322 to be honest I'm not keen on them, they're cheaply made, unreliable and super easy to damage. Thanks mate I appreciate the support
@@TheCod3r I agree mate and no worries 😄
hey bud l got a good deal on 3 Xbox 360's all have the RROD but if l can not get them working l can use for practice i.e. taking HDMI connectors off chips and all the other goo stuff all for £25
Hello
Where yow from
Dudlay ay I 😝
Can you answer a question for me?
Man are you sniffing glue?
Solder fumes?.
Must be to do jobs like this lol
@@TheCod3r ha ha ha.
@@TheCod3r Its good to have a sense of humour and to not take one so seriously. Enjoy your day.
New last!!
Want a cheap fix? Send it saying "It's only the sdcard not working".
To be honest I do sometimes do some odd jobs for free if it's part of another job, like if a joycon rail wasn't working I'd replace it at cost but if it was a bigger issue I'd just requote the customer
big dowg
Wow that switch looks nasty.
No I’m last LOL
Isn’t it a nice game? ;)
Last?
Second :)
Get some sleep bud
I definitely looked a little burned out in this one lol
Sent you an Instagram DM and an email about my PS4 slim having BLOD issues. If you could reply that would be great, am after a repair quote, cheers
I don't use Instagram for business mate. I'd need you to get in touch using the website so it goes to my inbox. Instagram is just for UA-cam stuff but I barely use it