YD25 Timing Chain Tools D40 D22 R51

Поділитися
Вставка
  • Опубліковано 22 жов 2024

КОМЕНТАРІ • 42

  • @ALFAMUSIC2
    @ALFAMUSIC2 5 місяців тому

    Help needed, so i took out my upper and lower timing cover to redo the timing chains, because the car was starting but not revving at allx. Discovered that the crank sproket was missing some teeth and thag there was a hole on that bearing(round) part of the oil pump was broken, is this part replaceable or do i need a new oil pump

  • @renujadias9852
    @renujadias9852 Місяць тому

    Hi In my YD25 engine the key of the crankshaft pulley fall into the engine,will it do any injury to my engine

    • @yd2532
      @yd2532  Місяць тому

      @@renujadias9852 try to get it out with a magnet

  • @troymckibbin528
    @troymckibbin528 8 місяців тому +1

    Can the crank locking bar be purchased separately?

    • @yd2532
      @yd2532  8 місяців тому

      Yes cost about $80. Can be used on alot of diffrent cars with similar pulleys

    • @troymckibbin528
      @troymckibbin528 8 місяців тому

      @@yd2532 Would it be best to call you to order?

    • @yd2532
      @yd2532  8 місяців тому

      @@troymckibbin528 ye call or email me

  • @devarmont87
    @devarmont87 8 місяців тому +1

    Good stuff

  • @dickydk01
    @dickydk01 8 місяців тому

    Good job sir, thanks sharing

  • @ALFAMUSIC2
    @ALFAMUSIC2 7 місяців тому

    Sorry to trouble you man, i have a question, if you remove the top chain of a yd25 without marking its position, do you have to redo both timing chains

    • @yd2532
      @yd2532  7 місяців тому

      Don't have to mark the top chain. If that's all you have taken off you can just realign it with the painted marks on the chain and sprockets.

    • @ALFAMUSIC2
      @ALFAMUSIC2 7 місяців тому

      @@yd2532 thanks man you are a life saver, oh one last thing, what happens if a cylinder head is not torqued correctly

    • @yd2532
      @yd2532  7 місяців тому

      @@ALFAMUSIC2 gasket might not seal Properly

    • @ALFAMUSIC2
      @ALFAMUSIC2 7 місяців тому

      @@yd2532 as I put water in my radiator it comes out of my oil sump what causes that

  • @admiralgoodboy
    @admiralgoodboy 7 місяців тому

    Hey man you ever need to set up an oil catch can for the yd25?

    • @yd2532
      @yd2532  7 місяців тому +1

      We don't run catch cans. You don't need them if you blank the EGR

    • @admiralgoodboy
      @admiralgoodboy 7 місяців тому

      @@yd2532 oh yeah. For legal reasons i can't blank the egr on my d40 so I'm asking around looking for advice. I get a fair amount of oil blowby from my engine

    • @yd2532
      @yd2532  7 місяців тому +1

      @@admiralgoodboy if you have oil around the intercooler hoses that's normal. Even when people put catch cans on they still have that because oil can come from the turbo

  • @ALFAMUSIC2
    @ALFAMUSIC2 8 місяців тому

    Can I ask what can cause a d22 to only run only while spraying starting fluid, however when you stop spraying the car dies emediately

    • @yd2532
      @yd2532  8 місяців тому

      Sounds like it's not getting fuel but has some compression. What year model?

    • @ALFAMUSIC2
      @ALFAMUSIC2 8 місяців тому

      @@yd2532 2010

    • @ALFAMUSIC2
      @ALFAMUSIC2 8 місяців тому

      And I checked the injectors do spray, can I send you a link to the video?

    • @ALFAMUSIC2
      @ALFAMUSIC2 8 місяців тому

      Oh and even though the car doesn't start I keep getting water in my oil

    • @ALFAMUSIC2
      @ALFAMUSIC2 8 місяців тому

      ua-cam.com/users/shortshh_r3Ze9huc?si=IIXyyC7xXPLKDzAX

  • @devonfranco5644
    @devonfranco5644 7 місяців тому

    Where can I get these tools to buy

    • @yd2532
      @yd2532  7 місяців тому

      Yd25.com.au we only sell them in Australia

  • @1boyblu
    @1boyblu 8 місяців тому +1

    Link to buy tools please

    • @yd2532
      @yd2532  8 місяців тому

      to order you can call or email us. We can only freight them within Australia

  • @jennahmansour8285
    @jennahmansour8285 5 місяців тому

    Despite changing the timing chain, water pump, deactivating the EGR, and isolating the issue, my Nissan Pathfinder still emits black smoke during simple acceleration. The injectors have been verified, and there’s a slight oil seepage from the turbo. Where could the problem be originating from?”

    • @yd2532
      @yd2532  5 місяців тому

      Try an ecu rest. Does the car feel underpowered?

    • @jennahmansour8285
      @jennahmansour8285 5 місяців тому

      @@yd2532 Thank you for your advice! The engine is responsive and accelerates quickly. I’ll definitely try the ECU reset as you suggested. You’re the only one who responded among all the others, and I truly appreciate it.

  • @admiralgoodboy
    @admiralgoodboy 8 місяців тому +1

    Damn son, you kinda cute

  • @nickbest573
    @nickbest573 6 місяців тому

    Ive noticed on my yd25 the harmonic balance looks like it goes back an forth. Noticeable.
    Also
    I have a weird noise at idle but goes away as soon as rev it.