11th Gen 2022+ Honda Civic Si REDTIGER F7N Front & Rear Dash Cam with Hardwire Kit Install
Вставка
- Опубліковано 22 сер 2024
- In this video, I show how to install a REDTIGER F7N dash camera system in an 11th generation Honda Civic, complete with hardwire kit.
Update: The video footage of the fuses show my yellow wire in fuse 9, this was incorrect, I corrected this to fuse 10, but didn’t show that in the video. You will plug the yellow wire into fuse #10 (door locks) for constant power and the red wire will plug into fuse #13 (wiper) for accessory.
For more information about the vehicle used in this video, please check out the owner's other social media links: linktr.ee/icem...
If you’re interested any of the carbon fiber interior pieces shown, they were purchased from Synth Carbon.
www.synthcarbo...
Iceman has a 10% off coupon code “iceman”
Links to Dash Cam Products
REDTIGER F7N 4K Dash Cam with Screen- amzn.to/48ojvtb
REDTIGER F7N Dash Cam Hardwire Kit - amzn.to/3tTE4yq
REDTIGER F9 4K Mini Dash Cam no Screen - amzn.to/48qha0J
REDTIGER Hardwire Kit for F9 - amzn.to/3NVlBbA
General Tools
Blue Painter's Tape (Sharp Lines) - amzn.to/3kimL4X
3M Scotch Super 33+ Electrical Tape - amzn.to/48nwqeF
Tesa Tape - amzn.to/3Po9d5D
Trim Removal Tool Set - amzn.to/3k9pG00
Fiberglass Wire Fish Line - amzn.to/46xSWBp
Craftsman Tool Set - amzn.to/3ixW4sD
Craftsman Screwdriver Set - amzn.to/3CGJf69
Ratcheting Screwdriver - amzn.to/3qmjt3J
Long Nose Pliers - amzn.to/3VWZ67j
Long Nose Pliers - amzn.to/3IOq0L7
Flexible Ratcheting Wrenches - amzn.to/3C4FZRg
Ratcheting Wrench Set - amzn.to/3OUibHk
Cordless Ratchet Wrench w/Extended Head - amzn.to/3otVLSQ
Cordless Ratchet Wrench - amzn.to/3WEnP2c
Tools for Wheels
RYOBI ONE+ 18V Cordless 1/2 in. Impact Wrench - amzn.to/3S8pmgl
1/2" Wheel Socket Set - 15/17/19/21/22mm - amzn.to/3on5rOS
1/2-inch Torque Wrench 10-150 ft./lb. - amzn.to/3WqcW44
Low-Profile Jack 1.5 Ton (3,000 lbs.) - amzn.to/3WoBWZs
For any vinyl products used in this video, please contact Grape Ape Ink Decals at grapeapeink@yahoo.com or you can visit our shop on Etsy Grape Ape Ink Decals at www.etsy.com/s.... My wife and I own this shop.
Disclaimer:
This Channel is a participant in the Amazon Services LLC Associates Program. An affiliate advertising program is designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Feel free to comment or email me at nprform@gmail.com
Please like, share, and subscribe for more content! Thank you
#honda #civic #typer #si #redtiger #f7n #f9 #dashcam #hondacivic #civicsi
you mean you had it in 9? 9 is fr acc socket (front accessory socket/ front usb port?) did you later change it to 10 because the diagram says 10 is door lock 20a, door lock 20 amps which would work perfect for a dash cam since its constant power.
@@jacksonjust3854 You are correct, I used fuse #10 (door locks) for constant power to the yellow wire. I switched it and forgot to update that in the video.
Shop wanted $150 for this, did it myself today because of your video. Thanks a ton!
No problem, I’m glad it helped. :)
shops might be professional but, considering a professional would have this installed under like 20 mins, 400$+/hr labor cost is like actually a robbery
Thank you for sharing your installation. I was searching vid on how to install rear or how to run cable. I was thinking to run it in the cealing but you made alot easy.. Ty
You’re welcome. I’m glad the video will help make your job easier.
trying to do this in a 2024 Integra. Closest car to it, worried about doing anything wrong but you made it seem easy so I'll probably try to do it this weekend.
Feel free to ask questions. These dash cams are pretty easy across most cars.
easier to run the rear camera wire along the top near roof instead of down near floor and then back up
That’s definitely an option. I did that with my Elantra.
Hi I’m tried on my 23 civic sport but it’s not working for me
What is not working? Is it not coming on?
@@nprform Hi, thank you for sharing the information. I’m stuck, I have 2023 sports civic and I have used 39 (R Side Door lock)for constant power, and 21 ( Cargo ACC socket)for ACC. But, it didn’t work out. Camera isn’t turning on. Any suggestion.?
@@Fu4fee First, make sure your ground wire is touching solid bare metal, Second, if you are going to enable parking mode, make sure the red wire is plugged into a fuse going to something that doesn’t have power, when the car is off (ACC Wire ), Third, make sure the yellow wire is plugged into a fuse that has power all the time, like the front door locks (Constant Wire), Fourth, if you don’t want the camera to use parking mode, you can install both wires into fuses that don’t have constant power, this will only send power to the camera, when the car is on. In my video, I have the camera hooked up to be able to use parking mode. This is what the owner wanted.
so if i replace the fuses with the wire does that mean whatever original function it had will stop working? also how do you know which is 10 and 13?
No, it will function as normal. I’ll double check 10 and 13 for you tonight.
There are numbers at the top and bottom of each row of fuses. You count up or down from the number on the fuse box. For example: the second row begins with “8”, so you just count down two fuses to find #10.
Almost forgot on the pillar did you run the wire under the air bag?
No, just run the wire to the side of the airbag and behind the rubber door seal.
Hello. I also have a 22 Si. When installing the hardwire kit into the same fuse spots as you did in the video, for the parking mode, does it or can it in any way drain the battery at all with the parking mode on all the time? I just worry that it does and that i can come back to my car with a drained battery. So I'm wondering if the fuse taps are or should be necessary to use with the second fuse in, in order so that that does not happen? Thank You in advance.
The hardwire kit has a built-in low voltage safety features that cuts off power when the voltage drops below 11.8V.
Every dashcam comes with groumd wire, yellow and red wire?
Not all wire kits come with a yellow wire. I have a kit on my Elantra that doesn’t have the yellow wire. I would suggest a kit with the yellow wire if you want to use the parking mode “always on” feature.
I just orerdered the F7N dash cam. Im wondering, where you do you hide the extra slack from the rear camera?
When i want to customize Parking mode it will not allow me to. Says “install acc hardwiring kit” what to do?
Did you install the hardwire kit or are you using the 12volt plug-in that came with the dash cam?
@@nprform i hardwired it as shown in the video. After starting and letting the camera shut off several times, i was able to use parking mode. Thanks for the video as it was very helpful. I had the hardwired kit since 2023 but didn’t have time to install before today. It bit me in the ass bc someone messed up my bumper and fender not long ago.
@@notomar1555 I’m sorry to hear about the damage to your car. I’ve found a dash cam can really save you in an accident. I’m glad to video helped and you got the parking mode working. If you need anything else, please let me know.
Hey I’m installing the f9 version which is just without the screen . The hardwire kit is a little different and had to used the adapter for my fuse box. I have a 24’ si and when I plugged it into the same fuses as you it is always on, even when the car is off. Any idea please?
What is fuse 10 and 13 used for on your car?
@@nprform I figured it out I think. The one you linked for the f9 in the description is for 24 hour recording. I’m returning it and getting the other one for the f9 compatible. I was confused because it looks completely differnt to the one you had in the video but the new one being ordered is the same as yours
@@danielbroadstock4583 ok good, I’m glad you figured it out. I will double check my links. Thank you!
@@danielbroadstock4583 can you post a link to the one you just ordered?
Hey, a bit confused. You said yellow wire goes to fuse 10 but i saw that you put it on fuse 9 not 10. Correct me if im wrong. Im just a bit confused. Thanks
And follow up question. What will happen to the fuse that you removed on the wire 10 & 13? Just want to make sure that it will not going to affect the system of my car before i install the hardwire. Btw i have 2023 civic sport touring. Hopefully you can respose if you see my comment. Thanks
I had tired a couple of fuses to make sure the camera worked correctly. Make sure the yellow and red wire go into the two fuses I reference in the video.
@@geraldperalta6981 Nothing will happen to them. Just keep the fuses in case you remove the camera.
@@nprform thanks for idea boss. I just wired my dash cam. But what i did is i put it one on ACC #45 and the other is on Door lock #10.
Get a fitcamx instead, its looks like you dont even have a dashcam