That's the EXACT problem I had on my PS3 Super Slim, the connection must have gotten loose over time. Thank you so much for showing this issue on camera, otherwise I probably would have never opened my PS3 and tried it myself 🙏
Look all things on mine is working except the laser is does i little one two 3 thingy then stops doesn’t even try and spin the disc I feel either the laser be broke it’s scratched or the connection is cut
the outer screws are just a small philips head. but the inside holding down the CD Drive is a special Torx T8 Security screw, i had the same problem but instead of waiting to buy one, i just grinded it down and used a flathead driver. hope this helps and im not too late lol 😁
0:46 how did you take that first top part off?! I have been strugling for an hour and still can't. Also my ps3 doesn't have any screw on the bottom , does this change anything?
Okay so 15 hours late but first you need to unscrew one of the security screw crews to take the first top part of, you can find the screws when you take off the right side panel by sliding it to the power button and when you do remove the top part make sure to be gentle since you can accidentally break the hooks that holds the top part. For the bottom screws take off the kind of stubs and you'll find them there and one of them is behind a label. That's all and good luck
@@alostredditor3102 lol I have already broken one hook and the part that holds the security screws, I didn't realise they were connected and I went hard on it. But I can still secure the top part even without it.
@@alostredditor3102 I did everything on this vid and the cable was at the right place. So something is wrong with the laser. The person that I got the ps3 from yesterday had left a disc inside since the last time he used it in 2016-17. Could that have damaged the laser?
So i took mine apart, and the first thing i noticed was the ribbon cable was gone, i thought, oh the last time i was in here i must not have plugged it in correctly and didn't reroute the cable, but no i find the very end of one of the cables, im mad asf
That's the EXACT problem I had on my PS3 Super Slim, the connection must have gotten loose over time. Thank you so much for showing this issue on camera, otherwise I probably would have never opened my PS3 and tried it myself 🙏
Look all things on mine is working except the laser is does i little one two 3 thingy then stops doesn’t even try and spin the disc I feel either the laser be broke it’s scratched or the connection is cut
Thank dude it helps a lot much respect
You should very proud yourself he fix it all by himself the PS3 Super Slim
help the cable is already plugged but it still wont spin
What’s all the screws so I can buy the right tools
the outer screws are just a small philips head. but the inside holding down the CD Drive is a special Torx T8 Security screw, i had the same problem but instead of waiting to buy one, i just grinded it down and used a flathead driver. hope this helps and im not too late lol 😁
Any idea how i take off the screws on the right side?
T9x50mm screwdriver
for the side screws near the blue one what type of screw driver do u need?
T9x50mm
Are you supposed to force that cable in or just push it?
I'm having a problem with my ps3 it picks up the game but when I click on the game it just goes blank what can I do to fix it
Hi bro did u fixed ? Same proboem here
Thanks bro very helpful I fixed mine
I just broke my power button and still have the problem 😔
0:46 how did you take that first top part off?! I have been strugling for an hour and still can't. Also my ps3 doesn't have any screw on the bottom , does this change anything?
Okay so 15 hours late but first you need to unscrew one of the security screw crews to take the first top part of, you can find the screws when you take off the right side panel by sliding it to the power button and when you do remove the top part make sure to be gentle since you can accidentally break the hooks that holds the top part. For the bottom screws take off the kind of stubs and you'll find them there and one of them is behind a label. That's all and good luck
You need a t8 security screwdriver to take off the top part
@@alostredditor3102 lol I have already broken one hook and the part that holds the security screws, I didn't realise they were connected and I went hard on it. But I can still secure the top part even without it.
@@alostredditor3102 I did everything on this vid and the cable was at the right place. So something is wrong with the laser. The person that I got the ps3 from yesterday had left a disc inside since the last time he used it in 2016-17. Could that have damaged the laser?
@@titto2602 most likely not since the people who made the ps3 would have already thought of a solution for that simple problem
Bro why didn't you show us while you inserted the disc for the first time😭but I'm scared to open my ps3
I’m confused, there weren’t any cuts it’s a full recording if that’s wym
Trust me bro it works
I can always do another video if that would help
@@lazyzayyyt plz do another one showing from the screen before you fix make sure you don't hide anything
Thank you so much bro it works
Glad to help
Bro its working !!!
Let’s go bro !
Thank you very much! 😌
Thanks bro i love you❤❤❤
So i took mine apart, and the first thing i noticed was the ribbon cable was gone, i thought, oh the last time i was in here i must not have plugged it in correctly and didn't reroute the cable, but no i find the very end of one of the cables, im mad asf
Thanks that's work
well this is useless u still need a special screwdriver i fuckin hate sony
The screwdriver I used was a T9x50mm which was like 5$ on amazon
Go to a 99 cent mark bro and they’ll have it for certain