How to remove rear wheel 2019 Harley Davidson Road Glide DIY
Вставка
- Опубліковано 7 вер 2024
- How to remove the rear wheel on a 2019 Roadglide Special. These tips can also be used on other touring bikes. I am installing the Michelin Commander II tires. This video is for entertainment purposes only. Thanks for watching.
Brilliant point PBD! Learning how to lose can set you up for victory
Outstanding job..... You explain better than the service manual.
I took apart my buddies 2019 Road King special and this vid was step by step instructions. Go it out in no time 🤙
Thanks. I need to do this on my '18 Road King in the next week to replace the tire. This helped a lot and I may record my install to pay it forward. I think I'm going with Commander III
Happy to help. Hope it makes it easier for you. I have the Michelin Commander 3 on my bike now and did a 5200 mile trip in August. (I posted videos of the trip) Awesome tires. Wet and dry roads.
I just want to thank you I literally use your videos every tire replacement 💯
Hell yeah Side are mechanical service.. after watch this I decided to just do it myself and save 60 bucks ty bro for the vid.. ya made it easy and with the gun ya made it safe lol.. good stuff ty
Thanks, that's why I'm making these videos.
@@cliffcares6455 I put the rear abs censor on then the caliper does the spacer go between the caliber and the swing arm?
quakemater What do you ride?
Top tip, many motorcycle lifts have a removable panel in the rear deck to help remove the wheel assembly easier. In this video I believe his had this panel, you can see it in orange.
Excellent video you. This is the best DIY rear wheel out here so far. I have Rhinharts also, this is a much easier job without canister removal and install.
Pete Larrier Thanks. That’s a big reason for me making these videos.
video may have been better if you shown the rubber insert back in, the belt tensioning tool (to help others, who dont have the feel of what is in within specs) besides that thanks for sharing, it made me appreciate having someone sharing how they do it...
Not sure why I didn’t show installing the rear wheel rubber piece. I do in my other videos. If you like to see that. Watch one of my other Road Glide, Street Glide or Road King. As for the belt tension tool. I don’t where I put it. lol
@@cliffcares6455 yea some of these tools, just up and walk around here...
Thanks for the heads up on this task. Good descriptions, thanks again.
Welcome and hope it helps. Check out some of my other videos of RG and SG bikes for a different video angle. Ride safe.
That way is very helpful the very first touring bike I did was a 12 road King and we were fighting with the thing I didn't think to take off the suspension Great video
Great Video! I'm doing my 2nd rear tire install this evening.
Kerrian Chambers Thanks. Hope this video helped.
Just came across your video on my feed. Great job!
Love your side arm.
Caulked and ready to roll.
I’m in Canada. Unfortunately, we can’t carry here. :(
Great video. Only thing i do different is ,I use blue lock tight on everything. The anticize was a good touch . But thread lock on the axle nut threads will keep it there. Over all good video.
Makes it look like a piece of cake, which it actually is !!! Thanks great job!!!
After doing it so many times. I got it down to about 30 minutes. Removing the wheel. Changing the tire and installing the wheel.
You forgot to include that pistol in the "required tools". Just kidding. Great video. Thanks for sharing.
lol. Everyone has a set of tools they like to use.
Thanks.Very clear, you make it look easy!
Thanks. I’ve done good amount of this bikes. From watching others on UA-cam and from doing. I think I’ve come up with a pretty good system. I’m averaging 30-40 minutes from start to finish just changing the rear tire on Harley touring bikes.
Wow. Great video!!! Thanks man!!!
Thank you for the tip.
Great job you make it look easy
Excellent video ty!
Not trying to be a clown, serious question, is the wheel straight? I thought the cam adjusters should be an even amount side to side but it didn't look like they were? Really like the idea of dropping the swing arm by unbolting the shocks...doing that one for sure 👍
Thanks for the tutorial. I can do this now.
Great work, Cliff. I see you practice your 2nd amendment as well.
Good video. Easy to understand. Thanks!
Welcome and thanks for watching.
awesome vid. The only remark is that you didn't show in details how to tighten the belt for those who do it first time.
Good video. Changing mine today.
Thanks. Ride safe.
When you disconnect bottom shock bolt is the bike jacked up when doing that??
Very nice details. Thank you
thanks for the info,very helpful
Bruce Sorensen Welcome.
Your video was amazing just wanna say thanks
Thanks for the video. Excellent camera placement and explanation. Now I feel confident to go out a ruin my bike. Just kidding. Looks easy enough!!
Nice job! Glad to see you had Roscoe with you.
How many miles out of that tire?
I got over 10k miles. Then I put on the Commander 3 tires. Before changing them. They looked like I could get another 10k out of them.
Exelent video , THANK YOU!!!
Thanks. Ride safe.
merci , bon travail
Does that 45 come in handy for wheel changes?
Should have set your lift up so you could use the drop out panel ;-))) gd. job Peace;-)
Thanks for wayching. I’ve tried using it but I find it’s easier for me to slide the tire out.
Huge thanx very helpful 👍🏽😎
Thanks for the video... what brand tire are you running? And what kind of mileage are you getting out of a tire ?
I installed the Michelin Commander 2 in the video. Got over 10k miles before putting on the Commander 3 but the 2’s looked like they had another 10k left.
Thank you for your video, only wondering why do you caring loaded gun in your garage...don't take it personally
I carry most of the time. Like how people carry phone, wallet, keys. I’m glad I do carry most of the time. Unfortunately there was a large lose dog trying to get a group of small kids in front of my house while I was in the garage. Came outside to see what was going on. Then the dog came at me. Got me pinned up to my garage door and had to put it down. Now that’s the only time I had to actually use it but have needed it a few times before. There’s crazy people out there. Had a guy try getting in my car at the light. Wouldn’t stop till he saw that he had a gun pointing at him.
Can you tell me what is the torque? everything please
Thanks cliff, saved quite a bit of money. Ride save.! Greetings from fucking Germany.!
Good shit and nice 1911
Where to find torque specs
Good video
Glad you enjoyed
Which scissor jack do you have? It looks like it bolts to the lift. Mine doesn’t give much confidence when using it on my lift. It slides around a bit
yep would be nice to know???
Great video but I didn’t get do the cam lobes for the belt need setting both sides? Good luck with the channel 👍
Sorry for the late reply. Thought I already did. The cam washers both adjust the belt and keep the wheel straight with the bike. When you turn the axle, it will turn both washers at the same time.
Thank you Well done!
Does the abs sensor go closest to the swingarm on the outside ? Or inside closest to the wheel ?
Excellent vid - Helpful - Thanks
Thought - No requirement for any lock tight?
Nope. As long as you torque everything to spec.
@@cliffcares6455 No worries - Cheers.
Thank you...
Brent Rawson Thanks
Nice 45
Nice video...what kind of tire you go with? looks like commander II....thx
Thanks. Yes the Michelin Commander II but then later upgraded to the 3s.
Thanks
You're welcome. Ride safe.
What torque wrench do you recommend and what size and capacity? Thanks!!!
I use a Snap-on 3/8 drive 5-100 ft-lb. If you have a 2019 and older. That range should works for just about everything. If you have a 2020 or newer. You'll need one that goes to 150 ft lb. They increased the re-axle torque to 135-145 ft lb. As far as a wrench. Any name brand would be go for accurate torques. I'd stay away from the Harbor.
GOD BLESS TEXAS!!!
i guess it is kind of randomly asking but do anybody know a good site to watch new tv shows online?
@Huxley Aydin i use Flixzone. You can find it on google =)
@Damon Ahmed yea, I have been using Flixzone for months myself :D
@Damon Ahmed yup, I've been watching on FlixZone for years myself :)
@Damon Ahmed Thank you, I signed up and it seems like a nice service =) Appreciate it !
Why do you keep the hammer on your pistol cocked?
Is this tire removal the same for a newer soft tail model...👍
I’d say somewhat similar but exactly. I do have a video on a softail and a heritage softail. Check them out and see if they are a little closer to what you ride. Thanks Cliff.
Hi, what size socket for the cone/axel nut ? Did you say 36mm? Or is it 33mm?
36mm
@@cliffcares6455 would that be the same size for a 2015 ultra limited low? 36mm?
Yes. It should be the same process of removing the wheel as the Road Glide in this video.
How tall does your jack lift the bike?
Little over a foot.
Like
Hey bro, I have a 08 SG, w/ the skinny rear tire. Is it possible to swap to this ? I already have the front 19"
From what I can tell it more in likely won't fit. Your bike comes w/ a MU85-16 or 140/90-16. My bike has a 180/55-18 and the more common size is 180/65-16. That's a 40mm or about 1.5 inches wider tire. You would need a wider swing arm and rear fender. Possibly more to make it fit.
@@cliffcares6455 thanks bro!
B
Stay strapped or get clapped.
Gun safety should always be #1 priority! The hammer is fully cocked on your sidearm my friend….
I know. It’s a 1911. That’s how you’re suppose to carry them.