How-To: Massey Ferguson 2650 Clutch Replacement

In this video Clint will walk you through the procedure to replace the clutch on a Massey Ferguson 2650 HD Series tractor. This video includes several the disassembly and separation of the machine, removal of the clutch assembly and cleaning of the housing, as well as the installation of the new parts and the reassembly of the tractor.
If you have any questions please leave a comment below!
Subscribe for more Massey Ferguson repair videos and How-To's for a range of tractors and equipment, including the 2000 series, 1100 series, and 100 series.

[@John-Rayburn]

I have a 2680 HD and the clutch will not disengage completely. Going to start on it this evening and so glad I found this video. There's not a lot of videos like this for 2000 series Masseys. Thanks for posting this, very helpful.

[@jonsmith7109]

Thank you for filming this. Just a wonderfully clear video

[@robmiller2919]

Yes , definitely need part 2 of 2000 series.

[@joepiette5115]

Thank you so much.

[@roc31539]

Most impressive skills. No small task. Thanks

[@krisostash3513]

Don't need to gas the ac system off. You can unbolt the condenser and the compressor and fold everything into the cab.

[@jonsmith7109]

Smart.

[@dominickamuchele3032]

Great idea!! Thanks.👍

[@ericlindal8008]

Great job! You make it look easy.

[@hubertrobinson8825]

In the repair manual it shows 3 T shaped bolts use to compress the pressure plate before unbolting the 6 bolts holding it to the flywheel

[@cineminded]

This was a very nice and clear video , thanks !

[@SirRodericSpode]

Thanks for the video and taking the time and effort to share. (Please be aware that venting R134a is bad practice and often prohibited in many countries due to o-zone damage, so take the time to recover it)

[@greenhillgarage]

Hey Clint,
I found your channel when you started that Massey Ferguson 2000 series powershift teardown. Did you ever fix it and how did you do it?
Any advice is appreciated!
Thanks!
Greenhill Garage

[@dhoutdoorvids6674]

Is there a way to check or adjust the clutch without splitting the tractor? I have a 2680 and the clutch pedal is not engaging until the very end of the stroke

[@feneosgods1212]

We need part 2 of the mf 2000 series powershift

[@robertnavarro9799]

Hi Is your clutch alignment tool a 23 sprains I can find one for my 2640 Massey

[@farmgpa]

Mine is a lathed shaft that fits into the clutch disc and then lathed small on the end to fit the pilot bearing, it does not have any splines.

[@michaellopez6134]

I just finished installing my clutch and for some reason the clutch pedal is sitting on the floor. How do i adjust it.

[@farmgpa]

Did you replace the pressure plate assembly. if so did you take out the three bolts that hold it compressed for assembly. Otherwise the adjustment is on the out side.

[@michaellopez6134]

How much do you charge for a job like this?

[@Ranchready496]

Hell of a job! You made it look easy!🫡👏🍻👍